Used Rotary Table Grinding for sale (21,497)

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Njdpfxsr I E Ito Ad Selc Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: used, Univ. swiveling-tilting rotary table Mounting table for Univ. tool grinding machine Table size: 630 x 250 mm Slot width: 14 mm Rotatable and tiltable: +/- 30° Nedjgp T D Nspfx Ad Sslc Swiveling: +/- 45° - 4x T-slot Weight: approx. 120 kg

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t table height / mm Nlsdpfx Asylz D Hjd Sjc

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm Nljdpfsgxqvzex Ad Ssc plate height 1400 mm total power requirement 11 kW

Year of construction: 2006, condition: good (used), machine/vehicle number: 1610, Offer 22163 Nledpfxsnqzp Uj Ad Sec Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: D206311, Offer 23344 Technical data: - Load capacity 20 kg - Face plate diameter 320 mm - Face plate can be swiveled left + right with grid adjustment - Faceplate speed electr. infinitely variable - Faceplate with right + left rotation - Hollow shaft with passage approx. 25 mm - Welding current transmission 300 A - Drive 400 V - Table height in horizontal position 820 mm Nedpfx Adjq Ev Sto Solc - E. foot switch - Space requirement with table approx. W 600 x H 820 x D 500 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 181192, Offer 24037 Hydraulic welding rotary and tilting table – three axes - welding manipulator Nedpfev Hcabsx Ad Sslc Technical data: - max. load capacity 150 kg - faceplate diameter 800 - min. table height in horizontal position approx. 600 mm - max. table height in horizontal position approx. 1100 mm - faceplate can be swiveled or tilted hydraulically - faceplate rotates clockwise and counterclockwise - rotary movement can be controlled electrically hydraulically - welding current transmission approx. 500 A - drive 400 V - connected load approx. 0.75 kW - space requirement approx. W 1700 x H 1450 x D 1000 mm - weight approx. 900 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1608, Offer 17231 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - Rotation electrically infinitely variable 0 - 2.5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation + - right - left rotation Njdpfxonqzmcj Ad Sslc - ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - weight approx. 100 kg - mounted on trolley approx. W 700 x H 150 x D 700 mm

Year of construction: 2006, condition: good (used), machine/vehicle number: 1607, Offer 22161 Nljdpfsnqzmnox Ad Ssc Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Nsdjhfwnqopfx Ad Sjlc Technical data: - Max. load capacity 10000 kg - Turntable dimensions 1400 x 1400 mm - Turntable hydraulically swivelable 0 - 90 / 135 ° - Rotation speed continuously adjustable 0.05 - 1.2 rpm - Clockwise and counterclockwise rotation controllable - Welding current transmission approx. 500 A - Power supply 400 V - Table height in horizontal position approx. 2500 mm - Electric remote control - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - Maximum load capacity: 3000 kg - Turntable diameter: 1600 x 1600 mm - Turntable extension tubes - Turntable, motor-driven, swiveling: 0 - 90 / 135° - Steplessly adjustable rotary motion: 0.01 - 4 rpm - Controllable clockwise and counterclockwise rotation - Welding current transfer: approx. 500 A - Power supply: 400 V - Table height in horizontal position without base: approx. 1200 mm - Table height in horizontal position with base: approx. 2200 mm - Space requirement: approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight: approx. 2700 kg Njdpfx Asbp Ddzod Sslc

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm Nedoq Ev R Sopfx Ad Solc - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed - E- foot switch Nodpjur Icusfx Ad Sslc - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2005, Offer 25238 Technical Data: - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm Nlodjwzigcopfx Ad Sjc

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. Nljdpoxabm Nefx Ad Sec - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control Nsdpfx Ajxabl Sjd Sjlc - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch Njdpjxaatnefx Ad Solc

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Nedpjxaafqofx Ad Selc Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table Nodpfx Adeykzhvj Sjlc -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines from Netstal, type SynErgy 2000-230/110. The machines were in production until recently. The company from which these machines originate places great emphasis on maintenance and servicing, which is why the machines are in very good condition. 2-cavity function Rotating platen Designation: Netsal SynErgy 2000 Year of manufacture: 2012 Operating hours: 28,828 Weight: 13,300 kg Clamping force in kN: 2000 Injection unit: 230 Machine drive: 45 kW drive power Length: 6901 mm Width: 2075 mm Height: 2240 mm Cylinder size AG1: 20mm / 32mm - Available Cylinder size AG2: 25mm / 32mm - Available ____ Handling: Wittmann, can be purchased separately Serial number: W833PRO – 0284 Operating hours approx.: 13,000 h Year of manufacture: 2016 Conveyor belt (lower) Width: 400 mm Length: 2300 mm The systems can be purchased complete or as individual parts. Machines have already been disassembled. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Nedskv Uq Iopfx Ad Selc For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2014, For sale are two identical injection molding machines from Netstal, type SynErgy 2000-230/110. These machines were in production until recently. Nljdokwb Diepfx Ad Sec The company from which these machines originate places great emphasis on maintenance and upkeep, which is why the machines are in very good condition. Features: * 2-cavity mold * Rotary table Description: Netsal SynErgy 2000 Clamping force in kN: 2000 Machine drive power in kW: 45 Year of manufacture: 2014 Operating hours: 20209 Weight: 13300 kg Length: 6901 mm Width: 2075 mm Height: 2240 mm plus 800 mm Flow Box Cylinder size AG1: 20 mm Cylinder size AG2: 16 mm _____ Description: Flow Box Type: LMP 105 Manufacturer: Max Petek Serial number: S 140743 Year of manufacture: 2014 _____ Can also be purchased separately: Robot: Krauss – Maffei MH 50 Description: 6-axis: Yaskawa Type: DX 100 Operating hours approx.: 8900 Year of manufacture: 2014 The systems can be purchased as a complete set or individually. Prices do not include VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Year of construction: 2026, condition: new, Stainless Steel Rotary Table – For Food Packaging Lines Manufacturer: In-house production Machine type: Rotary table / accumulation table Application: Food packaging and processing lines Description This stainless steel rotary table is designed for product accumulation and handling at the end or beginning of food packaging lines. The table allows operators to easily collect, sort, or feed products during the packaging process. The rotary table is built with hygienic stainless steel construction and is suitable for use in food production environments. It can be used as a collection table after packaging machines or as a feeding table before labeling, weighing, or packing systems. Our rotary tables are manufactured in-house and can be supplied in different diameters depending on customer requirements. Technical Specifications Nodsyt Hdzspfx Ad Solc - Machine type: Rotary accumulation table - Construction: Stainless steel (food grade) - Drive: Electric motor with gearbox - Speed: One rotation speed - Power supply: 230 / 400 V – 50 Hz (depending on configuration) - Design: Hygienic construction suitable for food environments Key Features - Heavy-duty stainless steel construction - Smooth product accumulation and handling - Suitable for food production and packaging lines Applications - Food packaging lines - Tray sealing lines - Checkweigher and labeling lines - Product collection after packaging machines Condition New – manufactured in-house.

Condition: good (used), – Capacity: unknown – Infinitely variable speed – Height adjustable – Tiltable Nlodpfjw Ttxlex Ad Soc – With three-jaw chuck – Foot pedal – 230V

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 Nedsxcbpiopfx Ad Selc - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Nlsdpexf Uudefx Ad Sjc Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition