Used Saw Blade Grinding Machine for sale (67,085)

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives for woodworking. Production from a straight blank or regrinding of used knives using a template. Includes a new grinding wheel and a new cooling lubricant pump. Technical data: Csdpo Ahm Ixefx Aiiori - Clamping length: 230 mm - Mandrel ⌀: 40 mm

Condition: good (used), For sale is our ferrite air-gap grinding machine. The machine is fully functional (power cord is missing) and in good condition. Includes a comprehensive range of accessories. The sale includes a large number of grinding tools and holders for virtually any application. We would be happy to answer any further questions about the machine. Crjdpfx Ae Af I Iisiisi

Condition: used, Cross Conveyor: - total length: 7000 mm - total width: 2300 mm - feed motor power: 0.75 kW Cjdpfx Ajxu E E Esiieri - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Condition: used, Year of construction: 2000, grinding length: 240 mm, feed length X-axis: 50 mm, feed length Y-axis: 50 mm, feed length Z-axis: 240 mm, grinding width: 300 mm, WEINIG RONDAMAT 970 – Profile and Tool Grinding Machine – Year of Manufacture 2000 For sale is a WEINIG Rondamat 970, year of manufacture 2000, a high-quality automatic profile and tool grinding machine from Michael Weinig AG. The machine is suitable for manufacturing and re-sharpening profile and planing knives, as well as for grinding tools and knife heads. Profile tools can be manufactured manually using a template and then automatically re-sharpened. The machine is also suitable for re-sharpening planing knives in the knife head. Technical Data * Manufacturer: Michael Weinig AG * Type: Rondamat R 970 * Year of Manufacture: 2000 * Machine No.: 91176 * Tool Diameter: 100–300 mm * Max. Tool Width: 240 mm * Grinding Wheel Diameter: 150–225 mm * Grinding Wheel Bore: 60 mm * Grinding Wheel Width: 2 / 3 / 4 / 10 mm * Grinding Spindle Speed: 1,500–3,000 RPM * Grinding Spindle Drive: 1.1 kW * Total Connected Load: approx. 2 kW * Coolant Tank: approx. 50 liters * Operating Voltage: 380 V / 50 Hz * Back Angle: 10–30° * Lateral Clearance Angle (manual): 0–20° * Lateral Clearance Angle (automatic): 2.5 / 5 / 7.5 / 10° * Relief Angle for Planing Knives: 60° * Automatic Indexing: up to 16 knives * Precision: Grinding tolerance under 0.005 mm. Suitable for: Credpfx Aisz Evaleisi * Profile knives * Planing knives

Condition: used, Year of construction: 1968, functionality: fully functional, 450 mm Länge x-travel 500 mm Codpfoqwpwzsx Aiieri workpiece height . mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Surface grinding machine TECHNICAL DETAILS Grinding area Cedpfx Aij Ad Iufoieri Grinding length: 760 mm Grinding width: 325 mm Distance from spindle center to table: 650 mm Grinding wheel Grinding wheel diameter: approx. 500 mm Magnetic chuck Magnetic chuck dimensions: 600 x 500 mm MACHINE DETAILS Manufacturer: Mägerle Type: MGC 180.32 Machine type: Surface grinding machine Machine number: 100369 Dimensions and weight Length: 5,000 mm Width: 3,000 mm Height: 3,500 mm Weight: 15,000 kg EQUIPMENT 2 electro-permanent magnetic chucks Important note: The grinding wheel possibly shown in the pictures is not included in the scope of sale and delivery!

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor hole diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal, 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, outfeed - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - saw blade cleaning - extraction nozzle diameter 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German production – floating blade – laser 3 pcs – saw blade cleaning – additional sleeve for multi-blade saw – pneumatically adjustable guide rail – stepless speed adjustment – used multi-blade saw, very good condition Net price: 136900 PLN Net price: 31837 EUR depending on the exchange rate of 4.30 EUR Crodpozrmqwjfx Aiiji (Prices may vary with larger fluctuations)

Condition: used, functionality: not functional, rotary table diameter: 1,000 mm, total height: 2,900 mm, total width: 2,400 mm, total length: 3,700 mm, overall weight: 10,000 kg, type of input current: three-phase, table diameter: 1,000 mm, We offer this used ELB-Schliff rotary table grinding machine. A rough footprint is 3700mm L x 2400mm H x 2900mm H. Crodps Aat Ntsfx Aiioi 1000mm diameter table. It has a horizontal spindle (Not segmented wheel). Slides look really nice, however it requires electrical upgrade. Mechanically the grinder is in excellent condition. The magnetic chuck & slideways appear to be in excellent condition. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Cedpfx Asvvkipjiisri

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. Crsdezwhuhspfx Aiisi It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Saw blade diameter [mm] 80–500 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Weight 800 kg Total power requirement 3 kw Crodpfx Asv A Hgwoiioi

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 1-phase 230V Cjdpfx Ae Agwkxjiijri Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: Cjdpfx Aiov Tcy Usieri - Coolant system - Hydraulic unit - Documentation Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Codpfx Aj Adu Swjiieri Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Crjdpfj Af Hd Iox Aiisi Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking 6-meter roller conveyor

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 777, functionality: fully functional, input frequency: 50 Hz, overall weight: 3,500 kg, Machine used for less than one year, in brand new condition. Cedpfs Agww Djx Aiieri

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Cedpfx Aijypbx Eeiori Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: good (used), Year of construction: 1987, functionality: fully functional, grinding length: 1,000 mm, grinding width: 510 mm, total height: 2,400 mm, total length: 5,500 mm, total width: 2,500 mm, grinding height: 300 mm, grinding wheel diameter: 400 mm, table length: 1,000 mm, table load: 400 kg, table width: 510 mm, grinding wheel width: 80 mm, Our trusty Elb Schliff surface grinding machine of the type Orion 1052 NPC -1 is for sale. The machine is fully functional and ready for immediate use Technical data: Magnetic table L*W: 1000*510 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm max. sanding height: 300 mm Coolant system available Loading and transport can be organized on request, for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Codpfetr D A Djx Aiiori Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, machine/vehicle number: 208 597, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Hauser Machine Type: Coordinate Grinding Machine Type: 3SMO Machine Weight: approx. 2 t Working Area X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding wheel diameter: 220 mm Overhang: 310 mm Angle range: 12° Vertical grinding slide adjustment: 110 mm Workpiece weight: max. 80 kg Work Table Table area: 600 × 320 mm Grinding Spindle Grinding spindle speed: max. 50,000 rpm Peripheral speed: max. 35 m/s Feed Rate Feed rate: 0–6 m/min Dimensions Space requirement: approx. 1.2 × 1.3 × 2.3 m EQUIPMENT Heidenhain 2-axis digital display Electrical control Crods Aaz Evepfx Aiiji Work light Chip guard

Condition: good (used), Surface grinding machine Manufacturer: Harig Credpfjz Hzyysx Aiiji Stock number: 2965-4 Year of manufacture: Machine number: Type: Super 612 Grinding length: 300 mm Grinding width: 175 mm Table clamping surface: 300 x 150 mm Magnet: 250 x 120 mm Vertical adjustment: 250 mm Table movement, longitudinal: 330 mm, manual Table movement, transverse: 175 mm, manual Spindle speed: 3,600 rpm Grinding wheels: 200 x 20 x 51 mm Connection: kW Accessories/Equipment: Condition: good Weight: t Dimensions: 870 x 900 x 1,900 mm

Condition: used, Year of construction: 1954, functionality: fully functional, grinding length 600 mm grinding width 205 mm x-travel 600 mm Crsdpfx Aievu Hkyeiei ja

Condition: new, Year of construction: 2005, Carriage length: 2000 mm Cutting width at rip fence: 700 mm Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Speeds: 1 Motor power: 4 kW Motor brake: yes – automatic Csdpfxsxrbh Ro Aiiori Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Codpfxj Agfzbj Aiijri Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: used, Technical specifications to follow Crjdpsml H Nsfx Aiisi

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 400 mm max. module: 10 min. module: 0,3 weight of the machine ca.: 11,5 t dimensions of the machine ca.: 3,3 x 2,75 x 2,8 m max. number of teeth: 999 min. number of teeth: 5 Width of teeth: 0-300 mm Crjdpfo Ah Sc Ijx Aiiei pressure angle max.: 30 pressure angle min.: 14 workpiece weight max.: 300 kg worm grinding diameter: 300...205 mm width of grinding worm: 125+0,7 / -0,5 mm boring diameter: 160 H7 mm