Used Rotary Table Grinding Machine for sale (68,100)

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Lhodpfx Ahsynbi Ievod Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Lodpsxc Nyvofx Ahvjhd Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. Lhedpfx Ahjywcl Reved KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), Year of construction: 2011, center height: 500 mm, grinding wheel diameter: 200 mm, OKAMOTO 250 NCB CNC cylindrical grinder. Exact technical description can be seen in the pictures. Year of manufacture: 2011. Ledpfxeywcb Ss Ahvshd

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: Lodpfeq I N H Nox Ahvshd 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. Lodpfxsq Nf Uwe Ahvjhd 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: ready for operation (used), controller manufacturer: Heidenhain 355, empty load weight: 11,500 kg, total length: 7,500 mm, total width: 3,500 mm, total height: 3,800 mm, Butler Elgamill X: 3000 - Y: 1670 - Z: 1050 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1050 mm Travel Z-axe: 1670 mm Dimensions clamping space- table: 3100 x 1200 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 16 > 2000 rpm Ljdpfx Aoyv Sghohvshd

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Accessories / equipment: - Vibration-free running smoothness Lhodpfxoyv N Age Ahvjd - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° Lhodeyv Nxzepfx Ahvod weight of the machine ca. 675 kg

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: Ledpfeyv Nb Nex Ahvjhd - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° Lhedpfeyv I Riox Ahved dimensions 2100x920x1100 mm weight of the machine ca. 930 kg

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sek. total power requirement 3 kW weight of the machine ca. 95 kg turning speeds 2800 U/min Ljdjyv Nw Rjpfx Ahvshd Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, neu ca. 2 Wochen ab Auftragse Italien Lhjdjyv Iqvopfx Ahved 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, band speed 33 m/s grinding band dimension 75 x 2000 mm total power requirement 3 kW weight of the machine ca. 75 kg turning speeds 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) Lhsdpfx Aeyv Nvgohvsd

Condition: not inspected (used), Year of construction: 1993, machine/vehicle number: 101472, ● Terms of delivery: Free loaded onto truck ● Location: 42477 Radevormwald ● Availability: By arrangement – Collection of the goods is scheduled for 06/05/2026. Unfortunately, collection outside this period cannot be considered. ● Payment terms: Advance payment by bank transfer Lsdpsyv Hduefx Ahvehd ● Internal no.: DÄ27 ● Inspection under power: Yes Technical data: ● Magnetic chuck approx.: 500 x 250 mm ● Grinding length approx.: 600 mm ● Grinding width approx.: 250 mm ● Grinding height approx.: 500 mm Scope of delivery: ● Various grinding wheels as per pictures Dimensions & weights: ● Installation dimensions L x W x H approx.: 2200 x 1700 x 2000 mm ● Weight approx.: 1500 kg Info: There is a small chipped area on the lower handwheel; however, this does not affect functionality. If you have any questions or would like to arrange a viewing, please feel free to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale is strictly to business customers only❗

Condition: ready for operation (used), Table diameter: 250 mm Lhodpeyv D Ahofx Ahved Table height: 105 mm

Year of construction: 1980, condition: good (used), We offer you one used rotary table 3200x2400mm The main characteristics are: - Size: 3200x2400mm Ledpfoyv Albjx Ahvjhd - Longitudinal travel: 5000mm - Max. loading capacity: 40 tons - Equipped with 2 pinions for rotation - Weight approx. 36 tons

Condition: excellent (used), Support belt grinder Lhodpfsyv A Dqex Ahvjd Brand: Lehnert Contact wheel width: 50 mm Contact wheel diameter: 250 mm Belt size: 2000 x 50 mm Motor power: 1.5 kW 380 Volt 2830 rpm

Condition: used, Technical details: grinding length: 1000 mm grinding width: 500 mm workpiece height: 500 mm table surface area: 1000 x 450 mm magnetic plate size: 1005 x 500 x 84 mm table speed: k.A. m/min table adjustment: längs: 1100 mm table adjustment: quer: 500 mm grinding spindle speed: 1420 - 2840 U/min grinding head vertical adjustable: 700 mm dimensions of grinding wheel: Ø 280 x 50 mm weight of the machine ca.: 2,7 t Lsdpfx Aevc Aw Ejhvehd dimension machine xH: 3,1 x 2,0 x 2,4 m dimension coolant device LxWxH: 3,0 x 1,1 x 0,85 m dimensions of hydaulic: 750 x 600 x 850 mm dimension control panel: 0,65 x 0,85 x 1,3 m Equipment: Dressing device Holder for dial gauge Coolant filter system Hydraulic unit Manual control unit *

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Lhedpsr D Nmkofx Ahved Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Fanuc series 35i CNC Control Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Lsdpfx Aoyvupxohvshd Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, HENNINGER ZS 160 centre grinding machine - Centre distance: approx. 800 mm Note: The item must be collected on a binding basis between 12.05. and 22.05.2026, on a date yet to be coordinated. Lhjdjyvtmispfx Ahved FCA D-74821 Mosbach – loaded onto truck

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Ljdpfx Ahoxnlavsvohd

Condition: good (used), Year of construction: 2004, operating hours: 35,048 h, functionality: fully functional, machine/vehicle number: 025, center height: 175 mm, center width: 1,000 mm, total width: 2,000 mm, total length: 5,000 mm, total height: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GE FANUC, controller model: SERIES 21i-TB, STUDER S 33 CNC cylindrical grinding machine - Longitudinal slide max. travel: 1150 mm - Speed: 0.001 - 10,000 mm/min - Resolution: 0.0001 mm - Cross slide max. travel: 285 mm - Speed: 0.001 - 5,000 mm/min - Resolution: 0.0001 mm - Workpiece spindle head speed range with rotating center: 1 - 1,500 rpm, with fixed center max.: 1,000 rpm - Spindle taper: MK 5 - Run-out accuracy: 0.0004 mm - Including internal grinding device and coolant unit Lhjdpfsyvrxqex Ahvod Note: The item must be collected definitively between 12.05. and 22.05.2026 on a date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m Lhsdpedgk H Aefx Ahved