Used Robofil 2020 for sale (1,966)

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment Fjdpfx Aoykar Hskyjpn Left/right, 6 speeds Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Fpsdpfxjyfh Uls Akyjn Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Hours: 34535 Available 3 units (2020-2019)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Fpjdpfx Asu Tln Nekyjn Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Fjdpfx Akjzux T Nsyepn Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2020, clamping force: 300 kN, Clamping force: 300 t Screw diameter: 60 mm Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hybrid Hours: 23000 core puller 1 pneumatic core puller controll euromap 67 2 servo pumps. Fpsdjyfh Rmepfx Akyjn machine is without robot and accessories.

Year of construction: 2020, condition: used, SCS AUTOMABERG TRIM & PERF Fsdpfx Ajyr Eh Nskyspn year 2020 Universal machine for die cut, trim, split, cut, perforate or punch of products. For inline production. Technical specifications: mechanical speed: up to 9.000 cycles/h size range untrimmed max.: 500 x 600 mm size range untrimmed min.: 50 x 50 mm product thickness standard max.: 4 mm

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Fpsdpfx Aevl Skaekyon Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: used, Year of construction: 2020, GS International 10t Bj 2020 Fsdpfx Ajznfduokyjpn Width Length 12 mtr Hydraulic adjustable Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: used, mileage: 189,864 km, power: 335 kW (455.47 HP), first registration: 09/2020, fuel type: diesel, empty load weight: 11,380 kg, maximum load weight: 14,620 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, total length: 7,700 mm, total width: 2,550 mm, total height: 3,250 mm, loading space volume: 12.46 m³, loading space length: 5,150 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, displacement volume: 10,677 cm³, nominal power: 335 kW (455.47 HP), Equipment: ABS, Bluetooth, EBS, USB port, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, parking heater, power mirror, retarder, seat heater, trailer coupling, Key Features Internal Reference: 26408M Chassis Number: W1T 964 214 104 598 22 Vehicle Model: Arocs 2646 6x4 3-Sided Tipper Schwarzmüller Vehicle Brand: Mercedes-Benz Product Category: Truck Tipper Condition: Used Mileage: 189864 Emission Standard: Euro 6 Date of First Registration: 04.09.2020 Fuel Type: Diesel Engine Displacement (ccm): 10677 Engine Power: 456 Transmission Type: Fully Automatic Suspension: Steel-Steel Retarder/Intarder: Yes Cab Vehicle Equipment: ABS, Adaptive Cruise Control, Trailer Coupling, Bluetooth, CD Player, Differential Lock, EBS, Electric Windows, Electric Mirrors, ESP, Navigation System, Emergency Stop Assist, Radio, Seat Heating, Auxiliary Heater, Cruise Control, USB Interface Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 6x4 Axle 1: 385/65 R 22.5/13mm, Disc Brakes, Leaf Spring Suspension Axle 2: 315/80 R 22.5/8mm, Disc Brakes, Leaf Spring Suspension Axle 3: 315/80 R 22.5/5mm, Disc Brakes, Leaf Spring Suspension Number of Axles: 3 Weights & Dimensions Gross Vehicle Weight: 26000 Gross Train Weight: 44000 Payload: 14620 Unladen Weight: 11380 Vehicle Wheelbase: 3300 Vehicle Height: 3250 Vehicle Length: 7700 Vehicle Width: 2550 Body Body Manufacturer: Schwarzmüller Body Model: 3A-3S-Tilting Body Body Internal Dimensions (l x w x h): 5150/2420/1000 Body Year of Manufacture: 2020 Fedpfsz Hq H Aox Akyspn Body Equipment: Trailer Hydraulics, Cabin Control, Auxiliary Drive Body Note: Schwarzmüller, 3A-3S-Tilting Body, 2020, Trailer Hydraulics, Cabin Control, Auxiliary Drive

Condition: used, mileage: 358,094 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, empty load weight: 16,300 kg, maximum load weight: 23,700 kg, overall weight: 40,000 kg, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, total width: 2,550 mm, number of cylinders: 6, displacement volume: 12,742 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, EBS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, retarder, seat heater, Key Features Internal Reference: 26100M Chassis Number: YS2 P0X 400 Serial Number: 683.546.203 Vehicle Model: P 500 10x4 3-SK Trösch / Swiss-Vehicle Vehicle Brand: Scania Product Category: Tipper Truck Condition: Used Mileage: 358094 Emission Standard: Euro 6 Date of First Registration: 21.02.2020 Last Periodic Technical Inspection: 17.02.2025 Fuel Type: Diesel Engine Displacement (ccm): 12742 Engine Power: 500 Fpsdpfsz Hrlmsx Akyon Transmission Type: Fully Automatic Cylinders: 6 Trailing Axle: Steerable Suspension: Steel-Air Hydraulic System: Tipping Hydraulic System Retarder/Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, EBS, Electric Windows, Electric Mirrors, ESP, Radio, Heated Seats, Cruise Control, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 10x4*6 NLA Axle 1: 315 / 80 R 22.5/11mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Suspension Axle 3: 315 / 80 R 22.5/9mm, Disc Brakes, Air Suspension Axle 4: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Axle 5: 385 / 65 R 22.5/11m, Disc Brakes, Air Suspension Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight: 40000 Payload: 23700 Unladen Weight: 16300 Vehicle Width: 2550 Body Body Manufacturer: TRÖSCH Body Model: 3-Sided Tipper Body Year of Manufacture: 2020 Body Equipment: Cab Control, Auxiliary Drive

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Fpsdeyi Twgjpfx Akyen Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: used, fuel type: diesel, Year of construction: 2020, IVECO STRALIS XWAY 480, 3-axle tractor unit, year 2020, wheelbase 3800, suitable for bodies ranging from 6.20 to 6.80 meters, automatic transmission, retarder, intelligent third axle, 725,000 km, front leaf spring suspension and steel bumper. Financing or leasing options available. Fpjdjz Df Tropfx Akyen Benito: 3383844139 Michele: 3394588233

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Fpedpfx Aew Ucyujkyen Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 2020, Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently located at the owner's factory and is being sold because they are investing in another production line. Components: Filtering bottom Cutting blades Motor, gearbox with its speed variator Automated Guillotine valve for spent grain discharge Upper door Leg extensions CE certification and tank blueprints Fpodotq Dzpepfx Akyjn

Condition: used, empty load weight: 2,480 kg, total length: 5,950 mm, total width: 2,550 mm, total height: 1,850 mm, Key Features Internal Reference: 26333M Fpedpfx Aez Hpdtjkysn Chassis Number: HE 3977 Vehicle Model: RTSK 12 Tipper Body / Swiss-Vehicle Vehicle Make: Other Product Category: Hooklift Container Condition: Used Weights & Dimensions Unladen Weight: 2480 Vehicle Height: 1850 Vehicle Length: 5950 Vehicle Width: 2550 Body Body Manufacturer: Owipex Body Model: RTSK 12 Tipper Body Body Manufacturing Year: 2020 Body Note: Owipex RTSK 12 Tipper Body, manufactured in 2020. Hooklift container with hook connection, hydraulically tilting body on subframe with running rollers, electric vibration motor (vibrator) with switch box on the subframe. According to the nameplate: Type RTSK 12, Product No. HE 3977, Year of Manufacture 2020, Unladen Weight 2480 kg, Length 5950 mm, Width 2530 mm, Height 1850 mm. Manufacturer: Owipex GmbH, CH-8836 Bennau. Swiss vehicle / Swiss-Vehicle.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Fodpsykbimofx Akyopn Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Fedpfxey S Axts Akyopn Travel X-axis: 500 - mm Weight approx.: 3,350 kg Control: CNC-Steuerung Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 79 h, load capacity: 227 kg, lifting height: 5,650 mm, overall weight: 1,016 kg, fuel type: electric, Mast lift chickens Snorkel TM12 CE Brand: Snorkel Model: TM12CE Type: mast lift Serial number: 200302833 Year of construction: 2020 Operating hours read: 79 hours Fuel: electric Working height: 5.65 m Load capacity: 227 kg Fsdpsrhzagefx Akyopn Machine weight: 1016 kg Wheels: trackless Options: Platform dimensions 0.68 x 0.99 m Extendable up to 1.5 m New battery from 2023 Good used condition, Machine has been repainted. Forklift is available for loading Collection by appointment in 75053 Gondelsheim Shipping by courier possible, please inquire about zip code.

Condition: good (used), Year of construction: 2020, operating hours: 8,965 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H25D-01 Triplex 470 Freelift / Sideshift Deutz Diesel 2020 Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers and attachments. All our deliveries are at trade prices in 'AS-IS' condition without warranties. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Fpjdpfx Aoyi Uvkjkyon 5391 LR Nuland

Condition: used, Year of construction: 2020, - Feed - Cutting - Cleaning - Infrared heating - UV curing - Coating - Digital printing - Structuring - Excimer matting - Stacking Fpsdpfx Akjzuzfzjyen Digital printing system Manufacturer: Hymmen Type: JUPITER - JPT C 680/548 with OFS 850 Year of manufacture: 2020 Technical data - Nominal width: 680 mm - Maximum printing width: 548 mm (expandable to 680 mm) - Maximum panel width in the OFS: 510 mm - Working height: 900 mm (+50 mm) - Processing: Printing and top coating from above, back coating from below - Operating mode: two-lane up to a max. part width of 255 mm; otherwise single-lane - System speed: 8-65 m/min - Printing speed: up to 50 m/min Jupiter digital printing unit (JPT): - Number of colors: 4 - Print heads per color: 8 (max. 10 possible) - Free slots for additional colors: 6 - Print head type: XAAR 2001 Printing unit with DLE structure: - Printing rows: 1 - Print heads per row: 8 (max. 10 possible) - Free slots for additional rows: 1 - Total print heads: 8 - Print head type: XAAR 1003 Specifications of the raw panel: - Length: 600-2800 mm - Width of the raw board before the longitudinal cutting process: 900-1260 mm - The panels are split in the longitudinal direction before digital printing and coating - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Cutting format saw: - Longitudinal slitting system with up to 5 saw cuts plus 2 trimming units for the production of finished panel widths of 160-510 mm Specifications for finished panels: - Length: 600-2800 mm - Width: 160-510 mm - Thickness: 2-12 mm (without limitations); up to 28 mm with speed limitation Feed system (feed): - Type: Vacuum portal - Feed stations: 2 - Discharge stations: 1 - Maximum feed rate: 8 cycles/min; with double stacking: 16 panels/min - Identical stacks per station: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm - Maximum stack weight: 5000 kg (combined) - Design: without pits - Type of transport: protective plate or pallet - Protective plate (infeed): Length 800-2800 mm; Width 1000-1260 mm; Thickness 20-30 mm (up to 150 mm for pallets); max. 80 kg per panel/pallet Stacking system (outfeed): - Type: Drop shaft - Stack positions: 1 - Maximum stacking rate: 30 cycles/min - Identical stacks per position: up to a panel length of 1550 mm = 2; =1550 mm = 1 - Maximum stack height: 1050 mm (alternatively: 1000 mm) - Maximum stack weight: 5000 kg (combined) / Alternative stack configuration maximum stack weight: 3500 kg - Design: with pits - Type of transport: protective plate or pallet - Type of protective plate feed: loading by forklift, separation by robot - Protective plate (stacking): Length 800-2800 mm; Width 1000-1200 mm; Thickness 20-30 mm; max 80 kg per panel; Material OSB or HDF Units: - Number of units: 35 - Process steps: Feed, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking Application: - Industrial single-pass digital printing line for the high-speed surface finishing of large panels (flooring and furniture), which creates realistic wood, stone, or custom decors directly onto substrates. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, operating hours: 7,828 h, functionality: fully functional, mileage: 57,905 km, power: 62 kW (84.30 HP), first registration: 10/2017, overall weight: 4,500 kg, fuel type: diesel, color: orange, axle configuration: 4x2, empty load weight: 2,950 kg, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, loading space volume: 2 m³, Equipment: ABS, air conditioning, trailer coupling, self-propelled working machine, street sweeper: + Bucher + CityCat 2020 + First registration: 06.10.2017 + 57,905 km; 18,911 sweeping km + 7,828 total operating hours; 5,702 sweeping hours + VM diesel engine, 4 cylinders, 2970ccm; 84 hp; EURO 6 + Hydrostatic drive, max. speed 50 km/h + 2 front brushes + 3rd brush, can be swiveled to the left and right; direction of rotation can be changed + Fresh water tank with dust suppression nozzles Fpedpfx Aez Egycekyjn + High-pressure cleaner with pistol behind the cabin + 2 m³ stainless steel waste container, can be tipped to the rear + Tow hitch + Air conditioning + Articulated steering + 5480mm x 1300mm x 2190mm (l x w x h) + Unladen weight: 2,950 kg; permissible total weight: 4,500 kg + From municipal ownership Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, first registration: 12/2020, loading space volume: 34 m³, total length: 6,280 mm, total width: 2,550 mm, total height: 3,920 mm, suspension: steel-air, tire size: 385/65 R 22.5, wheelbase: 3,900 mm, color: white, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Aluminum fuel tank - External thermometer - Heated exterior mirrors - Passenger seat - Leaf suspension - On-board computer - Hands-free kit - Roof hatch - Roof spoiler - Digital tachograph - Electric windows - Electrically adjustable exterior mirrors - High beam headlights - Speed limiter - Cruise control - Lift axle - Air conditioning - Refrigerator - Alloy wheels - Air suspension - Air horn - Navigation system - Fog lights - Particulate filter - Reversing camera - Sleeper cab - Side door - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication - Central locking system = Additional information = General information Number of doors: 2 Registration number: 57-BPX-3 Technical information Engine power: 346 kW (470 hp) Number of cylinders: 6 Engine displacement: 12,419 cc Drivetrain Fuel type: Diesel Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R 22.5; Alloy rims; Max. axle load: 9,000 kg; Steering; Tire tread left: 30%; Tire tread right: 60%; Suspension: Leaf suspension Rear axle: Tire size: 315/80 R 22.5; Twin mounted tires; Differential lock; Alloy rims; Max. axle load: 11,500 kg; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 50%; Reduction: single reduction; Suspension: Air suspension Weights Kerb weight: 7,312 kg Payload: 13,188 kg Gross vehicle weight (GVW): 20,500 kg Functional Superstructure brand: LAKO T344 RMO JANSKY OPTIMATE Pump: Yes Hoses: Yes Fedpey R Atnefx Akyopn Interior Number of seats: 2 Environment Emission class: Euro 6 Maintenance, history, and condition APK (Roadworthiness test): valid until 12/2026 Technical condition: very good Optical condition: good

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Fjdpfx Akey R Dtcjyopn

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm Fpsdpfx Asxacdvekyon side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: like new (used), mileage: 197,000 km, fuel type: diesel, Year of construction: 2020, IVECO DAILY 35-14, year 2020, 197,000 km, isothermal box, internal dimensions 3.80 x 2.30 x 2.10 m, Dhollandia tail lift 750 kg, air conditioning, factory stereo. Fpodpfjykbhcex Akyjn