Used Round Clock for sale (3,835)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei Bwjdpfx Aex Urqdebboh 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Bedpfx Asx Urpmsbbewh Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR Bwedpfxjxhddgs Abbjh (Prices may vary with significant fluctuations)

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Bwjdpfxjku A A Hs Abboh Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Condition: new, Empty weight: 1.650 kg Attachment suited for: Agricultural machines Bwodpfeyav Nmox Abboh

Condition: new, Year of construction: 2018, Attachment suited for: Agricultural machines Bwedpfx Aeyaugksbbeh

Condition: new, Attachment suited for: Agricultural machines Bsdsyaud Njpfx Abbowh

Year of construction: 2012, condition: as good as new (ex-display), Round 50 with MIG/MAG preparation consisting of: - Rotary tilting table Turn50 - three-jaw chuck 200mm with centering fixture - Attachment kit quill with manual operation - welding cable 50mm² - Attachment set circular weld 1 (cable set+initiator) - Base frame with mounting kit for torch stand and integrated magnetic stop - Torch stand Fix50/50 1000/500 F/H Stand tube 1000mm extension arm: - Tube spindle unit 500mm - - Burner fine positioning 3x50mm with Bedpfxjiby Naj Abbewh tube connection piece - Ball joint KG1 Universal torch clamp with indexing - 37/38mm for MIG/MAG automatic welding torches - Control 12 Automation control with integrated control panel - LorchNet connection cable 1m 2 x M12 Connector

Condition: used, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Bedpfox S Dxbex Abbowh Extended machine accessories

Condition: used, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Bsdpfx Aex S Dwqsbbswh Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:2 or 3 station variants possible:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: good (used), functionality: fully functional, Year of construction: 2012, Net wrap Bsdpfx Abjyalwmebowh 9000 bales Without cutters

Condition: new, Year of construction: 2026, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 Bedpfxofw Ay Ns Abbewh The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: used, Item: D-9779-Tank 350L Stainless steel round tank, diameter 1200 mm Agitator from top Lid at top, Capacity 350 L Bwjdpfx Ajgh Dmljbboh Diverse connections mount from side Flat bottom with conus to outlet, 3 legs

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Bsdpfx Ajwwt Ddobbswh Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers Bsdpjgd T R Dofx Abbjwh • Siemens NC control • Cone bending device with electronic tilting

Condition: good (used), Tränklein double corner rounding machine, machine is in good condition, available immediately Bwjdpfx Aevvi Epebbeh If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: good (used), Year of construction: 2005, Static Garment Overhead System, Round Tube Overhead Conveyor, Meiko, approx. 5,000 m static crane rails, approx. 3,600 m trolley tracks, approx. 1,200 trolleys, 3 levels, incl. 2,852 m² mezzanine floor area, total area approx. 8,556 m² - used - : Net price ex-site: only €149,500 (net) including dismantling, packing, and loading Manufacturer: Meiko (SSI Schäfer) Technical support available from, e.g., BKLS Maschinenbau GmbH & Co. KG Type: Round Tube Overhead Conveyor Year of construction: 2005 Base area: approx. 2,852 m² (L = approx. 64.7 m x W = approx. 44.1 m) Total height: approx. 7.10 m Incl. incline conveyor Incl. 2 telescopic conveyors for easy loading and unloading of hanging textiles More detailed information available upon request! Pos. 1 LEVEL 0 (+0.000) 1,293 m horizontal running rail 52 m sloped running rail 52 m derailment protection for running rail 38 pcs. swing switches 2 pcs. spring switches Etc. Pos. 2 LEVEL 1 (height +3.790 top edge of floor) 472 m horizontal running rail 30 m sloped running rail 970 m running rail between storage areas 60 m derailment protection for running rail 48 pcs. swing switches 57 pcs. ball joint switches, complete, 2-way 2 pcs. ball joint switches, complete, 3-way 17 pcs. catch switches 3 pcs. HD manual stop 273 m fixed single-sided storage rail, double-deck 3,228 m fixed double storage rail, double-deck Etc. Pos. 3 LEVEL 2 (height +6.815 m top edge of floor), 1st construction phase 366 m horizontal running rail 22 m sloped running rail 398 m running rail between storage areas 38 m derailment protection for running rail 24 pcs. swing switches 31 pcs. ball joint switches, complete, 2-way 1 pc. ball joint switch, complete, 3-way 12 pcs. catch switches 3 pcs. HD manual stop 147 m fixed single-sided storage rail, double-deck 1,344 m fixed double storage rail, double-deck 1,170 m double pipe construction, galvanised (struct.), 2 x Ø 5/4", H = 150 mm 814 m² intermediate mezzanine Etc. Pos. 4 VERTICAL CONVEYING, LEVEL 0 TO LEVEL 2 1 pc. chain conveyor M 1, total length 112 m, consisting of: 1 pc. drive incl. maintenance switch, V = 12.5 m/min 1 pc. tensioning station 112 m conveyor chain incl. carrier, pitch 830 mm 1 pc. service station, L = 0.75 m 2 pcs. separable conveyor profile, L = 1.0 m 85 m straight conveyor profile 6 pcs. horizontal curve 180°, r = 600 mm Bjdpfx Abjx R Dnaebswh 2 pcs. horizontal curve 90°, r = 600 mm 2 pcs. horizontal curve 45°, r = 600 mm 4 pcs. vertical curve UP 30°, r = 900 mm 4 pcs. vertical curve DOWN 30°, r = 900 mm 5 pcs. vertical curve UP 15°, r = 900 mm 5 pcs. vertical curve DOWN 15°, r = 900 mm 1 pc. cut-out for tensioning station 40 m derailment protection for running rail Pos. 5 TROLLEYS Approx. 1,200 double roller trolleys, type 53.083, with coding and coupling, loading capacity = 660 mm Pos. 6 TROLLEY CARS 10 pcs. empty trolley transport carts Pos. 7 CONTROL SYSTEM FOR CONVEYORS Etc. Pos. 8 2,852 m² STEEL MEZZANINE Steel mezzanine according to DIN 17100 and DIN 18800 - Column grid approx. 4,970 x 4,900 mm, L = approx. 64.7 m; W = approx. 44.1 m; H = 3.10 m - Surface treatment: sandblasted, primed, and painted Color shade according to RAL, e.g., Crenteyreiss RAL 9001 - Anchoring: Column with base plate anchored to the floor Technical specifications: Load capacity of walkable surface 100 or 250 kp/m² Running rail load 60 kp/m Storage rail load 75 kp/m Building services 15 kp/m² Inspection is expressly recommended! Condition: good to very good Available: approx. Q2 2026 Loca

Year of construction: 1991, condition: used, table load 3000 kg swivelling range 360 Grad vertical motion range 1380 mm stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm Clamping plate distance: 2800 mm Support arm rotation angle: 360° Bwsdpfx Abevuz N Djboh - Operating instructions

Condition: new, Model Name Shark 282 CCS Bedpfxjgvkbcs Abbswh

Condition: new, Model Name Shark 281 CCS Bsdjgvkchepfx Abbjwh

Condition: new, Model Name Bsdpfsl Sva Iex Abbewh SHARK 331-1 NC 5.0 SPIDER

Condition: new, Model Name Bsdegvkafspfx Abbewh Shark 332-1 SXI evo

Condition: new, Model Name Bwsdpegvquwsfx Abbsh Shark 332-1 CCS

Condition: good (used), Year of construction: 1979, Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges Bwodpfxeiqpyue Abbjh -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck Bwsdpfx Ajitv A Esbboh -Mouth size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg