Used Rewinding Machine for sale (91,817)

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm Nedpfjwka S Iox Af Eewn - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Meat grinding machine Manufacturer: Sind Voltage: 380V / 50Hz Nwodsxrhfpepfx Af Ejn

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm Wescute drill chuck: 0-20 mm Extraction port diameter: 80 mm Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Supplier Nwodpfx Afow Sy Hys Esn

Year of construction: 2022, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TF Main Drive Spindle speed range 5000 Movement X-Axis Movement 300 mm Z-Axis Movement 175 mm Tools Slots in storage 7 Njdpfx Asxrhfijf Eswn Additional Equipment LNS Bar Loader 3m This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1997, I will sell Mosca RO-M-P2, good condition. Nsdpfxev Uphus Af Ejwn

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Nsdpfx Afexrg Ebo Ejwn Subject to prior sale!

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Njdpfx Afsxrgvao Eewn Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: used, functionality: fully functional, Grinder for mincing meat Manufacturer: Sind Voltage: 380 / 50Hz Power: 15kW Size: 1550x900x1300mm Nodpfoxrhbkjx Af Eown Weight: 493kg

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Nedpfx Aov Dxzpsf Eewn Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Year of construction: 2020, operating hours: 16,597 h, condition: ready for operation (used), General Data Njdpoxrhcuefx Af Ejwn Measurements width 2130 mm Measurements depth 2880 mm Measurements height 1990 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model 840D-SL Main Drive Spindle speed range 5000 rpm Spindle motor power 24 kW Spindle bore Ø65 mm Number of axis 7 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Media Main electronic connection 60 kW Additional Equipment Coolant Tank Volume: Approximately 200 liters Hydraulic Tank Volume: Approximately 120 liters Central Lubrication Unit Volume: Approximately 2 liters Operating Current (IB): 76 A Rated Current of Protection Device (IN): 80 A This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Application Types Turning

Condition: good (used), I am selling a Teca-Print TPX 350 pad printing machine. Functional and in good condition. Njdpfxev H Sgwo Af Eswn

Condition: used, Year of construction: 1989, Diameter max. 75 mm Nsdpfx Afsxrg D Ro Ejwn Dimensions (L/W/H) 800x600x1200 mm weight ca. 150 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Nedpfxexrgups Af Eewn Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition

Condition: used, functionality: fully functional, Grinder for mincing meat Manufacturer: Sind Voltage: 380V / 50Hz Power: 11kW Size: 1250x800x1110mm Weight: 319kg Nwsdexrhbdopfx Af Een

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: PLC-controlled, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, roller diameter: 190 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness steel (max.): 8 mm, 3-roll bending machine Manufacturer: OSTAS Model: SMR-S Year of manufacture: 2021 Control: PLC Working width: 2050 mm Max. sheet width: 2050 mm Nodpfx Ajxrgigef Eswn Max. sheet thickness (steel): 8 mm Max. prebending: 7 mm Max. opening between top and bottom roll: 100 mm Cone bending device Swing-out top roll Hardened rolls Motorized adjustment of rear rolls Control panel with digital display Electrical schematics

Year of construction: 2001, condition: ready for operation (used), Main Drive Number of axis 4 This 4-axis BLOHM Profimat MT 408 grinding machine was manufactured in 2001. It features a robust grinding spindle motor, PEA table, and efficient drives for the X-axis, Z-axis, and Y-axis. Grinding wheels are included, enhancing its readiness for immediate use. Consider the opportunity to buy this BLOHM Profimat MT 408 grinding machine. Contact us for more information about this machine. Nsdjxrhfcepfx Af Eewn Application Types Grinding

Condition: good (used), Mirus Anleger printing machine, in working order. Nwodpfx Afsud Awve Eon

Condition: used, Year of construction: 2006, Type Scorpion (W/S) Year 2006 In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Nwodexrg Dkjpfx Af Ejn

Condition: used, Double grinding machine METABO Type 730 Serial No. 208158 Grinding wheel diameter: 200 mm Grinding wheel width: 33 mm Motor power: 0.75 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Original stand Required space (L x W x H): 630 x 340 x 1150 mm Weight: approx. 80 kg Njdpfxjxrguis Af Eewn

Condition: used, Year of construction: 2006, operating hours: 67,130 h, Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex Njdpfx Aowbhdasf Eswn The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 100V model in 2006. However, in 2024, the company upgraded it to the 100V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 100V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Consequently, the intuitive interface boosts efficiency while supporting real-time process monitoring.

Condition: ready for operation (used), Year of construction: 1999, This Star SA-12 was manufactured in 1999. It features a workpiece conveyor, 15-degree indexing of the main spindle, and a 3-spindle cross-boring unit. Additionally, it includes a tool presetting probe and a Star SA 16 telescopic tube. Consider the opportunity to buy this Star SA-12 swiss type turning machine. Contact us for more information. Application Types Turning Nwedpfx Afexrhdxo Ejn

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm. Nwodeud Dqkspfx Af Esn

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Nwedpfexrgtxex Af Esn Power connection: 380 Volt, 50 Hz - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Condition: ready for operation (used), Year of construction: 2000, This Star SA-12 swiss type turning machine was manufactured in 2000. It features a workpiece conveyor SA12/16, 15° indexing of the main spindle, a 3-spindle cross-boring unit ER11, and a red signal light. Additionally, it includes an FMB minimag 3200 "A" and a Minimag feed channel. Consider the opportunity to buy this Star SA-12 swiss type turning machine. Contact us for more information. Application Types Nodpfsxrhd Eex Af Eswn Turning

Year of construction: 2019, condition: ready for operation (used), Additional Equipment Chiller / Air Pump / Exhaust Njdoxrhd Sopfx Af Eewn This Trotec Q500 was manufactured in 2019. It features a 120-watt power capacity and a substantial working area of 1300 mm x 900 mm. It includes essential accessories such as a chiller, air pump, and exhaust system. If you are looking to get high-quality cutting capabilities, consider the Trotec Q500 machine we have for sale. Contact us for more information about this machine. Application Types Cutting