Used Saw Mill Machine for sale (84,230)

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Dedpfx Aboq Evn Es Tscr Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: new, Year of construction: 2025, Technical Specifications Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Dodpfx Absvmyale Tscr Input Voltage: 220V (50Hz) Protection Fuse: 220V / 40A Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Weight: 294Kg

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Dcjdsxdbzbopfx Ab Ter Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Dodpfem Rg H Rox Ab Tjcr Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: good (used), functionality: fully functional, Technical data : Saw motor, pole-changing 1.0 / 1.6 kW 6 cutting speeds : Motor speed 1/2 8 , 10 , 12.5 m/min and 16 , 20 , 25 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm . Saw blades 315 / 360 mm Hydraulic saw feed Hydraulic material feed, min. 10 mm Hydraulic material clamping 2 additional saw blades . --> --> Special price : EUR 4.150,-- net , free loaded ! . . Dodoxbbi Tepfx Ab Tecr

Condition: new, Year of construction: 2025, CORMAK BS530H Metal Band Saw – A Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal band saw is an efficient semi-automatic bandsaw designed for precise cutting of steel elements, pipes, and profiles at various angles. Its solid cast-iron construction, reinforced blade guidance system, and advanced hydraulics make it ideal for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all functions, significantly reducing operation time and improving workplace ergonomics. Key Advantages of the Machine Semi-automatic operation – hydraulic arm lifting/lowering and vise control via control panel. Worm gearbox with bronze components ensures smooth, vibration-free, and precise operation. Stepless cutting speed adjustment from 20 to 70 m/min – suitable for various materials. Carbide and ball-bearing blade guides for durability and precise blade tracking. Quick-release vise, manually or hydraulically controlled, adjustable left/right. Miter cutting range from -45° to +60° with precise angle scale reading. Heavy-duty cast-iron frame ensures cutting stability and long machine life. Hydraulic feed rate control with adjustable return height of the saw arm. Construction and Technology The BS530H model features a reinforced drive system and industrial-grade hydraulics, ensuring reliable performance under intensive use. The massive frame construction minimizes vibration and ensures consistent cutting performance. An ergonomic control panel allows full process control from one location. The coolant system, integrated into the base, efficiently removes heat and debris, protecting the blade from overheating. Cutting Precision and Efficiency With stepless speed control, manual or semi-automatic operation modes, and a dial gauge blade tension meter, the BS530H delivers repeatable, high-quality cuts, even in long production runs. A material support roller and arm lock after the cutting cycle enhance operational safety and efficiency. Applications Dcodpfx Abjw U Svlj Ter The CORMAK BS530H is dedicated to industrial production facilities, metalworking shops, and companies performing serial cutting of profiles, pipes, and solid steel sections. It’s ideal for serial manufacturing, prefabrication, and component preparation for welding or further processing. Standard Equipment Control console with semi-automatic functions Hydraulic vise Blade cleaning brush Coolant system with pump Front material roller Dial gauge blade tension meter CE certificate and technical documentation (DTR) Technical Specifications: Parameter Value Working height 965 mm Cutting speed 20 – 70 m/min Blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Total power 3.0 kW Power supply voltage 400 V Dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm - or square-80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP Doded Aai Topfx Ab Tjcr -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds - saw table tiltable +/- 15 Dcedpfx Asiv A U Ejb Tsr - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Dsdpfx Asv Dvfrsb Tocr Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2026, functionality: fully functional, on stock! The GAP 100 automatic profile sharpening machine sharpens your gang saws and features a compact, extremely stable design, high functionality and excellent value for money. Highlights Hydro pneumatic return stroke of saw carriage Pneumatic saw blade clamping Precision linear guide for saw carriage Precision spindle height adjustment for saw blade width Fully enclosed protection hood with powerful water-cooling Feed speed regulator with frequency converter Grinding wheel dressing device Dust mist exhaust Lever control for 3 different tooth shapes Continuous tooth pitch adjustment Speed regulator for grinding wheel Dcjdpfeg Uzl Ejx Ab Ter Optical signaling device for process status recognition (3-color signal lamp)

Condition: ready for operation (used), functionality: fully functional, Panel saw, saw-milling machine TRIUMPH T3000 Specification: • Condition - used, serviced • Manufacturer - TRIUMPH • Model - T3000 • Sliding table length: 320 cm • Scoring saw with separate motor • Main saw motor - 4.0 kW • Milling spindle motor - 4.0 kW • Scoring saw motor - 0.7 kW • Milling spindle diameter: 35 mm • Main saw spindle diameter: 35 mm • Variable speed adjustment on the milling spindle (via belt) • Manual lifting and lowering of the saw blade • Extraction ports: 120 mm • Weight approx. 900 kg • Transport dimensions: 330 x 120 x 110 cm (L x W x H) Additional information: Djdpfx Ajw Snbxjb Tjcr • Good, original technical condition • Photos show the actual state of the item for sale • Possibility to power on and inspect the machine on site

Condition: new, The TITAN 43/20 CD+E firewood processor with joystick control cuts logs with a maximum diameter of ø 43 cm using a harvester bar and splits them with a splitting force of 20 tons. This is a combination machine (electric and PTO connection). Demonstration and inspection by appointment possible – the machine is currently in stock and available immediately. Warehouse clearance – special price – interim sale reserved. Dcedpfx Abjtrmg Hs Tjr

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Weight: 650 kg Djdpfx Aow R E Sljb Tjcr Certificate: CE

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears Dcsdpsdzp T Dofx Ab Tor (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Dcodpfxev Dvkze Ab Tjr Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Dcedpfxsv Exthe Ab Tsr

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm Dcedpfoq Ii Dljx Ab Tsr diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: ready for operation (used), Year of construction: 2017, Swift Jet Water Jet Cutting Machine Ex University Machine Cutting Area 1525 x 3050mm Z axis Clearance 220mm Tank Depth 840mm Water Pump Hypertherm HyPrecision 30Hp Positional Accuracy + - 0.015mm Traverse Speeds 15m/min Dcjdpsw Rg Saofx Ab Tor Advanced nesting and cutting software Collision Protection, heavy duty build that will cut almost any material with no heat distortion. *For sale with Jet Machinery Ltd* Stock No: 78971 Serial No: 1160111 Price: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Dsdpfxswd N Dae Ab Tocr Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: excellent (used), combined circular saw / milling machine / slot mortising machine - 30mm spindle Djdpfswzyx Asx Ab Tjcr

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Dcodpfx Aef N Ngbeb Tor Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 86731, saw blade diameter: 760 mm, tooth pitch: 25 mm, grinding wheel diameter: 200 mm, saw blade width: 8 mm, grinding wheel width: 32 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL SPECIFICATIONS Saw blade diameter: 140 – 760 mm Saw blade tooth pitch: 1 – 25 mm Number of teeth: 2 – 998 Saw blade thickness: up to 8 mm Grinding wheel dimensions: 200 x 32 mm MACHINE DETAILS Overall width: 1,500 mm Overall length: 1,500 mm Overall height: 2,000 mm Total weight: 1,500 kg Dcodowvi S Ujpfx Ab Tor Voltage: 400 V Frequency: 50 Hz Rated power: 8 kVA Current consumption: 16 A

Condition: used, functionality: unexamined, machine/vehicle number: 16124 91, saw band length: 4,100 mm, total length: 2,000 mm, total width: 1,150 mm, feed length X-axis: 1,200 mm, JAESPA W 320 G Horizontal Bandsaw Automatic 320 mm Dsdpfow Dzvnex Ab Tocr Hydraulically controlled horizontal bandsaw for solid and profile materials Cutting range round: approx. 320 mm Material clamping: hydraulic Saw band length: 4100–4170 mm Machine control: manual/hydraulic Type plate no.: 16124 91

Condition: used, Panel saw-milling machine Holzprofi FPSFM2000, good condition, 3 kW, 2200 mm table length, 100 mm cutting height, 2000 mm sliding table length, 500 kg Dcsdpfx Abowzzgbs Ter Price changes, errors, and printing mistakes reserved.

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350 Dcsdpfx Abeu Tqb Uj Tsr