Used Rims for sale (2,483)

Year of construction: 1990, condition: used, Manufacturer : Dumoulin Bjdpfxsx R A Rao Aafscu Model: 5X Year: 1990 Type : Tablet coater / Drum coater Drum diameter : Ø 50 cm Total volume : 65 L Emptying / removal : frontal Spraying and cleaning nozzles Light for inside Temperature sensor Watson Marlow 313S peristaltic pump Gerbhardt and Ebmpapst ventilation and suction Mobile chasis: 4 wheels  

Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 1.7M books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Bsdpfx Aswu Spteafecu Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Condition: good (used), Edge banding, edge trimming. Veneer roll Bjdpfxewk D Rbe Aafjcu -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg

Condition: used, Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Lever arms: extendable 250 mm -for: various press jaws Bcedpfx Aaod Nzg Ajfeu -Inserts for: Cable lugs DIN 46234 installed -Dimensions: 575/140/H50 mm -Weight: 2.6 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Case: slight damage, see photos -Trimming unit: for trimming the protruding edges on the front and rear edge -Adjustment range: 400 to 840 mm -Clamping: pneumatic -Motors: Holz-Her 750 W / 2600 rpm -Saw blade: Ø 160 mm Bcjdpfxsgyg Aro Aafsu -Dimensions: 1010/450 / H540 mm -Weight: 94 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Hemag, saw unit can be swiveled by 30 ° Bcsdsgy Dbwjpfx Aafju -Saw blade: max. Ø 350 x 30 mm -Motor: Perske type DKNS 120/2 3.0 kW / 2830 rpm -Protection class: IP 54 -Dimensions: 950/780 / H630 mm -Weight: 115 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm Bsdogy T I Tspfx Aafocu -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Dimensions: 500/370 / H680 mm -Weight: 26 kg

Condition: used, Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase Bcjdpfx Aed Ar Uteafsu -Dimensions: 490/300/H70 mm -Weight: 22.4 kg

Condition: used, Terminal and trim box, road cell Bcsdpjdntfxofx Aafou -Terminal box: for up to 4 load cells -Inputs and outputs: via PG screw connections -Protection class: IP 65 -4 inputs, cable gland M12 for cable diameter: 2 to 6.5 mm -1 output, cable gland M20 for cable diameter: 7 to 12 mm -Number: 2x available -Price: per piece -Dimensions: 205/110/H70 mm -Weight: 0.8 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Bcjdpfx Aaogy T Nmsfju -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Individual components: see photos -Dimensions: 590/280 / H750 mm -Weight: 27 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling Bedpfx Aasb Uhpwsfocu -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm Bsdpeb Uhrtofx Aafocu -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 180 mm, saw blade diameter: 550 mm, working height: 850 mm, We sell 1 x JRIMAC UKS 750 under-table cross-cut saw Cross cuts: 50x800 - 160x360mm - 170x250 Max. cutting height: 180mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed Bcjdpfx Aajfl Imaofsu - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 150 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC UKS 450 under-table cross-cut saw Cross cuts: 40x440 - 100x340mm - 160x120mm Max. cutting height: 170mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm Bedporfudnsfx Aafjcu - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Year of construction: 1993, condition: ready for operation (used), Edging line DK 90 TL In operation until 18.12.2025 Consisting of: Infeed roller conveyor DK90 (incl. various saw sleeves) Slab separator ASV Machine professionally dismantled and ready for loading Bcjdpfxex Tp Tmo Aafsu

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Application: For chamfering Bcjdpsu Ngdtefx Aafou Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch *

Condition: used, Technical details: electrics - voltage/frequency: 380 V/Hz total power requirement: 1,1 kW machine weight approx.: 18 kg dimensions L x W x H: 0,32 x 0,50 x 0,25 m EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm, rotatable 15° - 45° Milling bevel width max. 5.0mm, angle 15° - 45° Bjdpfx Aaju Nggnefecu *

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Bedpeuprqwsfx Aafjcu Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: good (used), Nagel Foldnak Compact Booklet Maker with Trimmer The machine is in working order and ready for production. Very good condition. The machine stitches at two points and folds in half to create a finished booklet, while the final knife trims the front of the booklet. Description: – Regular stitching and optional loop stitching (standard staples, economical to operate) – Adjustable heads – Option to disable stitching or folding (allowing for sewing only, for example) – Push-button or photocell triggering – Copy counter – Side and front alignment – Staple indicator light – SRA3 format Bcodpfex N I Hdex Aafeu – 230V power supply Supports non-standard formats.

Condition: new, Year of construction: 2020, • CE certificate by a Notified Body. • Can be installed behind the palletSaw. • One employee dismantles and the second employee can do the cross cutting. • Five pre-set board lengths. Bcjdpfxscvm Epo Aafsu • Adjustable cutting speed. • Easy installing without any special facility. • Boards can be sorted by length on a not motorized sorting rack.

Condition: refurbished (used), BANDSAW HEADRING Mod. 1300/SG-CFC - Cast iron structure with stabilizing treatment. -right hand design (cutt from right to left!) - Flywheel diameter 1300 mm. - Flywheel width 165 mm for maximum blade width of 180 mm. -Filled flywheels with special ribs to enhance mechanical characteristics, subjected to stabilizing treatment; shaped with double curve for the best stability on the table; perpendicular to the rotation of axis. - 55kW (75 HP) main engine, automatic star-delta starter, pulley, belts and brakes -chains for timber unload HYDRAULIC CARRIAGE CFC - 4 clamps for log centering - Maximum distance from blade to clamp 1000 mm. -Max opening of hooks 900 mm - COMPUTERIZED-Mudata control system - Continuously variable speed feed from 0 - 140 ml/min and exploits the power of the main motor to obtain a quality cut, hydrostatic design -4 turning logs chain systems - Control unit and seat, multi-function joystick and electric servo control !!!!! OPTIONAL !!!!! INSTALLATION..... 40,000 EUR EXCLUDING VAT, FOR A 1-YEAR WARRANTY Bsdpfx Asxzth Ijafjcu Mechanization and unloading rollers Log ramp, length 4 m - 20,000 EUR + VAT Log loading arms on the log saw trolley, hydraulically operated with a single cylinder - 20,000 EUR + VAT Roller conveyor - EUR 20,000 + VAT - Length 7.60 m - Width 1.1 m - Rollers Ø 215 mm - Gear motor Second unloading roller conveyor - EUR 20,000 + VAT - Length 7.2 m - Width 1080 mm - Rollers 840 mm - Left/right chains - Own motorization These options significantly increase production flow, reduce downtime, and automate the log exit area. Advantages for industrial production - Complete line, fully reconditioned in 2025 - Excellent cutting stability thanks to cast iron construction - Extremely precise positioning with BRUSHLESS servo motors - High productivity and minimal maintenance - Ideal solution for factories wishing to modernize their cutting flow without investing in new equipment

Condition: good (used), Schleuniger CS 9100 Cut & Strip Machine for cable processing: Conductor cross-section: 0.0324 mm² to 6 mm² Wire length: 1 mm to 1000 meters Accuracy: Repeatability +/- 0.2% (resolution 0.14 mm). Stripping length: Partial stripping up to 30 mm, complete stripping up to 50 mm right and 30 mm left. Production rate: Up to 3,600 pieces/hour (100 mm length, 4 mm partial strip). Transport speed: 210–1400 mm/s. Blades & jaws: V-blades (standard), optional radius V-blades, diamond or knurled jaws. Interfaces: RS 232 serial port for PC communication Dimensions: 610 x 540 x 310 mm Weight: 42 kg #8450 Bjdpfx Aasx Sthlsfjcu

Condition: reconditioned (used), Year of construction: 2016, M&J / Metso 6000-12 Preshredder (Mint Condition) 2 × 200 kW HDC with new P30 hydraulic pumps Installed in 20 ft container Complete with oil cooler Cutting table 6000-12 knives Complete with bearings and renovated hydraulic motors. Bcjdsx Satuopfx Aafou Ready for immediate delivery – excellent condition, barely used. Perfect solution for high-performance shredding and heavy-duty applications. Contact us today for price and availability.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual Bjdpfof N Nlgsx Aafjcu • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: used, Year of construction: 2008, operating hours: 54,000 h, functionality: unexamined, Lindner Jupiter 3200 slow-speed single-shaft pre-shredder including hydraulic unit and control cabinet Operating hours: 54,000 bh Machine has been regularly maintained and overhauled Bcedpfx Aasx R S Sgofeu Application: Shredding of commercial and industrial waste,