Used Sales Tents for sale (26,001)

Condition: used, maximum load weight: 12,460 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,670 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 2,975 mm, Year of construction: 2022, Vehicle no. G0123145_1 – Manufacturer: Krone. * Simple corner brackets * Outline marking on the side/rear * Load certificate Code-XL * Roll-up rear door (aluminum) * Keyhole system inside * Front wall recess * Telescopic support legs * Device for rail loading Kdodpfoz A Rkajx Ah Eot Double-deck configuration without double-deck load beams (available at an extra cost!). Financing available upon request. Delivery time: IMMEDIATELY. Newly painted. Technically ready for operation, body and support legs newly painted. Chassis (KTL) cleaned and treated with underbody protection. Valid UVV inspection. UVV documents available. The swap body has been newly painted in pure white (RAL 9010). PAINT – NEW!!!. LASI CODE XL!!! Dimensions are approximate. Offer is subject to change; prior sale is reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 13,140 kg, overall weight: 16,000 kg, first registration: 01/2008, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2008, Trailer No. G0123629_1 – Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminum) * Keyhole system inside Kdedpfxjz A Rlde Ah Eot * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Storage container: Weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs required. Substructure with signs of wear, some rust. Isolated paint peeling on components of the demountable body. Isolated rust on components of the demountable body. Deformations/stops on components – see images. Dimensions are approximate. Offer is subject to change; sale is reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request, please contact us by phone or email.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 2,500 mm, Year of construction: 2013, Wagon No. G0113716_1 – Manufacturer: Krone. * Simple corner fittings * Suitable for forklift access * Fixed support legs * Equipment for rail transport * Lashing pockets * Lashing options Kodpez A Rlwefx Ah Esdt Financing on request. Financing available. NEW paintwork: RAL color of your choice possible when ordering! Delivery time upon consultation! Newly painted. Technically ready for operation, superstructure and support legs newly painted. Chassis (KTL) cleaned and treated with underbody protection. UVV valid. UVV documentation available. NEW PAINT!!! Dimensions are approximate. Offer subject to prior sale, prices are net ex location D-59302 Oelde. More details upon consultation via phone or email:

Condition: used, maximum load weight: 13,260 kg, overall weight: 16,000 kg, first registration: 01/2002, loading space length: 7,320 mm, loading space width: 2,470 mm, loading space height: 2,475 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2002, Chassis No. G0124487_1 – Manufacturer: Krone. * Simple corner brackets * Roll-up door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading Kodpfx Aez A Rtnoh Eodt * Lashing points Storage container: Weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs needed. Substructure with signs of use, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Dimensions are approximate. Offer subject to change; interim sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2014, Wagon no. G0101011_1- Manufacturer: Krone. * Double-decker equipment * Double corner fittings * Contour marking side/rear * Load certificate Code-XL * Portal door double espagnolette locks (outside) * Keyhole system inside * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing options Kjdpjz A Rtuofx Ah Ejdt Double-decker equipment without double-decker loading beams (available at extra cost!). Financing on request. Financing possible. NEW paint finish: Color selection in RAL. color possible when ordering! Delivery time after consultation! Technically ready for use, body and support legs newly painted. Door seals NEW ! Underbody (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Condition: used, maximum load weight: 13,340 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2007, Container No. G0124686_1 – Manufacturer: Krone. * Simple corner fittings * Roller shutter door (aluminum) * Fixed support legs * Device for rail loading * Lashing points Kdodez A Ricopfx Ah Eot Weatherproof storage container, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Underframe with signs of wear, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Deformations/stops on components – see images. Dimensions are approximate. Offer subject to change; we reserve the right of prior sale. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, maximum load weight: 12,880 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,625 mm, loading space volume: 52 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 2,850 mm, Year of construction: 2018, Vehicle No. G0123148 – Manufacturer: Krone. * Simple corner brackets * Outline marking on the side/rear * Load certificate Code-XL * Keyhole system inside * Forklift accessible Kedpez A Ripjfx Ah Esdt * Front wall niche * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points Financing available upon request. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Partial paint job. Chassis (KTL) coating with signs of wear. Valid UVV certification. UVV documents available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Kdedpfoz A Tzbex Ah Est Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Kjdjz A Ty Djpfx Ah Eedt Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Kdjdpjz A T Dcjfx Ah Ejt Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: as good as new (ex-display), Year of construction: 2026, For sale is a new, automatic bandsaw BEHRINGER HBE321A Dynamic, manufactured in 2026. This machine is our demonstration unit – it has been assembled and connected in our facility. You can view the machine in person, test it, and perform trial cuts with various materials. The BEHRINGER HBE321A Dynamic is a modern, fully automatic bandsaw designed for precise and efficient metal cutting. The machine is suitable for cutting solid material, pipes, and various profiles, as well as harder-to-machine metals. Key Information Manufacturer: BEHRINGER Model: HBE321A Dynamic Year of Manufacture: 2026 Condition: New / Demonstration Machine Kdedpfx Asz A R Nceh Ejt Type: Automatic Horizontal Bandsaw Cutting Capabilities Round material 90°: Ø 320 mm Rectangular material 90°: 350 × 320 mm Minimum dimension of round material: Ø 10 mm Minimum dimension of rectangular material: 10 × 8 mm Automatic feed stroke: 650 mm Minimum remaining material in automatic mode: 70 mm Technical Specifications Cutting blade speed: 15–110 m/min Cutting blade dimensions: 4440 × 34 × 1.1 mm Main motor power: 2.6 kW Total power: 3.7 kW Saw feed: servo drive with ball screw Material feed: ball screw Material clamping: hydraulic Blade cleaning: electrically powered chip brush Control and Automation The machine is equipped with the BEHRINGER BehrCtrl10 touch control system, which allows for convenient control of the automatic cutting process. The servo-controlled saw feed with cutting pressure control automatically reacts to the changing cross-section of the material. The automatic blade guide adjusts to different material dimensions, eliminating the need for manual adjustment when changing workpieces. Construction and Equipment BehrCtrl10 touch control Automatic material feed Servo-controlled saw feed Cutting pressure control Automatic blade guide Hydraulic material clamping Dual material clamping Electric blade cleaning brush Fully enclosed work area The robust cast iron saw frame reduces vibrations and helps ensure stable and accurate cutting. The manufacturer also states that the modern gear and hydraulic solutions used in the HBE Dynamic series reduce energy consumption compared to the previous generation model. Dimensions and Weight Length: 1850 mm Width: 2300 mm Height: 1880 mm Weight: approximately 1900 kg Material feed height: 800 mm If you have any further questions, please do not hesitate to ask.

Condition: ready for operation (used), Year of construction: 1995, punching force: 22 t, total height: 2,300 mm, total width: 6,000 mm, sheet thickness (max.): 6 mm, overall weight: 11,050 kg, product length (max.): 6,900 mm, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine. • Condition: In working condition; normal signs of use (scratches/dirt, especially near punch head); floor wear visible • Max sheet thickness (steel): 6 mm • Note: Current tooling set is suitable for up to 1.5 mm sheet thickness • Max punch diameter: 76.2 mm • Max workpiece weight: 150 kg • Working range: X = 2500 mm without repositioning (4 m sheets previously processed using repositioning/extension tables); Y = 1250 mm Kjdoz Azurjpfx Ah Eodt • Axis speeds: X up to 90 m/min; Y up to 60 m/min • Stroke rate (nibbling): up to 900 strokes/min • Table/Design: Flat perforated work table; mechanical punching head with hydraulic/pneumatic lines; long material support arm; control panel on cabinet with display, controls, and emergency stop • Utilities: 400 V / 50 Hz / 3-phase; connected load approx. 17 kVA; compressed air 6 bar Additional equipment • Large set of punches, dies, and tool holders (complete tooling set) • Large metal cabinet with shelving for tool storage • Metal scrap container on casters (under-table)

Condition: good (used), Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos Ksdpfju S Tbbjx Ah Ejdt -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: ET1UA25015078612, This is an Ultravent hood from the manufacturer Rational, type UV 61/101/E, 60.75.134, manufactured in 2025. It is suitable for iCombi classic and iCombi Pro appliances. The hood has been inspected in our in-house workshop and is fully functional, including the matching connection kit. The list price of the hood is: €4,465 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new items. We will be happy to advise you on all appliance types. Our used appliance service for you: * 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs * High-quality branded appliances at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional – or your money back * Flexible shipping or self-collection options * Competent advice – before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 854 x 885 x 313 mm * Power connection: V: 230 / Hz: 50-60 * Article number: 60.75.134 Kdjdpfoy N Umwjx Ah Eot * Serial number: ET1UA25015078612 * Year of manufacture: 01/2025 Condition: Used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2023, functionality: fully functional, In this listing, you are purchasing a second-hand “Fuji Acuity Prime L” flatbed printer Item for sale: 1 x Fuji Acuity Prime L Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. Kdjdpfx Ahoz Ay E No Eot A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. Kdjdpez A Ahqsfx Ah Eot • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,274 h, pressing force: 6 t, total height: 2,580 mm, controller manufacturer: DELEM, controller model: DA-66T, product length (max.): 2,100 mm, number of axes: 6, This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details. • CNC axes: Y1, Y2, X, R, Z1, Z2 • Bending unit: • Max. approach speed: 160 mm/s • CNC backgauge: • CNC-controlled axes: X, R, Z1, Z2 • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 250 mm • R-axis speed: 350 mm/s • Servo-motorized CNC backgauge • X-axis servo motor with ball-screw drive • Z1 and Z2 CNC-controlled backgauge fingers • Backgauge positioning accuracy: up to 0.05 mm • Safety: Kjdpfsz A Aa Tex Ah Eodt • Side safety guards • Safety system for bending area • Tooling style: Amada (Promecam) • Electrical: • Main motor power: 7.5 kW • Power supply: 400 V, 3-phase, 50 Hz • Nominal current: 18 A • Control voltage: 24 V Additional equipment • Segmented upper punch tooling • Multi-V lower die • Front sheet support table / support arms • Foot pedal control Technical Specification Bending Length 1270 mm

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imageFORMULA DR-G2140” document scanner Item for sale: 1x Canon imageFORMULA DR-G2140 with the following features: Kedpfoz Az Sbsx Ah Esdt Includes duplex scanner Meter readings: Total: approx. 3,125,070 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand accessory: the ‘Canon Booklet Finisher-AG1’ finishing system Item for sale: 1 x Canon Booklet Finisher-AG1 Condition: Ksdpoz A Aibofx Ah Esdt This listing is for a second-hand accessory, which may show signs of wear (minor scratches or discolouration). The accessory has been tested to ensure it is in working order. Packaging and dispatch: You are welcome to view the item during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Kjdpfx Ahez A Tzus Eodt Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Technical Specification Taper Size BT 40 Through-spindle Coolant Yes Ksdpfszimp Usx Ah Esdt

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer subject to change and prior sale reserved > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the images > Frame/body: Colour RAL 9005 / black > Suitable for BDF bodies 7.45 with support height from 1,020 to 1,320 mm > Ride height unladen: 1,080 mm > Tyres: 4 x 445/45 R19.5, in good condition > Axles: Brand BPW > Braking system: EBS 4S/3M > Towing drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with 40 mm towing eye Kdedpfoz A Rn Ejx Ah Ejt > Main inspection + safety inspection current / NEW > Air connections: DUOMATIC > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear impact protection > Immediately available, multiple units in stock > Price ex location D-59269 Beckum

Condition: used, maximum load weight: 12,620 kg, overall weight: 16,000 kg, first registration: 01/2021, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, loading space volume: 49 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2021, Vehicle No. G0119995_1 – Manufacturer: Krone. * Double-deck configuration * Simple corner fittings * Contour marking on the side/rear * Load certificate Code-XL * Portal door with double swivel latch locks (exterior) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Kdedpsz A Rp Njfx Ah Eot Double-deck configuration without double-deck load beams (available at an extra charge!). Delivery time: IMMEDIATELY. Portal door with double swivel latch locks (exterior). Technically ready for use without further repairs. Partial paint job. Underframe (cataphoretic coating) with signs of wear. Valid UVV certificate. UVV documentation available. LASI CODE XL!!! Dimensions are approximate. Offer subject to change; sale is subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 12,600 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,565 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0115587_1 – Manufacturer: Krone. * Simple corner fittings * Contour marking on the side/rear * Load certificate Code-XL * Roller shutter door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading * Partially keyhole system inside Financing available upon request. Financing possible. Delivery time: IMMEDIATELY. Newly painted. Technically ready for operation, body and support legs newly painted. Substructure (KTL) cleaned and treated with underbody protection. Valid UVV certificate. UVV documents available. PAINT NEW!!! Kdjdsz A Rqyjpfx Ah Eot Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 13,320 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Vehicle No. G0124503_1 - Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminum) * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Lashing points * Partially equipped with keyhole system inside Storage container: weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use without further repairs. Undercarriage shows signs of use. Isolated paint chipping on components of the interchangeable body. Isolated minor rust on components of the interchangeable body. Deformations/stops on components - see pictures. Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email. Kdsdpfxoz A Rrkj Ah Est