Used Roba for sale (205)

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen Knodeu Utzyspfx Affef • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning Ksdpfx Aoiu Smboffenf 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Year of construction: 2019, condition: ready for operation (used), A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible. Knodpfx Asxqqmgeffof

Year of construction: 2019, operating hours: 156 h, condition: used, Serial number: W09W80215K3T6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16207 Kodevg Nc Aopfx Affonf Specifications: - 2019 model - Taken out in 2021, says the owner - CE marked - Hours: 156 (will increase) - Good tires - Sort waste - Ready for delivery. Description: Terra Select W80 sorts waste. Well suited for crushing materials to remove impurities such as plastic. Only 156 hours, but will probably increase as it is in daily use. Ready for delivery. Hours: 156

Year of construction: 2021, condition: used, Year: machine 2021 Condition: Excellent (aș new) Perfectbinder KM41 SC/HC Configuration: - non/Stop production Kjdpfx Afsitycqofenf - book block feeder - jogging station with adjustable intensity - milling and notching station with separate drives and speed adjustable - integrated endsheet feeder - endsheet side gluing with Robatech hotmelt nozzles - endsheet position adjustable to the book spine - spinegluing with Hotmelt roller glue unit and Robatech hotmelt premelter - spinegluing with Coldglue unit with pump and level control - backlining station - nipping and pressing station - pile cover feeder with 4 scorring rails - cover and lining side gluing with RobatechHotmelt nozzles - delivery with lay down unit Binding options: HOTMELT adhesive or white dispersion adhesive Specificacion: - paper size max. 390mm x 300mm x 60mm, min. 140mm x 100mm x 3mm - speed: up to 40 cycles / minute - dimension: Length 6400 mm Width 2150 mm Height 1600 mm - weight: 3100 Kg - power consumption:9 KW 230/400V 3N, PE, 50 Hz - compressed air:1800 NL/h - 6 bar

Year of construction: 2025, condition: new, functionality: fully functional, Corrugated box making machine is a machine designed for the production of cardboard boxes. Boxmaker is very easy to operate and adjust. It is characterized by very fast and precise work as well as the possibility of very easy adjustment of the machine. Technical details:  working width: 2400mm  large touch screen 15"  all settings for box production is controlled from touch screen Knedpfxswt S Dzs Affef  all set up is automatically simultaneously, 1 minute set up  capacity: ≈ 800 boxes per/hour  minimum board size (WxL): 200 x 400mm (minimum box 100x100x100mm)  maximum board size (WxL): 2400mm x unlimited  table feeding  segment slotting knives: 600mm (200 + 4x100mm)  slot width: 8mm  4 scoring wheels  3 circular knives for longitudinal cutting  cross cutting  multi cutting  gluing unit (cold glue by Robatech)  VPN connection  preprogrammed FEFCO styles (more than 40 fefco codes)  self design option  catching table  voltage: 3x380V  installed power: 10.85 kw

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Knodpfjxf Uxcsx Affof

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Ksdpfxou R Rtbs Affsnf Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Very stable cast iron clamping table with 7 T-slots Dimensions : 1000 x 1000 x 840 mm Thickness of the cast plate incl. ribbing at the bottom approx. 130 mm Was probably originally a machine table T-slots: opening width at top approx. 25 mm Groove width at bottom approx. 43 mm Sturdy substructure with doors and two shelves Kodpfx Aoxnqxkoffenf Condition : Surface hardly damaged ! Grooves not broken out

Year of construction: 2008, condition: good (used), Rocker with belt conveyor, approx. 5,65m - second-hand - : Price per piece: 1.250.-€ (net), dismantled and loaded! (BF 3160) Knodpjfyn Egofx Affef Manufacturer: Van der Lande Year of construction: unknown - probably 2008 Element width: approx. 75cm, belt width: approx. 60cm Length: 2,55m plus 3,10m Total length approx. 5,65m Element height: approx. 18cm With pneumatic cylinder Overcomes a height difference of approx. 70cm The belt is slightly reamed on one side

Year of construction: 1910, condition: as good as new (ex-display), Laser Welding Head Laser Processing Head HIGHYAG Laser Technology PDT Kjdpfsf Ucn Eex Affsnf as good as new from stock clearance, probably never used incl. (everything as shown): - Focusing module 0,75; Lambda = 900-1060nm - PDT Zoom Collimation - Compact SGM 2 - Info Label: HAN: SE05010/1083: V4.9: 90 800 333 Control unit PDT: PDT-D

Condition: ready for operation (used), functionality: fully functional, torque: 19,000 Nm, Hydrobase Engine Construction size 3... 20 Displacement 160... 3000 cm³ Maximum pressure up to 470 bar Knedpfx Aev D If Rsffof Drive output up to 19,000 Nm There are minor patches of rust; however, it is unused and ready for use.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm Knedpfxoxf Up Ue Affof - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Kodpfx Afjtyqizefonf Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: repair required (used), functionality: unexamined, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, Measuring range appx. 500x400x300 - with computer, but without software and probe - incl. DCC controller (probably working) - was equiped with PH10M and SP25M Knsdpfx Asvmd Ruoffsf for spares or retrofit only

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B Knodpfx Afjv N U U Nefsf - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Year of construction: 2005, condition: used, most probably unused part -No: RC 08 05 4402 P_nominal: 75kVA_ 20%ED Prim.: 500V F=1000Hz Sec.: 8,4V Knedpjdq E Hxjfx Affsf Sec. short circuit current: 23,7kA 86kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 200 mm, total height: 1,730 mm, total length: 2,350 mm, total width: 1,590 mm, quill diameter: 42 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, CNC Lathe BOLEY BE-42 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2002 CNC control: MITSUBISHI Meldas 635LCC Max. turning diameter: 140 [mm] Stroke Z1 axis: 200 [mm] Stroke X1 axis: 170 [mm] Stroke Z2 axis: 395 [mm] Stroke X2 axis: 110 [mm] Stroke Z3 axis: 170 [mm] Stroke X3 axis: 110 [mm] Spindle nose: 48 DIN 6343 Spindle throughbore: 42 [mm] Min. spindle speed: 80 [rpm] Max. spindle speed: 8000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 7.5 [kW] Counter spindle throughbore: 42 [mm] Min. counter spindle spindle speed: 60 [rpm] Max. counter spindle speed: 6000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Type of tool holders: VDI 20 Number of tool stations - Turret 1: 12 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 4500 [rpm] Number of tool stations - Turret 2: 12 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 4500 [rpm] Lubrication tank capacity: 210 [l] Total power required: 14 [kVA] Rated current: 20 [A] Supply voltage: 400 [V] RS232 Interface: Yes Dimensions: 2350 x 1590 x 1730 [mm] Weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 LNS HYDROBAR bar feeder x1 coolant tank x6 radial live tool holders VDI 20 x5 axial live tool holders VDI 20 x21 static tool holders VDI 20 x1 parts catcher basket VDI 20 x17 VDI 20 blanking plugs x28 collets x4 collet chucks x1 3-color status light x1 "Electrical diagrams" manual x1 "Operation & Maintenance" manual x1 Operator’s manual Kodpfx Afow Slrnjfsnf Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Biglia, Index, Tsugami, Miyano, Star, and DMG Mori Tornos lathes, but also milling machines, grinding machines, and CNC.

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Kedpjqgpb Eefx Affjnf Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Machine for the production of platform-type cartons for vegetables, fruits, and confectionery products. The machine is technically sound, with low operating hours (less than 4 million pieces). Adapted for packaging production in sizes 20×30 cm, 30×40, 30×50, and 40×60 cm. Last year, the glue tank was replaced with a Robatech unit. Please contact me for further information. Kedoxb Ufhspfx Affjnf

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 320 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 8 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - X/Z stroke : 115/120 [mm] - Y stroke : 100 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 4 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 40 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3600 X 2200 [mm] - Machine height : 1780 [mm] - Machine weight : 4600 [kg] EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank Kodeuhawbopfx Affonf * with high-pressure pump * with cooling unit for coolant - Bar loader : LNS HYDROBAR MINISPRINT - Oil mist extractor : DONALDSON - Cooling unit - Fire extinguisher * - Electric transformer - Long part device - Number of turning tool holders : 10

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Kjdpfolqac Sox Affsnf Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Travel : 205 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 5 - Number of motorized positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.269 x 1.160 [mm] - Machine height : 1.693 [mm] Ksdpfouwd Ryjx Affjnf - Machine weight : 1.800 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader : LNS Hydrobar Express 332 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 - Centers height : 175 [mm] - Distance between centers : 1000 [mm] LINEAR AXES - Grinding length : 500 [mm] - Travels X x Z : 267 X 650 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Continuous orientation : +/-8,5 [°] - External wheel dimensions : 500 x 80 x 203 [mm] - Grinding wheel holder headstock power : 7,5 [kW] - Cutting speed : 44 [m/s] Ksdpfeuhbydox Affenf PART HOLDER HEADSTOCK - Taper type : CM5 - Axis C : +/-0.5[°] - Power : 1 [kW] - Rotation speed : 30-1000 [Rpm] TAILSTOCK - Taper type : CM3 - Quill travel : 35 [mm] - Quill diameter : 50 [mm] - Max. part weight between centers : 130 [kg] ELECTRIC SUPPLY - Supply voltage : 400V 50 Hz - Machine dimensions : 2700 x 2350 x H. 2100 [mm] - Weight : 4 000 [kg] HOURS - Working hours : 17.775 [h] EQUIPMENT - CNC FANUC 16i-TA control - Pictogramming - Studer RELEASE C - Electronic handwheel - SENSITRON - Dynamic balancing device : Hydrobalance HBA 40000-1 - Automatic length probe arm MOVOMATIC C25 - Automatic outer diameter probe arm in-process MOVOMATIC - Grinding wheel safety guard with automatic toppling - Fixed grinding device upon part-holder headstock - Coolant tank : 375 [l] - Paper filtering unit - Oil mist extractor - Wheel-holders flanges

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 14 [kW] - Spindle speeds : 6.000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle power : 9,7 [kW] - Spindle speeds : 5.000 [rpm] - C axis indexing precision : 0,001 [°] - Travel : 330 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 425 / 550 [mm] - Y stroke : 200 [mm] - B Axis stroke : -105 / +105 [°] Kjdjuhal Eepfx Affjnf - B axis indexing precision : 0,001 [°] - Tool type : HSK40 - Spindle speeds : 25.000 [rpm] - Spindle power : 10 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 17 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.548 x 1.922 [mm] - Machine height : 2.686 [mm] - Machine weight : 6.500 [kg] EQUIPMENT - CNC : Num Power 1050 - Interactive programming - 3 colors status lamp - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON - Spindle cooling unit - Parts catcher - Bar loader : LNS HYDROBAR MINI-SPRINT