Used Reduce for sale (3,306)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 2,900 mm, total height: 1,500 mm, total width: 1,600 mm, type of input current: three-phase, For sale is a Maqford BEA2 forming machine. Working length 150-1500mm, sheet thickness max. 2.0mm, pipe diameter 120-600mm. Including a set of packages for individual diameters. Fsdpfswmniasx Albjgg

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically:  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Fedpewa Tnzjfx Albsgg Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm Fodezlz Svopfx Albsgg • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 22,000 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Fedpey N Ahcsfx Albogg Benefits of FoamMelt Technology Faster Curing: The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. Fodpfxjzzpb Rj Albsgg - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: used, mileage: 285,650 km, power: 260 kW (353.50 HP), first registration: 10/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 48 m³, loading space length: 8,550 mm, loading space width: 2,500 mm, loading space height: 2,230 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), ANTOS 2535 L refrigerated box body, 8.45 m, with roll-up door + tail lift, 2 tons. * CARRIER ICELAND 18, refrigeration unit for driving and stationary operation, 380 V, electric * 21 pallet spaces with adjustable and foldable partition * ORIGINAL mileage approx. 285,650 km * Vehicle number for customer inquiries: 4824 * Engine version Euro VI, version 2 * Tag axle, 7.5 t, steered, load-reducing, liftable * Distance control assistant * Differential lock, rear axle * Air conditioning * Lane keeping assist * Environmental badge (green) * Active Brake Assist 3 * Trailer coupling, standard, D40, Rockinger * Attention assist * High Performance Engine Brake * Air suspension, rear axle * Wheel formula 6x2 ENA * Maintained according to service schedule * Stability control assistant (ESP) * Airbag, driver * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pole * Antos * Electronic braking system with ABS and ASR * Driver's comfort suspension seat * Gearbox G 211-12/14.93-1.0 * Weight variant 26.0 t (8.0/11.5/7.5) Fjdpszz Dpiefx Albogg * Comfort locking system * Mercedes PowerShift 3 * Tank 290 l, right, 650 x 565 x 950 mm, aluminum * Cruise control * Two-seater * Storage compartment, high, on engine tunnel * AdBlue tank 60 l, left * Starting assist, speed limitation 30 km/h * Roof hatch/ventilation flap, roof * Heater, electronic compressed air supply unit * Engine OM936, R6, 7.7 l, 260 kW (354 hp), 1400 Nm * Wheelbase 5200 mm * Tires tubeless, 315/70 R 22.5, rear axle * Tires tubeless, 315/70 R 22.5, front axle/front lift axle/rear lift axle * S-cab ClassicSpace, 2.30 m, tunnel 320 mm * Rear cross member, reinforced * Stabilizer, front axle * Preparation for toll collection * Engine PTO, rear, hydraulic pump ISO 7653D * Tachograph digital, EU, speed, ADR No liability for printing and spelling errors Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We would be happy to provide you with a LEASING/FINANCING/RENT-TO-OWN offer * Guarantee insurance possible upon request with the insurer * TÜV / UVV tail lift inspection / tachograph test and installation of OBU device by our partners on site * Customs license plate for 30 days * All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Baden-Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Fgodpfjzqvhvsx Albeg

Condition: excellent (used), functionality: fully functional, overall weight: 24,000 kg, Year of construction: 2022, operating hours: 3,092 h, Gasparin GI5000R – Mobile screening plant on a tracked chassis Performance features Production capacity: approx. 400 t/h Hydraulically tilting screening box 93 kW (126 hp) 4-cylinder diesel engine, emission stage V Robust heavy-duty construction: Only the screening box vibrates, not the chassis or the conveyor belts Proportional valve with load-sensing system to optimize hydraulics and reduce fuel consumption by approx. 30% Easy loading onto a low-bed trailer thanks to the favorable chassis angle of 16° Technical data Screening unit Double-deck vibrating screen Vibrating screen with two decks Screen area: 4,000 x 1,400 mm Feed area Feed hopper: 6 m³ Folding side walls Fgodpfxszbrclj Albjg Conveyor belts Feed conveyor belt: 1,200 x 3,500 mm, adjustable speed Overflow conveyor belt: 1,200 x 5,000 mm, hydraulically folding, adjustable speed Discharge height: 3,420 mm Collection conveyor belt: 1,200 x 3,300 mm Conveyor belt for medium grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,530 mm Conveyor belt for fine grain: 800 x 7,700 mm Hydraulically folding Discharge height: 3,680 mm Drive 4-cylinder diesel engine with constant speed Power: 126 hp / 93 kW Emission standard: Stage V Further technical data Maximum feed particle size: 600 mm Operation via control panel Tracked chassis: 400 x 2,920 mm Operating weight: 24,000 kg Transport dimensions Transport length (with folded overflow conveyor belt): 11,730 mm Transport width: 2,550 mm Transport height: 3,200 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, VEMAG HP20E + LPG209 + AH212 | Sausage filling, linking and hanging line Vacuum filler with integrated butcher's lift: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP20E Serial number: 1631079 Year of manufacture: 2017 Power supply: 480 V, 38 A, 3 Ph, 50/60 Hz Weight: 1400 kg Dimensions: 1800 x 1500 x 2000 mm Equipment: Integrated vacuum pump, mast-type loading lift for standard butcher's trolleys (carts) with a capacity of 200 liters Automatic linker: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: LPG209 Linker Serial number: 2090310 Year of manufacture: 2017 Power supply: 400 / 460 V, 18 A Power: 5.5 kW Working air pressure: 6 bar Weight: 657 kg Dimensions: 1700 x 1100 x 1600 mm Fjdpfx Aszhgykolbogg Hanging line (automatic hanger): Manufacturer: VEMAG Maschinenbau GmbH Model / Type: AH212 Hanging Machine Serial number: 2120577 Year of manufacture: 2017 Power supply: 400 - 460 V, 3 Ph, 50/60 Hz Power: 0.5 kW Weight: 298 kg Dimensions: 4000 x 800 x 1500 mm Vemag is the undisputed global leader in portioning technology, and the presented set is a fully automated industrial line designed for the mass production of sausages, frankfurters and other products in natural, collagen and artificial casings. The heart of the set is the reliable Vemag HP20E vacuum filler, based on a proven system of conveying screws. The machine guarantees extremely gentle handling of the filling, eliminating smearing of fat and the formation of air bubbles inside the product. The integrated mast lift for 200 l trolleys drastically reduces downtime, ensuring a smooth supply of raw material to the hopper. The second key element of the line is the technically advanced Vemag LPG209 linker. This device eliminates the traditional bottleneck in meat production – it automatically and with surgical precision portions and links the sausages, maintaining the identical weight and length of each section. Thanks to its unique gripper system, the linker minimizes casing breakage even at extremely high operating speeds, which translates into real savings of raw materials. The final link in the system is the Vemag AH212 automatic hanger. It picks up the formed portions directly from the linker, arranges them in perfect loops and precisely hangs them on the transport hooks of the hanging line. These prepared batches of product are immediately ready to be manually or automatically transferred to smoking sticks. The entire set is fully synchronized electronically, creating a monolithic production unit managed from a single level, ideal for medium and large meat processing plants, butcher shops and industrial-scale slaughterhouses.

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 Fgsdpfxezvy D Eo Albsg 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: a complete iGolden 02P-WVQ 4-axis nesting CNC production line from 2023, designed for automated cabinet and furniture production. The installation consists of four interconnected components that together form a continuous production line: 1. Automatic sheet lift 2. Automatic labeling machine 3. 4-axis CNC nesting machine 4. Automatic unloading and output table The line automates the loading, labeling, processing, and unloading of sheet material. This reduces manual handling and allows for the creation of an efficient and streamlined production flow. Included in the delivery: - Dust extraction system - Vacuum pump for the CNC bed - ISO30/ER32 tool holder - Haixun Quick Design 3D cabinet software - Haixun Quick Production production software - Spare parts - Stock of labels Dimensions: - Control cabinet: approximately 80 × 60 × 190 cm Fedpfev Dupvox Albjgg - Dust extraction system: approximately 140 × 80 × 140 cm - Labeling machine: approximately 4,000 × 2,700 × 1,800 mm A complete solution for companies that want to automate sheet metal processing and cabinet production, from sheet input and labeling to CNC machining and output.

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: Fsdpjyyz Ebefx Albsgg - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: used, functionality: fully functional, SCM F410 Planer/Thicknesser Specifications: • Condition – used, inspected • Manufacturer – SCM • Model – F410 • Working width – 410 mm • Bed length – 2610 mm • Adjustable infeed table angle • Motor power – 3.0 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max. removal depth – 8 mm • Noise-reducing combs near the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • 0-1 start • Weight – approx. 650 kg • Overall dimensions: 261 x 85 x 105 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual condition of the item • Possibility to turn on and test the machine on-site Fgjdpfjzd Stbjx Albjg • Free training on machine operation (at our company premises) • The price listed in the auction does not include VAT and transport costs Financing and transport: • We organize transport using MDD’s fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing financing

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. Fjdpfszt Ai Esx Albsgg All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: Fedozvhlkopfx Albogg The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: TAG ARTENA-03722-1/11, The TAG Artena 16-channel Weighing and Filling Machine is a fully automated, multi-product weigher designed for accurately portioning delicate small- and medium-sized loose fruit and vegetable products into trays. This machine is integrated at the upstream end of the production line, positioned before the packing and labelling machines. Products are loaded in bulk onto the weighing machine's conveyor belt, then directed onto the feed conveyors via a dynamic hopper and placed into trays. Trays are destacked and sorted onto the indexed conveyor. The filling process occurs in four steps, during which the trays are weighed in-line using patented technology. The machine is controlled via a touch-screen control panel, providing a comprehensive overview of its functions. Key product and machine performance specifications: • Weighing and filling system for delicate fruits • Feeding belts made from special soft material to prevent bruising of stone fruit • 8+8 multi-product weighing units • Enhanced product shelf-life due to reduced drop heights • Linear combination and/or counting operation logic • Three-way automatic dual tray/basket destacker Fgsdoykam Dopfx Albeg • Multi-format, double-lane automatic tray/basket conveyor • Tray weight: from 300 grams up to 1,500 grams • Tray size: from 65x65xh25 mm to 200x200xh110 mm • Tray shapes: square, rectangular or round • Multi-material trays: plastic, plastic-free, cardboard, and other materials • Easy touch-screen control • User-friendly interface, ready for in-line connections • Automatic format changeover • Production statistics • Electrical connections for downstream machine synchronization • Button-operated clam-shell closing device • Two-to-one channel converger conveyor Main construction features: • Stainless steel frame • Sorting belt with support surface for crate tipping • 2 product feed elevator belts • 8+8 multi-product weighing units (patented system) • Clam-shell closing device • Automatic multi-format tray destacker • Food-grade PU motorized conveyor belts • Tray diverters • Synchronized step-by-step belt movement using sensors and microcontrollers • Belt function logic managed by TAG dedicated microcontroller and software • Electrical connections for synchronization with downstream machines (flowpack or other) • Power supply: 220V 50Hz, 2.5kW consumption • Compressed air circuit, minimum pressure 7 bar • Hardwired internet connection for remote support All line command and control functions are managed via a tablet supplied with the machine, serving as the HMI and onboard operator panel. The intuitive 3D graphic interface and 10'' touch-screen make the operation highly user-friendly.

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. Fedjzn N Ecspfx Albegg • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, Fgodpfxozw T Sxj Albsg * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, total length: 1,290 mm, total height: 1,980 mm, total width: 900 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 240 V, input current: 40 A, temperature: 160 °C, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, positioning accuracy: 0.127 mm, electrical fuse: 40 A, repeat accuracy: 0.05 mm, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, space requirement length: 2,000 mm, space requirement height: 2,200 mm, noise level: 65 dB, space requirement width: 1,500 mm, High-performance industrial 3D printer based on FDM technology, designed for functional prototyping and low-volume production using certified engineering thermoplastics. The Stratasys Fortus 450mc is a proven platform for companies requiring repeatability, dimensional stability, and material traceability, making it suitable for automotive, aerospace, industrial equipment, and advanced R&D environments. The system is configured with dual extrusion heads in open material mode, enabling advanced process flexibility and compatibility with a broader range of FDM-grade thermoplastics, subject to parameter optimization and the thermal constraints of the platform. Key Features: - Heated build chamber (up to ~180°C) for superior layer adhesion and reduced warping - Industrial-grade repeatability for functional and end-use parts - Large build volume: 406 × 355 × 406 mm - Dual extrusion system (model + soluble support) - Closed material system for process stability and consistency - Compatible with Insight software for advanced process control Supported Materials: 🔹 Standard & Functional Polymers ABS-M30 → robust functional prototyping ASA → UV-resistant outdoor applications ABS-ESD7 → electrostatic dissipative components 🔹 High-Performance Polymers Fgsdpfey Ug Ecex Albeg PC (Polycarbonate) → high impact resistance PC-ABS → balance between toughness and processability 🔹 Advanced Engineering Materials Nylon 12 (PA12) → wear resistance and fatigue durability Nylon 12CF (carbon fiber reinforced) → increased stiffness and dimensional stability 🔹 Aerospace-Grade Thermoplastics ULTEM 9085 → FST compliant (flame, smoke, toxicity) ULTEM 1010 → maximum thermal resistance and mechanical strength

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. Fgsdpozimqrsfx Albeg !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC Fsdpfx Alsyzg Udjbegg - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Fjdex Dmgijpfx Albegg Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 13137, Capacity: approx. 50-56 kg/h (depending on the dough, filling, etc.) Overhaul year: 2026 – new electronics, housings, insulation, gas reducer, all bearings + motors are new or refurbished. Model: EWB 2/2 Two dough belts. Set including a dough tank and pumps – stepless speed control via a frequency inverter. Fodpfxjzwmz Ho Albogg Power source: CNG/LPG 50 Hz, power: 5.3 kW

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, Lamella Production Machine The automatic acoustic panel stapler is equipped with an advanced three-axis NC control system, providing exceptional precision and flexibility in the manufacturing process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Stapler Positioning Along the Horizontal Axis - The X-axis ensures accurate horizontal positioning of the staplers along the panel. This guarantees that staples are precisely applied at designated points, ensuring consistent stitching quality across the entire length of the panel, regardless of its size. 2. Y-Axis: Vertical Movement - The Y-axis allows vertical movement of the stapler, enabling stapling at various locations on the panel, regardless of its dimensions or shape. This enables the stapler to work with non-standard sized panels while maintaining full accuracy. 3. Z-Axis: Depth and Stapling Force Control - The Z-axis controls the depth and force with which the staples are driven into the panel. This allows the process to be precisely adjusted according to the thickness and hardness of the acoustic panel material. As a result, staples are embedded with optimal strength, ensuring the durability and aesthetics of the finished product while minimizing the risk of material damage. ### Automatic Changeover Automatic changeover is a key feature that significantly enhances production efficiency. With this function: - Changeover of the X, Y, and Z axes is fully automatic. ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Manufacturing Process: - Thanks to MES and ERP integration, every stage of production can be fully monitored and managed. 2. Optimization of Media and Material Consumption: 3. Optimization of Production Plans: ### Significant Relief for Operators Automation of the acoustic panel stapling process directly reduces manual workload: - Elimination of manual control requirements - Increased work efficiency ### Capability to Develop Algorithms for Media Demand Analysis Thanks to advanced integration with manufacturing management systems, the stapler allows for the creation of sophisticated algorithms to analyze production media demand: 1. Media Demand Analysis: 2. Adapting Production to Variable Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also facilitates advanced OEE analysis, a key performance indicator in production operations: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: Fsdpfx Aoy Sw I Nslbogg - The MES system automatically calculates the OEE value based on collected data, allowing immediate assessment of the stapler’s operational efficiency. This tool enables rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or machine performance enhancement. 3. Early Detection of Problematic Areas: 4. Optimization of Production Plans: ### TPM (Total Productive Maintenance) and Automated Condition Monitoring The stapler also supports the implementation of TPM philosophy, focusing on maximizing machine efficiency and reliability...

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Fedoyy Sr Sspfx Albsgg Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan