Used Reviting Machine for sale (83,573)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available Hedpexzfwbsfx Ag Dofr - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Hsdpfx Agexywupj Dsfr Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Hfedpfxox A Uf Ds Ag Djr Max. bending thickness: 4 mm Max. jaw opening: 100 mm MACHINE DETAILS Weight: approx. 4,300 kg EQUIPMENT Additional tools (as per images) Wiring diagram

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Hfsdpsx Aph Hofx Ag Dsr Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Hedswgkhrjpfx Ag Djfr

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Hfodpev Dpy Nsfx Ag Dsr Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR Hsdpstrd T Tjfx Ag Djfr 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Mold temperature control Automatic activation lamp Hodpsx D Scvjfx Ag Dsfr Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, GF Charmilles EDM FO 550 Sp c/w ATC 16 - 2 units Year 2010 c/w RTC 16 (Robot Tool Change) X-Axis Travel 600mm Y-Axis Travel 400mm Z-Axis Travel 450mm Control Charmilles Touch Hodpfx Agsx Hp Uks Djfr Tool Changer - RTC16 Power Source 64 AMP C-Axis - Yes Chuck System 3R

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Micro 3D L570V, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rotary table diameter: 500 mm, table load: 300 kg, Description General Data Hfodpfx Aovfmbtsg Der Micro 3D L570V is 5-Axis Mold Texture Laser Processing Machine Tool. - Ability to process metal wire drawing, 3D texture, fine texture, leather texture, microstructure, etc. - Laser texture processing accuracy up to 0.01mm - Simplify your process and achieve infinite repeatability Movement X-Axis Movement 700 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Swivel range A: +110 / -110 ° Rotatable C: 360 ° Workbench: Table diameter 500 mm Processing diameter (5 axis) Max. 600mm Processing height (5 axis) Max.350mm Workpiece weight (5 axis) 300 kg Lasers Nanosecond(Optional) ≥ 50W Femtosecond(Optional) ≥ 20W

Condition: used, machine/vehicle number: VS94NTRGSMA86xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Hsdpfxoxm S Ude Ag Dofr Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: new, Year of construction: 2022, New machine Hsdpfx Agjw I Uqxs Dofr Year of manufacture: 2022 The upper section is of heavy cast construction with an integrated three-phase motor, 380 V, 2.2 kW, 2850 rpm. The machine is equipped with a built-in switch-plug combination; motor protection switch and main switch in accordance with VDE regulations. Dimensions of the sanding belt backing: 850 x 150 mm. The steel table height is adjustable via spring pressure. Belt size: 150 x 2280 mm. The sanding belt backing is coated with a graphite glide pad. The machine is delivered with an assortment of sanding belts. Additionally, the scope of delivery includes a mitre and angle guide. When connected to a central extraction system and with a minimum air speed of 20 m/s, the machine is dust-tested (GS) by Holz-BG-Stuttgart. Standard features: - Swivel range 90–180° - Motorized belt oscillation - Small support table at the deflection roller - Pneumatic belt tensioning Technical data: Motor power: 2.2 kW Belt size: 150 x 2280 mm Belt speed: 22 m/sec Table size: 750 x 350 mm Space requirement: 1000 x 800 mm Weight: from 180 kg Extraction connection diameter: 100 & 80 mm Availability: short-term Location: Flörsheim

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 5600 kg Measurements width 1850 mm Measurements depth 3130 mm Control Unit Brand FANUC Main Drive Spindle speed range 3500 Spindle motor power 18.5 / 22 kW Number of axis 2 Hfjdpfx Ajx Hbkweg Djr Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 570 mm Workpiece drm over support 450 mm Tools Number of index 12 Additional Equipment 4 units available This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: - Dowel insertion unit for simultaneous gluing and dowel driving - Dowel supply via maintenance-free vibratory feeders - Fully automatic maintenance-free electronic control with selector switch FLUSH/GLUE/GLUE & DRIVE - Self-contained glue system - 1 stainless steel container, 5 l for glue, and 1 stainless steel container, 5 l for water - Lightweight, easy-to-handle, and recoil-free gun for 8 mm dowels - Capacity: 45 dowels per minute Hfsdpfxsw Rhlho Ag Dsr - Electrical connection: 220 V, 1 Ph, 50 Hz - Compressed air connection: 6 bar - Dimensions: 650 x 650 x 1100 mm - Weight: 110 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6200 kg Main Drive Spindle Speed 6000 RPM Spindle motor power 9 kW Control Unit Hedpfx Ajx D Hgcjg Dsfr Brand SIEMENS Model 840D (NC) This Hanwha STL45D was manufactured in 2011. It features a Siemens 840D control system, with main and sub spindles capable of 6,000 rpm and 5,000 rpm respectively. It supports a max turning diameter of Ø45 mm and includes 12 tool stations on both turrets. Additional features include a chip conveyor, product conveyor, and hydraulic brakes on both spindles. If you are looking to get high quality turning capabilities consider the Hanwha STL45D machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1991, condition: ready for operation (used), General Data Measurements width 6610 mm Measurements depth 11500 mm Measurements height 5170 mm Hfodpfxex D Hi De Ag Dor Machine weight 45800 kg Workpiece Workpiece weight 11000 kg This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information. Application Types Grinding

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2280 Measurements depth 3350 mm Measurements height 2500 mm Machine weight 7200 kg Hfodpfx Aex D Eazjg Dor Main Drive Number of axis 6 Movement X-Axis Movement 510 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm V-Axis Movement 210’ A-Axis Movement HSK 63 swivel angle 360 degree B-Axis Movement +/- 20 degree This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Hfodpfxjx D I Ube Ag Dsr Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand MITSUBISHI Main Drive Hfodpsx H A Svsfx Ag Djr Number of axis 3 This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 1988, condition: ready for operation (used), Control Unit Brand FANUC Hsdpfxex H A Spo Ag Djfr Main Drive Number of axis 2 This NAKAMURA TMC-15 was manufactured in 1988. It's a horizontal turning machine featuring a hollow of 34 mm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA TMC-15 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2004, condition: ready for operation (used), Main Drive Spindle speed range 34000 Spindle motor power 15 kW Number of axis 5 Movement X-Axis Movement 9500 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1000 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 630 mm Z-Axis Rapid Traverse 40 m/min Tools Type of tool holder HSK-63F Media Chip conveyor Yes Additional Equipment 2-zone pendulum operation Angle milling head for bottom-side machining (optional) Automatic length measurement Barcode scanner Label printer Hsdpfox H A Siex Ag Dofr Cycle time monitoring Tool holders, collets, saw blades, tools included eluCad (office software package for production optimization) This 5-axis Elumatec SBZ 150 was manufactured in 2004. It features a CNC profile machining center with a maximum machining length of 9,220 mm and a spindle speed of 34,000 rpm. The machine includes a tool magazine with standard and special tools, and supports 6-sided machining with optional angle head. It's dismantled and ready for delivery. If you are looking to get high-quality milling capabilities consider the Elumatec SBZ 150 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 545 kg Main Drive Spindle speed range 24000 Spindle motor power 4.0 kW Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 600 mm Z-Axis Movement 200 mm Additional Equipment Accessories: Electronic handwheel, Gigabit network switch (5 ports) This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Application Types Hjdpfex H A Nnjx Ag Defr Milling

Year of construction: 2018, condition: ready for operation (used), This AERZEN GM7L was manufactured in the year 2019 in Germany. Hfedjx H A Rlspfx Ag Dor Application Types Other Machine Tools

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 2400 mm Measurements depth 3600 mm Measurements height 1350 mm Machine weight 2150 kg Main Drive Laser power 18,5 KW Laser type CO2 Laser brand ROFIN Laserquelle ScX30 Additional Equipment filter system is included This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW. Application Types Hfedsx H A I Djpfx Ag Djr Cutting

Condition: ready for operation (used), Year of construction: 1976, General Data Measurements width 3500 Measurements depth 2500 mm Measurements height 3600 mm Control Unit Model TNC426 Brand HEIDENHAIN Main Drive Spindle speed range 1600 rpm Spindle motor power 18 kW Tool taper ISA 50 (DIN 2080) Movement X-Axis Movement 1650mm Y-Axis Movement 720mm Z-Axis Movement 800mm W-Axis Movement 200mm Additional Equipment Electric tool clamp Automatic central lubrication Optional: Various milling holders and a few milling cutters Cutter head holder with driver ring Mounting for screw in Hfjdpfsx H A N Uox Ag Der Recordings Holders and long holders for screwing in shingle head CK6 Cutter and knife head holder Round plate milling cutters with holder, Weldon - mounts Collet chucks different sizes // Thread cutting chuck and Alignment mandrel This 3-axis Droop & Rein FS 110 milling machine was manufactured in 1976. It features a robust Heidenhain TNC 426 control, a main spindle power of approximately 18KW at 1600rpm, and a tool holder of ISA 50 (DIN 2080). The machine includes an electric tool clamp and automatic central lubrication. Ideal for precision milling, the Droop & Rein FS 110 machine we have for sale. A lot of additional accessories are included. Contact us for further details regarding this milling machine. Application Types Milling