Used Rotary Board Cutter for sale (13,596)

Year of construction: 2001, condition: good (used), 1 x CDH Cutter 65Litre Year: 2001 Podpfx Agjxrcxdewsrc Located Melksham, Wiltshire

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Predpfx Aoxabm Njgwjc Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: reconditioned (used), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - HEIDENHAIN 3-axis active digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm Pjdpexpwfgjfx Agwerc - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry measurement videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital readout overhauled - New wiper set installed - LEDs in the Active display replaced - Oil changed - Vertical milling head fitted with new bearings - Oil sight glass replaced Net price, ex stock, free loaded

Condition: excellent (used), functionality: fully functional, Machine type: Universal rotary/tilting/swiveling table with dividing head Manufacturer: Hermle, Deckel, Mikron Condition: very good Type of offer: used machine component Technical data: Note: Size: 670 x 395 mm Podpfjxpwbuex Agwsrc Mounting size: 480 x 220 mm #### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE #### The component is in very good and immediately ready-for-use condition and can be inspected at our facility. We would be pleased if our offer is of interest to you. Subject to errors, changes, and intermediate sale.

Condition: excellent (used), functionality: fully functional, KUKA AG control board for KRC4, CCU, 5 383 01 4 287 04, PCB Assy Cib Bd W Pmb Sr Model: 538301428704 Type: PCBAssyCibBdWPmbSr Condition: Used Prsdpfxoxpvavj Agwjc

Condition: new, Fanuc A20B-8100C - A20B-8100 /C PCB-PMC C Languarde Board, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Podpfji D U Hpex Agwsrc

Condition: ready for operation (used), Year of construction: 2015, operating hours: 558 h, functionality: fully functional, Plasma Cutter MGM MS300 + Hypertherm HPR130XD Fully operational | Excellent condition For sale: a powerful and reliable MGM MS300 CNC plasma cutter equipped with the Hypertherm HyPerformance HPR130XD plasma source. The machine is in perfect working order, well maintained, and immediately ready for production use. ✅ Specifications: Model: MGM MS300 Plasma source: Hypertherm HPR130XD Cutting range: 1.5m x 3m PowerPierce™ Technology – excellent piercing capability HyPerformance Automatic Gas Consoles (O₂ / N₂) Psdpfxoxq Ta Ae Agworc Control: Industrial touchscreen controller Automatic height control (IHT) Includes compressor and control cabinet Voltage: 3-phase 400V Year of plasma source: 2015 Operating hours: Low usage, everything operates properly Purchase invoice available – can be shown upon request. 🧰 Condition: The machine is in excellent technical and optical condition with high precision. Price includes transport (within Belgium) VAT excluded

Condition: excellent (used), Year of construction: 1999, Profile grinding machine Döbeli FSM 150, built in 1999 Pjdpfewarqbex Agwerc CNC profile grinder Control: Fanuc 18M Projection: Field of view: 300 x 200 mm Magnification: 10x, 20x, 50x Illumination: 12 V, 100 W Coolant unit tank capacity: 80 L Grinding head: rotation ±30°, inclination -15° Grinding stroke: Length: 78 mm Speed: 0-280 strokes/min Spindle motor: 1 HP Spindle speed: 4,000 rpm Grinding spindle wheel diameter: 150 mm Travel range: Profile width, CNC-axis X: 120 mm Profile depth, CNC-axis Y: 50 mm Linear axis :0.0001 mm Working table: Height adjustment: 80 mm Travel in workpiece height: 150 mm Max workpiece diameter: 200 mm.

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1650G. The unit has been tested for functionality! Comes with an 8-meter torch package. 380 Volt. 30-100 Amp power output. Quality cut up to approx. 35 mm. Severance cut up to approx. 45 mm. Includes several spare nozzles (see photo). Torch and ground cable have been repaired with insulation tape in some places (see photo). Predjxq Rbdepfx Agwsc

Condition: new, power: 270 kW (367.10 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day cab * Mechanical cab suspension * Passenger seat: "Cinema" type with fabric upholstery * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Goodyear tires * Emission standard Euro 6 * Automated transmission, TraXon, 12-speed * Standard component arrangement * Fuel tank left side * PACCAR Connect * Warranty Plus – Driveline – 3 years – 500,000 km Options * LED headlamps, cornering and fog lights * Windscreen with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for day cab * Mirror housings black * Cab color: roof spoiler * Headlamp surround color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver’s seat: Luxury Air * Driver’s seat armrest * Dashboard table * Cooler or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roof hatch with electric control * ECAS remote control with extended functions * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Wireless charging device * Reverse warning system * Front axle: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * MX-11 engine, 270 kW/367 hp, cab emblem: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio: 2.47 * Mechanical differential lock * MX engine brake * Parking brake assistant * Wheelbase: 5.10 m / rear overhang: 2.75 m * Longitudinal frame members 260/7.0 mm, continuous inner reinforcement * Approved for operation with drawbar, type plate, up to max. GCW * Crossmember D137 + Rockinger coupling D130 * Pneumatic trailer connection, rotating coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift application Predsr Sn Nnepfx Agwec Body: ZIKUN Swing-Board I body Through-loading length: 6,650 mm Load length: 6,800 mm Clear portal: 2,480 mm Internal load width: 2,480 mm External width: 2,550 mm Through-loading height (internal): 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Substructure: durable lightweight construction from pressed steel sheets Bulkhead: from special vehicle construction-grade plastic panels, closed up to the roof, with a central post, flatly installed Side walls: ZIKUN folding swing system Roof: solid roof consisting of steel spar with permanently bonded aluminium sheets. Powder coated in RAL 9010 pure white Bumper protection: welded steel bump strip on both sides PVC mudguards on rear axle 1 set mud flaps for same Holder for wheel chock + 2 chocks Red position lights above tail lift Contour markings: side in white, rear in red Anti-spray mats in rear mudguards Paintwork: Entire body sandblasted, primed, and painted in single color or powder coated. Substructure and body: DAF W9815WHTE Integrated load securing with CRS system (4-row) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic pipes (CRS-System Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL) Sliding step on each side, 2 sliding entry steps in folding wall base left and right, approx. 600 mm long Pallet impact protection, left and right Interior lighting as LED spotlight mounted at the rear upper section, with connection to cab switch Additional interior lighting

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Prodpfexphn Eex Agwec Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: ready for operation (used), Bosch 1070068008-102 Servo i Module Circuit Board, SN:001453948, used, minor signs of wear, 100% functional, scope of delivery as per photos Psdpfx Agoi D T S Iowsrc

Condition: ready for operation (used), BELANGRIJKSTE KENMERKEN: Tafelafmetingen: 3000 x 3500 mm Omgeschreven cirkel: 4300 mm Toelaatbare belasting (gelijkmatig verdeeld): 50 ton op 3000 x 3500 mm Totale tafelhoogte zonder cilinder: 1.250 m Aantal T-gleuven, breedte 36 H7: 13 T-sleufafstand: 250 mm Lengteverplaatsing: 2700 mm Longitudinale voedingen / bed: • positionering: 2 mm/min • werkend: 1 tot 3000 mm/min • snel: 3000 mm/min Circulaire feeds: • werkend: 0,0006 tot 0,6 tpm • snel (50-tons belasting): 0,6 tpm Predpfxoxpggyo Agwsc Nominaal koppel van longitudinale motor/bed: 9,4 mkg Nominaal koppel van cirkelmotor/tafel: 22 mkg Totaal geïnstalleerd vermogen: 50 kVA Tafelgewicht (zonder elektrische apparatuur): 31.000 kg

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Pjdpfx Agevfdatewjrc Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: ready for operation (used), From business liquidation: Hypertherm Powermax 1000G Device has been function tested! with 10-meter torch package on transport cart 380 Volt 20–60 ampere power output Quality cut up to approx. 22 mm Prsdsxq N Trspfx Agwjc Severance cut up to approx. 30 mm + several spare nozzles (see photo)

Condition: used, 1 Pair of Transport Rollers, Platform Trolleys, Transport Carts GORR Load capacity per roller: 1,000 kg Platform size per roller: 1050 x 255 mm Platform (support plate) thickness: 4 mm Overall height: 145 mm Roller diameter: 100 mm Roller width: 37 mm Load capacity per swivel castor: 300 kg - Each roller equipped with 4 swivel castors with white polyamide wheels, bolted to the support plate - Each roller is fitted with two castors with brakes - Steel support plate with reinforced edge serves as the platform surface Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per roller: 17 kg Net weight for both rollers: 34 kg Very good condition Price is per pair = 2 heavy-duty transport skates Scope of delivery: You will receive 2 of these universally and multi-purpose heavy-duty rollers. Currently, 50 pairs in stock. Prjdpexcixlefx Agwec Both rollers together are fitted with 8 castors and can carry up to 2 tonnes in total. Our customers use them to transport squared timber, boards, planks, and sawn timber. Other users move beams, girders, and heavy pipes within the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machine skates, material dollies, or machinery transport units.

Condition: new, maximum load weight: 12,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,670 mm, loading space width: 2,490 mm, loading space height: 2,200 mm, Equipment: ABS, ZIKUN - Central Axle Trailer Swing-Board | Low-coupled Technical Data: Type: AZ2-B1B1-LBW (low-coupled) Permissible Gross Weight: 18,000 kg Trailer Weight: approx. 5,800 kg Through-loading Length: 7,520 mm Load Length: 7,670 mm + 30 mm seal tail lift = 7,700 mm Through-loading Width: 2,490 mm Through-loading Height: 2,200 mm Overall Height: approx. 3,663 mm Approx. 344 mm (loaded) ground clearance at the bottom with the drop-side panel open Axles: 2 ECO/low-maintenance steerable axles with disc brakes, each with a 9,000 kg axle load (manufacturer BPW or equivalent) Brake System: Two-line EBS air brake system according to EU directives, with ALB adjustment and parking brake as spring-loaded actuator, automatic slack adjusters. Duomatic brake connection mounted lower right. Suspension: Air suspension with raise and lower function Chassis: Robust welded construction, formed from high-strength fine grain steel plates and welded torsion-free. Longitudinal and transverse beams form a single plane with the main frame, providing high floor load resistance due to short support distances. Support: 3 crank supports each at front and rear, left and right (central crank for raising and lowering on the right) Tyres: 4 x 385/65 R22.5 (manufacturer of our choice) on steel rims 1.7 Drawbar: Central tube (low-coupled), hot-dip galvanized with 50 mm DIN towing eye, non-adjustable height, rigid design. Coupling height matched to your truck. Electrics: In accordance with German Road Traffic Licensing Regulations (StVZO), protected installation, 5-chamber taillights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 2 additional position lamps on underrun protection. Marker lights mounted on right and left rear uprights. Floor: Made of 24 mm thick vehicle floor panels, film-coated underneath to prevent moisture ingress, upper surface with anti-slip phenolic resin finish, flush-laid and sealed all around. Front Wall: Made from special vehicle-grade plastic panels, closed up to the roof, laid flat with one center reinforcement. Side Walls: ZIKUN drop and swing mechanism. Continuous drop-side, horizontally split. Lower side can be folded down, which mechanically swings the upper side onto the roof. The lever mechanism, supported by spring tension, is mounted on the front wall, ensuring that no mechanical parts protrude into the loading area or corner stanchions. Load is transferred via a torsion tube in the roof, ensuring the drop-sides move smoothly and evenly in all positions. Important: When open, the lower drop-side stands vertically at the vehicle. Easy, flush entry at the front wall—no interfering stanchions. Upper drop-side in 25 mm special aluminum composite panels. Central locking left and right mounted. Roof: Fixed roof consisting of steel bows with permanently bonded aluminum sheets, externally powder-coated in white RAL9010. Bumper/Impact Protection: Welded steel rub rail on both sides as forklift collision protection. Accessories: --Additional camera on the trailer --PVC quarter mudguards on the axles --1 set of mud flaps for the mudguards Psdpfx Aexquyqsgwsrc --2 wheel chocks with holders --2 red position lamps above the rear portal, right and left --Fixed side underride protection --Conspicuity markings according to ECE R48, white on sides, red at rear --Anti-spray mats in the mudguards

Condition: new, Adept Technology 10337-15200 Servo Amplifier Control Robot Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Prjdpfx Agji D Tt Eewjc

Condition: reconditioned (used), Universal tool milling machine Manufacturer: Harich (DECKEL) Model: A (FP 1) Refurbished with CE certification Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored protective cover on the vertical milling head - Chuck guard with electrical interlock Prsdsdvdc Iepfx Agwsc - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity

Condition: ready for operation (used), Brother B521104-2 Board from Brother TC-321 , used, good condition, 100% functional Prjdpfxoi D Uk Ho Agwsc

Condition: ready for operation (used), Mitsubishi MB974A Operation Board SN:9404007, used, normal signs of use, 100% functional, scope of delivery as per photos Pjdji Eb Npopfx Agwerc

Condition: new, Kontron CP603 PC-Board SN:248072028, unused, 100% functional, scope of delivery as per photos Prsdpfx Aei Ebwpogwec

Condition: ready for operation (used), Brother B521169-3 Circuit Board from Brother TC-321, serial no. according to photo, used, good condition, 100% functional Pedpji D Ulkofx Agwerc

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pjdsi D U D Repfx Agworc

Condition: ready for operation (used), Janich&Klass AMT CPU Board 486DX Rev. 1.1 ,used, good condition, 100% working, scope of supply according to photos Pedpfei Ebuiex Agwsrc