Rock Drill

Sandvik Tamrock PANTERA 900

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m Codpfsv Nhyfsx Aa Esgp

Condition: repair required (used), Year of construction: 2013, operating hours: 33,439 h, - Volvo L180G Cgjdpfxju Ef Hrj Aa Esp - Year of production 2013 - Mileage 33,439 Mtg - Transmission after major overhaul - 340 mtg. - Engine compartment burnt out - condition shown in photos

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Cgjdpfx Aajlhqd Rj Eop Aviable: 30.01.2025

Condition: ready for operation (used), functionality: fully functional, power: 78 kW (106.05 HP), fuel type: diesel, Year of construction: 1992, operating hours: 10,027 h, Equipment: cabin, Tire size: 10.00-20 Lifting speed: 66 m/min Operating weight: 22000 kg Cedpervgyxefx Aa Ejgp Load hook: 20000 kg Boom design: upper section 3500 mm / lower section 3500 mm / intermediate section / 3000 mm / intermediate section 1500 mm Basic equipment: with 4-point sliding beam support Engine manufacturer / type / power: Deutz / F6L 912 / 78 kW Max. Load capacity: 25000 kg Extension length: 11500 mm

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,880 h, load capacity: 5,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Codpfx Aex Ixn Noa Eogp Load centre: 600 Mast type: Telescopic Transmission: Hydrostatic Technical condition: Good Front tyres type: Pneumatic Front tyres size: 445 / 65 R22.5 Front tyres condition: 60 - 80% Rear tyres type: Pneumatic Rear tyres size: 445 / 65 R22.5 Rear tyres condition: 60 - 80% Third hydraulic valve, Remote control on request, supplied with bucket or light material bucket (1000 or 1500 litre), swivelling man basket.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Codpfjghgd Isx Aa Ejgp The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Cedpfoupwx Hsx Aa Eogp Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: like new (used), Year of construction: 1995, manufacturer: Kleemann Cgoder A Dm Sepfx Aa Esp year of construction: 1995 type: SHB 10/90 opening size: 1020 x 900 mm impactor weight: ca. 14,9 to

Condition: excellent (used), Offered is a used slurry pump / sewage pump. SDAG Wismut-Aue. Cgjdpfx Aashwnfcj Eep Details see photos.

Condition: used, Year of construction: 2005, functionality: fully functional, 630 kVA transformer station, year of manufacture 2005, Bockenem UK1700-30, 630 kVA oil transformer, 20kV±2x2.5%/400 V, AREVA, DCU3834 with HV plug-in bushings AK, LV Pfisterer terminals. Cgedpfsxzq Dtjx Aa Eep