Used Postforming for sale (40)

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) Hjdsnzhxqopfx Aa Eenp 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: limited functionality, IMA Postforming, year of manufacture 1999 The melting adhesive units for surface and corner gluing are not included. The machine offered is being sold as a used unit. The sale is made under exclusion of any liability for material defects. Hodpfoywfifjx Aa Eonp The machine is sold as inspected and without any warranty. The seller does not provide any guarantee for functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent behavior on the part of the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks related to dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, however, without guarantee.

Year of construction: 1988, condition: used, • Maximum working length (mm): 3100 Hodjkx Hpajpfx Aa Eenp • Maximum profile height (mm): 200

Condition: ready for operation (used), Year of construction: 2023, Edgebander manufactured in 2023. This BIESSE Akron 1440 A features a panel height range of 10-60 mm and an edge height of 14-64 mm. It supports roll edge thickness from 0.4-3 mm and strip edge thickness from 0.4-12 mm. The machine includes a chain feed speed of 12 m/min and is equipped with an NC axis package for automatic setup. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. edge banding machineBrand: BiesseType: Akron 1440 Ayear of manufacture: 2023Technical data: • Panel height: 10–60 mm • Edge height: 14–64 mm • Roll edge thickness: 0.4–3 mm • Strip edge thickness: 0.4–12 mm • Panel overhang beyond the chain: 25 mm • Panel length: 140–3200 mm • Minimum panel width (with panel length 140 mm): 85 mm • Minimum panel width (with panel length 250 mm): 50 mm • Chain feed speed: 12 m/min • Distance between panels: 450–650 mm • NC axis package for automatic machine setup • Return conveyor installation kit • Notes: • Minimum panel height 8 mm with max edge thickness 1.5 mm. • Values marked “depending on the selected working units.” Max permissible feed speed 12 m/min. • Aggregates/working units: • Anti-adhesive spraying unit ADZ02 • Pre-milling unit RT02 • Two high-frequency motors, each 1.8 kW, 12,000 rpm • Gluing unit VC-511 • Processes EVA and PUR granulated adhesives • Adhesive container capacity: 1.5 kg • Pressure zone • 1 driven pressure roller, Ø 100 mm, independently adjustable pressure • 2nd and 3rd non-driven pressure rollers, Ø 60 mm, anti-adhesive coating, opposing conical, pneumatically adjustable • End trimming unit IT-70-S • Two high-frequency motors, each 0.8 kW, 12,000 rpm Hodpfjzmglwjx Aa Eonp • Straight (0°) or inclined trimming, adjustable 0°–15° • Antistatic/cooling liquid spraying unit for end trimming • Fine milling unit RF02 • Two high-frequency motors, each 0.65 kW, 12,000 rpm • Corner rounding unit • Two high-frequency motors, each 0.65 kW, 12,000 rpm • For straight and postforming/softforming profiles on 90° and 180° corners • Edge scraping unit RB02 • Manual switching between two processing profiles • Glue joint scraping unit RC02 • Buffing unit SZ02 • Two motors, each 0.37 kW, 2,800 rpm • Hot air blower unit PH-501 • Power: 2 kW; continuously adjustable temperature control

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Hjdpfx Aajy Dr Hqe Esnp Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Hnsdpfx Asygta Aja Esp Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 10 Thin sheet loading: yes Postforming: yes

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling Hodpfszk Nwwjx Aa Ejnp - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), cutting height (max.): 115 mm, cutting width (max.): 4,200 mm, height adjustment type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, SCHEER PA 7012PK – 4200 x 4200 mm Like-new, high-performance panel dividing system with postforming unit, head cutting saws, and vacuum loading system. LIKE NEW - FROM THE MANUFACTURER - 1 year warranty For sale is a powerful and extensively equipped SCHEER PA 7012PK panel dividing system with a cutting capacity of 4200 x 4200 mm. The system has been professionally overhauled and is ideally suited for industrial furniture and interior design companies with high demands for precision, performance and automation. Technical data Cutting length: 4,200 mm Cutting height: 115 mm Saw blade overhang: 135 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Automatic cutting height adjustment Residual cuts up to 5 mm possible Hardened guides Automatic forward and backward movement of the saw unit Main and scoring saws with integrated extraction Fully automatic angle pressing device Material feed HP 5107-4200 Servo-driven material pusher Feed speed up to 25 m/min Return speed up to 50 m/min Hnsdpfx Aaeza Eaze Eop 7 retractable clamping fingers Closed Pertinax surface in the stop area Air cushion system instead of rollers Control & Software with integrated industrial PC. Highlights: SSD hard drive Linux operating system Network-enabled (LAN/WLAN) Remote maintenance via TeamViewer / Remote Desktop Graphical cutting plan display Multilingual user interface 17" flat-screen monitor in swiveling control panel Virtually unlimited cutting plan management Optimization software OPTIMIN The integrated cutting plan optimization enables the direct creation and calculation of optimized cutting plans on the machine. Bills of materials are entered and automatically converted into economical cutting layouts. Postforming unit Integrated postforming unit Material height up to 80 mm Lift table TE 5085-4200 Four-spindle lift table Can be loaded from three sides Table size: 4,200 x 2,200 mm Stack height up to 650 mm Motor-driven roller conveyors on the right and left Fully automatic alignment systems Longitudinal alignment WP 5035-4200 Automatic positioning Working area 2,000 – 4,200 mm Transverse alignment WP 5034-4200 Three alignment fingers Working area 1,200 – 2,200 mm Front tables Angle stop table HP 5094-2406 3 workpiece support tables HP 5095-2406 Pertinax supports Air cushion system LK 5162 for all front tables Head cutting saws Main head cutting saw KS 5000-4200 Fully automatic positioning Adjustment range 300 – 2,100 mm Extended travel up to 3,100 mm Power 7.5 kW Integrated top and bottom extraction Additional head cutting saw Manually adjustable Positioning 0 – 50 mm from the stop edge Power 7.5 kW Vacuum loading system TE 5088-4200 Additional pusher with integrated short-stroke vacuum loading system. The panels are automatically transferred from the lift table to the pre-stacking table and fed into the processing process. This enables short cycle times and a high degree of automation. Conclusion An extremely rare and fully equipped industrial panel dividing system with extensive automation, postforming equipment, double head cutting system and vacuum loading. Ideal for the furniture industry, shop fitting, interior design, as well as larger carpentry and joinery businesses. Machine available immediately – 1 year warranty.

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 18.5" touchscreen control panel, Power-PC color display Hnodpfszdzlmsx Aa Ejp Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed fence, 1350 mm MOT Edge magazine, fully automatic for coil and strip material, MOT Gluing station GLU-JET cartridges – hot melt and PU adhesive, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Press unit 1913 mot., motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of 0-10° bevel on the miter saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius trimming Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end faces, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as anti-static agent at the press unit Infeed area, electronically controlled release agent spray device Press unit, electronically controlled anti-static spray device Outfeed area, electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg Hedpfxjw Dfnhj Aa Esnp

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Hedpfx Asyu Uk Soa Eonp Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 4,250 mm, Panel saw manufactured in 2007. This HOLZHER 6310 CUT 110 features a cutting length of 4250 mm and a cutting width of 2700 mm. It includes a Cut Control system with touchscreen operation, a saw carriage with main and scoring saw, and a grooving unit with adjustable depth settings. If you are looking to get high-quality cutting capabilities, consider the HOLZHER 6310 CUT 110 panel saw we have for sale. Contact us for further details. • Condition note: not rebuilt – without warranty • Cutting width: 2700 mm (original 5250 mm, shortened by 2550 mm to 2700 mm) • Screen on the right • Control: Cut Control system with touchscreen operation • Angle clamping device on the right • Saw carriage: main/scoring saw controlled • Motor power: 18.5 kW (main) / 2.2 kW (scoring) • Scoring saw: manual adjustment in width and height • Grooving unit: 2 groove height settings (groove depth adjustable 2–12 mm, up to max. 9–19 mm) • Label printer: TLP2742 • Cutting-out unit • Additional blow-off unit traveling with the saw carriage • 3 additional support tables, 2400 mm, with travel mechanism • Control cabinet on machine side, incl. speed monitoring with safety shut-off • Postforming unit, incl. scoring unit • Automatic central lubrication • Enclosed pressure beam • Film cutting device Additional equipment • Optional at extra charge: Dust extraction system (€4,000.00) • Brand: AL-KO • Model: POWER UNIT 300P • Year of manufacture: 2011 • Airflow: 5089 m³/h • Vacuum: 2050 pA • Motor power: 7.5 kW • Suction inlet: 300 mm Hnsdpfxsy N Scpo Aa Eop • Collection: 3 tanks, 250 l each • Integrated automatic shut-off

Condition: used, Holz Her Auriga 1308 XL Compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC color touchscreen monitor iTronic adaptive pressure and glue dosing control with cleaning routine Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET for cartridges + PU bonding, with sensor-controlled nozzle Workpiece height 8–60 mm High-gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic adjustment for 0–10° mitre cut Multifunctional milling unit 1827 MOT4 for flush trimming 8 mm, radius milling, and bevel milling 15° via NC axes Contour milling unit – corner rounding up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for bevels and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Hnedoy Icmpopfx Aa Esp Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tooling included First delivery in 2020 Machine is in TOP CONDITION from lease return – small business Available immediately from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit Hodpfox D D R Sjx Aa Esnp • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, TOP AND BOTTOM CALIBRATING LINE DMC MOD. UNISAND 2000–1350 – CE RULES Bottom machine: - Vacuum lifting device for conveyor belt - N. 2 bottom sanding belts - Steel roller - Rubber roller - Brush Hnjdpfx Aoywgqksa Ejp - On/off devices - Blowers - Shoe pressers - Working width 1350 mm - Year 2000 - Complete with manual and CE declaration Top machine: - N. 3 top sanding belts - Steel roller - Rubber roller - Pad - Brush - On/off devices - Blowers - Shoe pressers - Vacuum device - Year 2000

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES Hodjywfkvopfx Aa Eonp - 1. Horizontal bottom 11 kw - 2. Vertical right 7.5 kw - 3. Vertical left 7.5 kw - 4. Horizontal top 11 kw - 5. Horizontal top 7.5 kw - 6. Horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Hjdpfxox Nc Ayo Aa Esnp Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, SECOND-HAND VERTICAL SANDER Hodpjrnnqdefx Aa Eenp

Condition: used, Year of construction: 1996, SECOND-HAND CHAIR LEVELLING MACHINE COMEC MOD. EGS - Volt. 380/50 - S/N 960416 - CE rules year 1996 Hnedpjwrb R Iefx Aa Esp

Condition: used, SECOND-HAND SANDING MACHINE FOR TURNED PIECES GENINI MOD. LAR 90 - Max. working lenght 900mm - With loader Hjdpfx Aaowrn Uyo Eenp

Condition: used, Year of construction: 2017, machine/vehicle number: 17002, SECOND-HAND ORBITAL SANDERS CNT MOD. LOR 150 - Year 2017 - S/N 17002 Hjdpewvimfsfx Aa Esnp

Year of construction: 1995, condition: used, SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK -with loader -working length 1200 mm Hnsdpohy Tvmsfx Aa Eep

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 220.01.016.22, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Hedpfexwt Nqex Aa Esnp Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: used, Year of construction: 2012, Rotary sander with rollers for postformed workpieces with a vacuum system to hold the workpiece on the feed belt Machine dimensions: 1715 x 3235 x 2000 mm Working width: 1400 mm Working height: 100 mm Belt feed speed: 2-13 m/min Abrasive shaft rotation speed: 300-1200 rpm Support shaft rotation speed: 3-16 rpm Abrasive shaft length: 540 mm No. 8 (4+4) rotating abrasive shafts Abrasive tool diameter: 300 mm No. 336 total abrasive discs Main motor power: 5.5 kW Rotation motor power: 1.5 kW Height adjustment motor power: 0.3 kW Belt feed motor power: 0.3 kW 2.2 Vacuum fan motor power: 2.2 kW TECHNICAL DETAILS TO BE VERIFIED Hedjw E H R Tjpfx Aa Esnp

Condition: used, Year of construction: 1996, machine/vehicle number: 518, SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - Working length mm. 1200 Hjdpfjrnnmpsx Aa Eenp - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp cad.) - With loader CSF2 - Nc ISAC - Perimetral net - Volt. 380/50 - Year 1996