Used Rollforming Line for sale (16,096)

Condition: used, machine/vehicle number: 006107, Position 1: Panel Feeding and Loading RBO-WINNER C Position 2: Panel Turning Device RBO-WINNER C Position 3: Panel Turning Device RBO-WINNER C Position 4: Panel Stacking and Offloading RBO-WINNER C Dcodjwuch Tspfx Ab Ter

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Dcsdouqfa Iopfx Ab Ter Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Vertical straight line bevelling machine BOTTERO Vision 907P Year of production: 2009 7 spindles Bevel height up to 55 mm Minimum glass size: 40 x 40 mm Water tank with pump included More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested Very little used Only 12600 working meters Dodpjx Ecx Rjfx Ab Tscr See video As is Available immediately

Year of construction: 2016, condition: good (used), For sale: Available from December 15. Complete Niverplast packaging line Year of manufacture: 2016 1. Manual feeder Niverplast 2. Depanner for baguettes by AUXPAMA 3. Metal detector 4. Rejector Djdjx Ari Hjpfx Ab Tocr 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet wrapping machine 11. Niverplast conveyor belts If you have any questions or remarks, please do not hesitate to contact us. On-site inspection is possible. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2021, 4-SIDE EDGE BANDING LINE Dcedsx Aqbhopfx Ab Tsr Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: O12044a) Infeed table "HOMAG" Mod. TBL 100/25/12 with motorized rollers O12044b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) O12044d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Condition: refurbished (used), functionality: fully functional, Prinz PC 120 batten cutting line Maximum input-output length: 12,000 mm The machine is operational and fully refurbished. Test runs during production are possible upon request. Dcedpex Ea Tfefx Ab Tor Computer-controlled cutting length.

Condition: used, machine/vehicle number: 005449, undefinedPosition 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Dcodpfx Abewucl Ej Tor Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. spindles: 4 + 2 working width: 230 mm working height: 120 mm Dcodsx An R Tspfx Ab Tjr spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, Slabs finishing line composed by loading, trimming, back calibration, front calibration, 2 Xolar polishing machines, selection, unloading. Including supply of new transverse and longitudinal trimming machine. Dcodpox An Iljfx Ab Tjr

Condition: good (used), Year of construction: 2000, operating hours: 999 h, functionality: fully functional, machine/vehicle number: 55161, Used sheet and strip feeder with straightening unit Dcodpfxjx Anfws Ab Tsr Manufacturer: KOHLER Type: TRE 24.180/21-2000 Year of manufacture: 2000 Version: With enclosure

Condition: used, material width 300 mm Dcsdpfx Ajcdrmmeb Ter coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: used, Year of construction: 2023, functionality: fully functional, Technical Details: Produces all shapes of Reinforcement steel Profiles Thickness 0.50-3 mm Bandwith max- 200 mm Production Speed: max. 15-20 mt/minute Width min- 22 mm max- 60 mm Depth min- 5 mm max- 60 mm Square Shape Max: 50 mm x 50 mm Square Shape Min: 20 mm x 20 mm Loading capacity of decoiler is max. 1000 kg. Decoiler: • Decoiler is manual system with brake lining. • Bandwidth capacity 300 mm. • Max. Coil inside diameter 550 mm. • Max coil outside diameter 1500 mm. • Tightening roll hub by mechanical ROLLFORM MACHINE: The machine has 14 stations to bend sheet step by step. • Shafts and pulleys manufactured from high-quality materials (4140) according to the techniques and reach hardness of 50-55 HRC. • Shaft diameter: 52 mm. / Bearing brand: SKF • The drive gears in each pulley of the stations are made of blister steel (8620) and reach hardness of 50-55. • The reductor is used in a drive system. The main body consists of gearbox and two blocks. Spacers on the rollers can be changed manually according to the dimensions of the profiles. • There is calibrating machine that comes after the roll forming machine to get the required flatness, linearity and twist. • Reducer and helical gears will be used in drive system. • There will be 18,5 kW engine with reducer in the form unit. Dcsdpjxm Rq Refx Ab Ter • Motor brand: GAMAK / Reducer brand: YILMAZ / ÖZTEKFEN / POLAT You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Cutting is done with Flying Circular Saw. • The disc will be moved from down to up. • Length tolerance will be maximum +- 5 mm. • Saw motor will be 5,5 kW. SECOND CUTTING EQUIPMENT: You can cut the profiles of any length you need by only entering the parameters to the control panel. • Production is unstoppable even during cutting. • Only U profiles can be cut with the hydraulic guillotine. • Cutting is done with Hydraulic Guillotine. • Length tolerance will be maximum +-5 mm • The cutting mold material will be 2379 steel. • Hydraulic unit tank: 40 Liter. • Hydraulic unit motor: 3 kW • Hydraulic motor brand: GAMAK / ELK Hydraulic parts brand: TEK HİDROLİK STACKING TABLE: Stacking table will be with pneumatic discharge system and conveyor. • There will be 1 kW engine on the run-out table. CONTROL SYSTEM: All parts of the electrical panel are made of first quality materials. (SIEMENS, SCHNEIDER, ABB etc.) • Production line will use 380v +/-%10, and 3 phase 25 kW of electrıcity and compressor with capacity of 6 bar and 500 liters. • You can cut the profiles of any length you need by only entering the parameters to the control panel. The PLC parameters include “jog speed, production pieces, actual pieces, manual and automatic productions settings, calibrating setting vs.”. PACKING EQUIPMENT: • The production line includes 2 pieces packing machine for metal strips. • Manual packing machine can make locked to metal strips for profile package.

Year of construction: 2007, condition: good (used), GIETART. SPRINT 1.4. Dcsdpfx Abotvblrj Tjr YEAR OF MANUFACTURE: 2008. C/W 20 meters of powered KALTENBACH T13 infeed Rollers . 20 meters of powered KALTENBACH T13 outfeed rollers. 6 X 11 meters Lift and Carry Infeed Crosstransfers. 6 X 11 meters Lift and Carry Outfeed Crosstransfers.

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Dcsdpfexdi Agox Ab Tor

Year of construction: 1989, condition: used, sheet width 100 mm coil outside dia. 800 mm weight max. in kg 150 kg speed 0 - 60 m/min total power requirement 2 kW weight of the machine ca. t dimensions of the machine ca. 2,89 x 1,38 x 1,4 m 2 x 150 kg band width 100 mm diameter of the mandrel min. 170 max. 540 mm -Coil rewinding system with 3 single coils decoiler, type 150.2: Dcedpjb U Hwwofx Ab Tjr -Spool width: 140mm -Spreading: manual bolt spreading -Spool outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle winding reel, type 150.1: -Brake: engine brake -Side shift: manual via spindle

Year of construction: 2007, condition: like new (used), FICEP 601 DZB CNC DRILLING LINE with 4 way SCRIBING FACILITY Dcsdpfx Aoh N Taajb Tsr I-Beams (without camber): Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 310mm. UNP Channels (web downwards): • Web height minimum 60mm maximum 610mm. Flange width minimum 30mm maximum 300mm. Angles • Flange height (unequal flanges as well) minimum 50 x 50 x 5mm maximum 250 x 250 x 40mm. Flats • Width minimum 100nn maximum 610mm. Square tubes • Size minimum 60 x 60mm maximum 300 x 300mm. Rectangular tubes • Size minimum 60 x 30mm maximum 600 x 300mm. All beams • Maximum thickness that can be drilled 50mm. Maximum length (infeed) 12000mm.

Year of construction: 2000, condition: excellent (used), Kaltenbach / APS CNC Flat Bar / Angle Punching / Shearing Line – Year 2000. 500mm Capacity Flat Bar. 60mm x 160mm Angle. 3 head Punch. Horizontal punch. Dcjdpfx Abeirakrj Tsr 12 metres Gripper feed. Mitre Shearing.

Condition: excellent (used), Year of construction: 2012, DRILLING MACHINE: Power consumption, kW 9 Maximum thickness of the processed wall 40 mm Minimum thickness of the processed wall 6 mm Diameter of holes 6 - 40 mm Tool rotation speed 0 – 2100 rpm Dedpfxsvkp Dhs Ab Tecr Tool change automatic Feed gripper movement speed 1 – 720 mm/min Horizontal clamping force 1 x 2.5 tons Vertical clamping force 4 x 1.5 tons Dimensions of workpieces to be processed: Maximum 1200 x 600 mm Minimum 80 x 6 mm SAWING MACHINE CPI 105DI

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT Dcsdpfxexmvm Re Ab Ter KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Dodpjig T Abjfx Ab Tjcr Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Dodpfx Absvkphgj Tjcr Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. Djdpfx Abjv U Ea Hs Tscr 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Dcedpfx Aolff H Eeb Ter Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Year of construction: 2012, condition: excellent (used), 3 Spindle. 21 Metres of In‐feed rollers. 21 Metres of Out‐Feed Rollers. Dcsdpfsh Rrxpsx Ab Ter 1.25 metres Sections. Roller Feed measuring. Cross Transfers.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Dcedevpafyepfx Ab Tor Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg