Used Roller Press for sale (20,203)

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection Nljdow I Ui Ujpfx Ad Soc with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Flexible, pneumatic press with very short setup times The press consists of a sturdy press frame, a smoothly movable press carriage, and horizontal and vertical press jaws. All controls are conveniently accessible. The MPH 100 achieves a clamping effect of the press carriage when pressing – similar to a screw clamp. - Equipped with 3 vertical press jaws - Equipped with 2 horizontal press jaws - Cabinet length: 380 - 2500 mm - Cabinet depth: max. 600 mm - Cabinet height: 350 - 1200 mm Nledpfxsy Ih Ryo Ad Ssc - Pressing force: 3.6 kN / press jaw - Working height: 600 mm - Weight: 1.1 t - Operating pressure: 6 bar Availability: short-term Storage location: 63934 Röllbach

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Nlodjw Nafkepfx Ad Ssc Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and carpenter’s boards • Low space requirement and front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment – practical and functional • Vertically movable supports with frame pressing mechanism Technical data: Working surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of the hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Njdpfx Ajkwhb Hjd Sslc Overall dimensions: approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical specifications: Electro-hydraulic frame press control Pressing force up to 1,200 kg Two movable longitudinal pressure beams mounted with double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders can be adjusted via quick-release pressure lever with automatic locking Two electro-hydraulic control valves (with 3 switching stages) operated by hand levers This allows for precise pressing and assembly of even the most complex frame constructions Working height x working length: 2,000 x 3,000 mm Equipped with 3 vertical pressure cylinders Equipped with 2 horizontal pressure cylinders Stroke of pressure cylinders: 120 mm Three-phase motor: 1.3 kW Pressure control unit / pressing force adjustable: 0 - 60 bar Space requirement: 3,950 x 900 x 2,550 mm Weight: approx. 620 kg Availability: short-term Location: Flörsheim Nodpfxjwwxywe Ad Sslc

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Nlsdpfx Adoywpt Ie Sec Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture: 2017 (has not yet been used in production) The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Nodpfx Adekwg Sze Sslc Availability: short notice Location: Röllbach

Condition: used, Automatic Jogger with Press Rollers Baumann BSB 6 L Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Baujahr / Year 2003 - Serial-No. 211826 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 400V - 50 Hz Nledpfx Adszgnvqo Soc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Heidelberg GTO 52 Year of manufacture: 1983, total print count: 13.4 million, conventional dampening system (blanket), Nljdpfx Aszgkb Ajd Sec Plus version including numbering unit Inline coating system KVE 52 (for full and partial coating) UV drying system ADNOS 1UV46 (for curing UV inks and coatings)

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Nledjzgg Sqopfx Ad Soc Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Specifications: X/Y axis working area: 3000 x 1500 mm Z axis working area: 115 mm Control system: SINUMERIK 840D sl USB port: yes Dimensions: Length: 11400 mm Width: 7000 mm Height: 3200 mm Control, hardware, electrical equipment Control system: Siemens 840D SL User interface: Windows 10 IoT Screen: Multi-touch monitor Screen size: 19" Interface: USB Axis data - Max. speed Speed: 235 m/min Working area X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 116 mm Max. workpiece weight, pallet changer: 1100 kg Max. workpiece weight, both pallets: 2200 kg Laser-specific data - TruDisk 8001 Max. laser power: 8000 W Max. sheet thickness, structural steel: 25 mm Max. sheet thickness, stainless steel: 40 mm Max. sheet thickness, aluminum: 25 mm Max. sheet thickness, copper: 16 mm Max. sheet thickness, brass: 10 mm Configuration: ⦁ Working area: 3000 x 1500 mm ⦁ Enclosed machine frame ⦁ Machine cooling unit (water-air) ⦁ Automatic pallet changer in longitudinal direction ⦁ High-speed cutting package ⦁ Water-air cooling unit ⦁ Laser extraction ⦁ Smart Beam Control (intelligent beam monitoring) ⦁ Performance package for fusion cutting ⦁ Installation: Left-hand side ⦁ Cleaning brush ⦁ Integrated camera ⦁ Smart Collision Prevention ⦁ Automatic nozzle cleaning ⦁ Electric roll-up cover ⦁ Nozzle changer ⦁ Wireless operation point ⦁ Copper cutting package ⦁ Brass cutting package ⦁ Performance package for fusion cutting ⦁ Coolline ⦁ Brightline Nljdjzgf Tgspfx Ad Ssc ⦁ Teleservice Automation: ⦁ Loadmaster (Liftmaster also available as an option)

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Nlodpjrivu Sjfx Ad Sec Pressing force: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connection power: 400 V / 95 kVA 23626

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Nsdpfx Adey S Rqwj Selc Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram Nledpfx Adey R Nnfs Ssc o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2003, total length: 3,000 mm, total height: 1,700 mm, total width: 1,000 mm, Colour: White Empty weight: 1.000 kg Price: On request - Year: 2003 - Documentation available: Yes - └ Type Documentation: Technical data - CE marking present: Yes - CE certificate present: No - Serial number: 30058 B - Max. working width [mm]: 1320 - Min. throughput height [mm]: 3 - Max. throughput height [mm]: 100 - Number of rolls [pcs]: 2 - Transport dimensions: 3000mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Nledpfx Ajxwuwved Sjc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Nlsdpfezgfv Usx Ad Sjc Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press Nodpfx Aszgdc Hsd Selc The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: excellent (used), functionality: fully functional, SIPA veneer press with shelf, 2500×1200 Nlsdpfxozganxo Ad Sjc Shelf length: 2500mm Shelf width: 1200mm Press with 4 hydraulic cylinders Shelves heated with water from the boiler

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, Fortuna A 3 H + Roll Divider Njdpfxjxvk Rij Ad Selc Dough dividing and rounding machine Roll divider, top model Fortuna Automat, size 3+ with rounding function robust technology Head cleaning to the rear, electrically operated Dividing head with stainless steel blade Dough capacity up to 2400 g, depending on the dough type Connection: 400 V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Platform or mobile base Rounding plate Service package Maintenance contract Spare parts box for added security Delivery service Training and commissioning More top dough dividers in stock!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Record Roll Press Semi-Automatic Nljdpfx Asy Ebkbjd Sjc for consistent quality! Dividing head NEWLY redesigned Stainless steel knives NEW simple, robust engineering! with 3 forming plates only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm (WxDxH) Refurbished used machine, SAB inspected with warranty & spare parts service Visit our large showroom!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 08/2028, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, input frequency: 50 Hz, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 16 A, Semi-automatic dough divider and rounder, bun press Model: Divobun 3-40 NEW proven technology ... already tested extensively! Stainless steel blades with easy-to-clean setting! Dough portioning from 40 to 120 grams/piece simple technology! Machine is mobile only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine, SAB tested 2-year warranty + spare parts service Options: Leasing & rental service Maintenance contract Stainless steel machine platform Rounding plate Spare parts box Delivery service Instruction / commissioning Nledpfxjrkzf Ss Ad Ssc Many more bun presses in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total length: 690 mm, total width: 990 mm, total height: 1,580 mm, DGUV certified until: 08/2028, overall weight: 258 kg, input frequency: 50 Hz, type of input current: three-phase, Baguette – Long Roller Sinmag Model: SM2-380 S Capacity: min. 50 – max. 1200 g With felt belts for soft doughs 3 infeed rollers for greater dough tension Rolling width: up to max. 750 mm Simple technology for consistent quality! DGUV V3 tested, exclusively available from us Connection: 400V, 16A-CEE plug Dimensions: 990 x 690 x 1580/1730 mm (with frame), W x D x H NEW machine, SAB tested 24 months warranty + spare parts service Optional: Maintenance contract Nsdpfju Rz Dwox Ad Solc Spare parts box Service package Guide for loaf bread Delivery service Instruction and commissioning Leasing & rental machine service We have a large selection of bakery machines in stock for you!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 08/2028, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, input frequency: 50 Hz, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 16 A, NEW NEW Bread Roll Press NEW NEW Semi-automatic dough divider and rounder, TOP model: Divobun 3-30 NEW proven technology… already tested extensively! Stainless steel blades with easy-to-clean setting! Dough piece weight: 25 to 80 grams only available from us, DGUV V3 certified Connection: 400V, 16A CEE plug New machine & SAB certified 2 years warranty + spare parts service Optional: Nedporkzghefx Ad Selc Delivery service Leasing & rental service additional forming plates maintenance contract service package training & commissioning Other top-quality dough dividers in stock!

Condition: used, Year of construction: 2019, Paint application machine with reverse-running metering roller. Application machine for primers and top coats. Adjustable speeds via frequency converter for transport, application roller, and metering roller. Control panel with touch screen for setting all machine parameters. - Manufacturer: Cefa/Sorbini - Type: SMARTCOATER MF-EVO - Year of manufacture: 2019 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height: 3 - 80 mm Njdpfx Aozf N Tusd Selc - Operating side: right - Paint application roller ~ 50 - 60 Shore - Application quantity ~ 4-50g/m² - Roller diameter: 250 mm - Dosing roller: 173 mm - Dosing roller with switchable reverse operation - Double diaphragm pump 1 piece - Transport system with belt - Compressed air connection: 6 bar - Mobile on flanged rollers - Feed speed ~ 4 - 20 m/min - Control cabinet on the machine, traveling with it - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Location: not in stock - Available from August 2026

Year of construction: 2001, condition: used, machine/vehicle number: A 01 02 004/ 0300, - Manufacturer: Venjakob - With dust cover including folding doors - Connections for ventilation and air release - Fully covered under the rollers - Year of manufacture 2001 - Working width 1,300mm - Working height: 900 +- 20mm Nledpfx Adszf N Rmj Ssc - Roller diameter: 80mm - Roller pitch: 140mm - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet