Used Rema Ds 12 200 for sale (78)

Condition: new, Catalog number: RE066 TECHNICAL DATA - Main blade diameter: ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm): ⌀120/20 mm - Main motor power: 4 kW - Scoring motor power: 0.75 kW - Rotational speed: 4000 rpm - Scoring blade rotational speed: 8800 rpm - Blade tilt: 0 – 45° - Max. cutting length: 3200 mm - Moving table stroke: 3400 mm - Cutting width with parallel guide: 1250 mm - Splitting knife: ⌀350 mm - Parallel fence adjustable to angles of 90° – 45°, accuracy ±1° Hfsdpfeztncqex Accsl - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Upper dust extraction port diameter: ⌀80 mm - Lower dust extraction port diameter: ⌀100 mm - Weight: 650 kg ADVANTAGES – New machine – CE certificate – Warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate. (In case of significant exchange rate fluctuations, the price may change.) Net price: 26000 PLN Net price: 6190 EUR, depending on the exchange rate of 4.20 EUR (Prices may change with higher fluctuations.)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 213, functionality: fully functional, input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, For sale: a professional, Polish-made REMA Fx500 panel saw, manufactured in 2021. The machine is used in the furniture industry and excels at precisely cutting particleboard and MDF panels. The machine is in continuous operation, well-maintained, and regularly serviced. It operates on a single shift, on weekdays from 6:00 AM to 2:00 PM, and is not subjected to multi-shift operation. Key information and technical condition: Hfodpfszvymaox Accel Model: REMA Fx500 Year of manufacture: 2021 Power: 8.5 kW Power supply: 400V (3 phases), 50Hz Scoring saw with a separate 0.75 kW motor Digital display Condition: Very good, fully functional, ready for immediate use Usage history: single-shift operation (Monday to Friday)

Condition: used, respectively Hsdpfsdqgmwox Accefl Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm mounted on a common base

Condition: used, Year of construction: 2009, wheel diameter 300 mm grinding wheel width 50 mm no. of working stations 2 Stück turning speed range - stepless 1.450 / 2.900 U/min voltage 400 V total power requirement 1,6 / 22 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,10 x 0,50 x 1,30 m !!! ATTENTION !!! EXCELLENT CONDITION !!! Hfsdpfx Acezzrc Decel This machine comes from a vocational school! - Serial No.: 090303004

Condition: good (used), REMA DMNE-650/35 RADIAL SAW For sale is a used radial/swing arm saw from the Polish company REMA S.A. from Reszel. Model DMNE-650/35, manufactured in 1998, serial number 346. The machine has a robust cast iron construction and an adjustable arm, allowing for cross cuts and cuts at various angles. TECHNICAL DATA: - manufacturer: REMA S.A. Reszel - model: DMNE-650/35 - serial number: 346 - year of manufacture: 1998 - type: radial/swing arm saw - blade diameter: 350 mm - maximum cutting width: up to 650 mm Hedpsz Alxhsfx Accefl - maximum cutting height: approximately 95 mm - motor power: 2.2 kW - power supply: 380 V - type of current: 3-phase - frequency: 50 Hz - rated current: 5.6 A - spindle speed: approximately 2920 rpm - spindle end diameter: 30 mm - arm adjustment in the vertical plane: ±90° - carriage adjustment in the horizontal plane: ±90° - carriage adjustment in the vertical plane: ±90° The machine is equipped with a 3-phase electric motor and control with an on/off button. The arm can be moved and adjusted relative to the table, allowing for various types of cuts. CONDITION: The machine is used and shows visible signs of wear. The visual condition is shown in the photos. Sold exactly in the condition and configuration shown in the photos. The machine can be inspected on-site before purchase.

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm Hedoztavijpfx Accofl - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm Hfjdpfx Acsfv Hphscsl weight ~ 320 kg

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Hfedehaf Ndopfx Accsl Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg - immediately available -

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Hfedpszxr R Njfx Accsl

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Hedpeb A Rbgjfx Accsfl -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with main blade ⌀300, 350 mm) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of scoring saw 8800 rpm Blade tilt 0 - 45° Max. cutting length 1500 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set to an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg Hodpfezx Dumox Accefl

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. Hsdpfx Acszf H Hrocofl External reference: 8572

Condition: excellent (used), CATALOGUE NUMBER 8018 Hfedpfjztqv Hjx Accsl TECHNICAL DATA - max. blade diameter 400mm - blade bore diameter 30mm - blade guard - adjustable arm (up/down) - max. cutting height 100mm - max. cutting width 540mm - hydraulic blade feed - 2 infeed rollers on the table - outfeed roller on the table - motor 3.7kW - hydraulic pump motor approx. 0.55kW - diameter of dust extraction port 100mm - roller width 530mm - dimensions of the infeed roller table 2000x640x910mm - dimensions of the outfeed roller table with scale 2000x640x965mm - machine dimensions (L/W/H) 1900x1540x1820mm - weight approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – DTR documentation (Technical Documentation) – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. Hsdpfx Acozvbldjcefl The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Classifier was manufactured in 2005 but was never installed. Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Hfsdpfxjzvgkle Accol Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS Hsdpozrk N Refx Accofl - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg Hfjdpfxozum Dij Accjl ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm Hodpfx Aeztavveccofl - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalog number: 7938 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm Hsdpfszrxgdsx Accsfl - top pneumatic pressure - blade guard - pneumatic blade extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 7.5kW - dust extraction nozzle diameter: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table height: 900mm - roller table width: 510mm - overall machine dimensions (length/width/height, without table): 1200x640x1280mm - weight approximately 500kg ADVANTAGES - Made in Poland - Original DTR documentation - 2 roller tables - Pneumatic blade adjustment - Used saw, very good condition Net price: 14500 PLN Net price: 3455 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg Hfodpfxozrnt He Accel ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with ⌀300, 350 mm main blade) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring saw 8800 rpm Blade tilt 0 - 45° Max. cutting length 2500 mm Hedpfx Aozx Du Tsccjfl Moving table stroke 3400 mm Cutting width with the longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set at an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm - blade guard - height-adjustable arm - max cutting height: 120 mm Hfedpfxsztq Nte Accel - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW - extraction port diameter: 110 mm - roller width: 530 mm - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Condition: ready for operation (used), Rema-4-Station Grinding Machine Hsdpfjztdzpsx Accjfl -Angle adjustable -Tilt adjustable -Oscillating -Cooling system -Work light Dimensions: L x W x H 1.5 x 1.5 x 1.5 meters / Weight 450 kg Errors and omissions excepted.

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Hfsdpfxezryuvo Accjl - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: like new (used), Year of construction: 1999, Manufacturer REMA Model / machine type DMRT 300 Year of production 1999 Machine category Crosscut Saw Location: Gorzów Wlkp. Delivery terms: Personal pickup Hedpfxoxn A N Ue Accsfl