Used Round Knife for sale (8,643)

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Ijdpfx Ahewdwiqs Neal Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Stainless Steel Jakob Pipe Diameter 80 mm 5x 985 mm straight lengths 1x 90-degree bend 1x 30-degree bend 7x clamping ring 1x suspension bracket See our other listings VMA Wekerom Isdpsx Nyl Esfx Ah Neal

Condition: excellent (used), Knife grinder MVM model KS with tilting magnet mm 1500 long Iedpfxox Hp Svo Ah Neal

Condition: used, Complete round timber sorting line / debarking system / log yard, consisting of: - 2-section round timber infeed (total of 8 decks) - Log feeder Ijdpexb N U Defx Ah Neal - Log aligner - Log transfer carriage - Bruks root reducer - Cross-cut saw for long logs - Cross conveyor - Log transfer carriage - Infeed to debarking - CHE Johanson 660 SH debarking machine - Sprecher Automation SELSCAN 512 log measurement system (year of manufacture: 2002) - Sorting conveyor - Log boxes: 8 left, 8 right (with overflow boxes for long logs) - Switch cabinets - Control system - Bark scraper conveyor Immediately available – Location: Austria near Linz

Condition: like new (used), Year of construction: 2020, Features of Rotary Table: - Designed for Fanuc controllers - Side-mounted motor with reduced backlash - Double worm gear for easy adjustment and higher precision - Detron-exclusive dual-piston braking system for increased clamping force Technical Specifications: - Table diameter: 255 mm - Center bore diameter: 65H7 mm - Table height (horizontal): 190 mm - Center height: 160 mm - T-slot width: 12H7 mm - Guide block width: 18 mm - Clamping method/pressure: 5–7 bar Iaodpsx E Tazjfx Ah Njl - Clamping torque: 400 Nm - Transmission ratio: 1/72 - Maximum table speed: 53.3 rpm - Permissible moment of inertia (W.D28): 1.38 kg/m2 - Resolution: 0.001° - Indexing accuracy: 20 seconds - Repeatability: 6 seconds - Net weight (without servomotor): 67 kg - Permissible load capacity (vertical): 125 kg - Permissible load capacity (horizontal): 250 kg - Permissible load with tailstock: 250 kg - Permissible clamping load (table clamped): F: 17,000 N - Permissible clamping load (table clamped): FXL: 1,265 Nm - Permissible clamping load (with table locked): FXL (diagonal): 400 Nm - Permissible cutting torque: 260 Nm - Maximum permissible number of rotary joints: 4 Features of Tailstock: - Manual tailstock with removable Morse taper - Fully sealed unit - Center height: 160 mm

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm tool width max.: 230 mm Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. Iaedpfelf H Tgox Ah Nol * Incl. new coolant pump.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons Iaedpfx Aexyvx Toh Nol The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Stainless steel knife gate valve Diameter 150 mm Made entirely of stainless steel 2 units in stock See our other listings Iodpjx Nykbofx Ah Njal VMA Wekerom

Condition: excellent (used), Automatic circular knife grinder Göckel model RB2 Iasdpfxjx Hp Rrj Ah Njl

Condition: like new (used), functionality: fully functional, 1 as-new high-performance knife grinding machine MVM KX 250 – 2100 mm (ex-demonstration unit) * 1-year warranty • Siemens touch screen PLC (control system, spare parts supply guaranteed by MVM) Iasdpfxex Nhnhe Ah Njl • Grinding wheel motor 15 kW, 20 HP, 400V, 3-phase, 50 Hz • Grinding wheel diameter: 250 mm • Magnetic rotary table, adjustable from 0 to 90 degrees • Magnetic table width: 150 mm • Magnetic table length: 2100 mm • Vernier indexer for magnetic table rotation +/- 90° • Controls for rapid or slow downfeed of the grinding wheel • Automatic feed controlled by Siemens PLC (0.001 – 0.1 mm) • Fully automatic work cycle (rough grinding, fine grinding, sparking out) • Variable carriage speed: 1 – 30 m/min • Automatic lubrication of PTFE slideways • Coolant injection at center of the grinding wheel plus 2 further nozzles on each side • External coolant tank with pump • Magnetic separator with discs for coolant cleaning • Motorized quick-change flange for fast tool changeover • Variable grinding wheel speed (adjustable to blade, machining phase [roughing, finishing, sparking out], and blade wear) • Automatic approach to workpiece (HSS) • LED lighting • Dimensions: 4.12 x 1.50 x 1.75 m • 1-year warranty

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Iaedpfx Ahjv A Hyks Njl Total power requirement 4,5 kw

Condition: used, Automatic Bäuerle knife grinding machine or surface grinding machine for planer knives, chipper knives or similar. grinding motor: 1 kW Knife length: max. approx. 800 mm Iedpexl A Tzjfx Ah Neal

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Iaodpjx Ii Hvofx Ah Nol

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder Iaedpfx Ahoi Exp Es Nel -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Iaedpfxevz Egye Ah Nol Weight 1000 kg Total power requirement 5,5 kw

Condition: used, for planing heads max. 125 x 180 x 35 mm. Iasdpfx Aslf Nddoh Njl

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Iodjwchn Ujpfx Ah Njal Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Manual planer knife sharpener Weinig Rondamat 931 for sharpening and grinding profile knives and straight planer knives in the planer head using templates. Max. tool width: about 230 mm Iaedpfxjw Au Rco Ah Njl Grinding speed: infinitely adjustable Mandrel: 30 / 35 / 40 / 50 / 60 mm

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Iodpfxov Htnis Ah Noal Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: used, * 6 pieces in a set * 300 x 18.4 x 1 mm. Iedpolf I Ebofx Ah Nsal

Condition: good (used), Technical specifications: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Iaedpfx Aewchpljh Nol Accessories: Side hydraulic bending aids

Condition: used, for planing heads max. 125 x 140 x 30 mm. Isdpfxelf I Dzj Ah Nsal

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Iaedpox Iitijfx Ah Nel Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: used, Available: 2 Price per unit: €220.00 + VAT knife: WP Z36 flight circle (ø): 125 mm Iedpfx Ajxrdgish Njal drilling: 50 mm length: 180 mm material: aluminum Labelling: MEC

Condition: used, for planing heads max. 125 x 180 x 35 mm. Iedjlf I Dwjpfx Ah Noal