Used Recoiler Mandrel for sale (426)

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm Ijdpfxsx T Dgue Ah Noht The accessory package is valued at approximately €150,000.

Condition: used, Year of construction: 2011, Technical details: tube diameter: 60 mm wall strength: 3,0 mm bending radius min.: 20 mm tube diameter max.: 60 mm wall thickness max.: 3,0 mm tube pipe draw up length: 1500 mm bending angle max.: 180 + Auffederung ° Number of working hours: ca. 34 797 h Total power requirement: 55 kW Weight approx.: 8,0 t machine dimensions LxWxH: 6,3 x 3,3 x 1,9 m dimensions electric cabinet LxWxH: 2,7 x 0,7 x 2,0 m dimension device 1: Steuerpult: 0,9 x 0,6 x 1,85 m dimension device 2: Rohrmagazin: 1,8 x 2,4 x 1,75 m This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø : 16mm max. capacity of machine Tube Ø x wall thickness: mild steel=Ø 60x3 mm and stainless steel=Ø 57x2 mm Bending radius to pipe center: min. Ø 20 mm max. Ø 200 mm Bending to left. Ihodpfsx Sll Ajx Ah Not max. tensile strength of the material to be bent: Stainless steel 750 N/mm² mild steel 450 N/mm² max. bending speed: FORWARD, infinitely variable / programmable 22.0 1/min. RETURN, constant 22,0 1/min. Height adjustment multiple radii: lowest tube center 55 mm Height travel suitable for 3-groove bending tools Twisting: Twisting angle max. 360°; speed 50 min-1 -gripper -tube magazine Schwarze-Robitec, tube length min./max.: 400 7 1500 mm, tube outer Ø min./max.: 28 7 60 mm -Hydraulic filling volume 340 liters -Hydraulic operation for: bending table drive; tool clamping; slide rail pressure, direct acting; reinforced slide rail feed and return; mandrel return feed device -operator/control panel from Schwarze Robitec -2x foot contact operation -cooling unit on control cabinet Rital, type SK 3361100 accessories: div. bending tools for Ø 60 mm tube div. auxiliary tools *

Condition: good (used), Year of construction: 2015, functionality: fully functional, SPC measuring device / remeasurement station for measuring diameters and cylindrical form Isdjwxb Sfjpfx Ah Nsht Measuring device, manual measuring station, testing device, test station Measuring computer QDS-Base, manufacturer KOMEG Manufacturer: Hafner Fertigungsmesstechnik Philipp Hafner GmbH & Co. KG 3 levels, each with 3 probes Measurement with pneumatic jet measuring mandrel in 3 levels, each level with one pair of nozzles Measuring computer QDS-Base, make KOMEG incl. measurement software, Profibus, interface, monitor, and keyboard Temperature compensation "Price / details on request". All technical data subject to typing errors or mistakes. We sell exclusively only to countries of the European Union.

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. Ihjdpfxjd Skg Rj Ah Not On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Ihjdpfx Aox R R Exsh Njt Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck Ihodpfx Ahjwu R Eye Njt -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 100 x 225 mm -Weight: 2 kg

Condition: new, Year of construction: 2025, Electric pipe bending machine without mandrel. Accurate and efficient machine for bending steel, copper, aluminum and brass pipes. The possibility of selecting the optimal bending radius allows for obtaining high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use. Standard equipment digital reading of bending angle The BENDMASTER 40A machine is equipped with dies for pipes with a diameter of: 16; 20; 25; 32; 38 mm Technical data MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED WHEN BENDING 5 rpm MAIN MOTOR POWER 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE 720 x 500 x 1030 mm Ihsdpfjvugx Djx Ah Not WEIGHT 330 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 Iodpox Dzfaofx Ah Nsht I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: like new (used), functionality: fully functional, total length: 123 mm, clamping range: 40 mm, 2 x Schunk DSF FH40 for Reishauer grinding machine RZ150 / RZ160 Workholding devices, as-new condition, used Low-profile chuck / base chuck / hydraulic expanding mandrel Clamping diameter: 40.00 mm Active clamping length: 40 mm Ihsdpfxswzkhne Ah Net Total length: 123 mm Balanced for n max. = 3,000 rpm Base chuck with stroke monitoring and through-hole for air system monitoring / hydraulic auxiliary function from our inventory Price / details on request. All technical data subject to typographical errors/mistakes. We exclusively sell to countries of the European Community.

Condition: used, Technical details: weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Iedpfx Ahju Nkw Rj Nsht Mandrel square 28 x 28mm *

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Ihedpfoxuii Uox Ah Net Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Tube bending software Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder Ihjdjvmxcrepfx Ah Njt -Type: SK40 x 32 x 510 -Shaft: Ø 32 mm -Dimensions: Ø 75 x 670 mm -Weight: 7,4 kg

Condition: new, Year of construction: 2025, A mobile platform for transporting machines and heavy goods weighing up to 2000 kg. They have polyurethane rollers that prevent damage to the floor in the place of transport. Transport rollers enable easy and safe transport of heavy items. Thanks to the use of rollers with polyurethane tread, the transported machine and the floor are not damaged. The platform has a foldable drawbar. Technical parameters ROLL SIZE Ø80x70 mm Isdpfx Asvxrh Ejh Nsht NUMBER OF ROLLS 5 LOADING AMOUNT 107 mm BEARING SURFACE ON THE ELEMENT Ø175 mm SUPPORT POINTS 1 DRAWBAR LENGTH 920 mm PLATFORM WIDTH 500 mm WEIGHT 38 kg Manufacturer: Cormak

Year of construction: 2003, condition: excellent (used), functionality: fully functional, strip width: max. 1.500 mm strip thickness: 0,5 - 2 mm coil weight: max. 7 t mandrel Ø: 508 mm Iodpfx Aerazyqjh Nsht

Condition: used, Year of construction: 2021, - Round pipe steel 6 – 42 x 5 mm - Round pipe stainless steel 6 – 42 x 3 mm - Maximum pipe feed length: 6,096 mm - Programmable PLC control for up to 20 angles - Digital display for length displacement - Digital display for rotation - Programmable, pre-emptive mandrel retraction - Mandrel lubrication system via hand pump - Wrinkle-smoothing mandrel holder - Maximum bending speed 13°/sec - Bending angle up to 180° + 10° overbending - Manual feed - Manual rotation - Right-hand bending direction Ihedpfx Aox R R I Tjh Net - Radii from 1.5 D - Includes existing bending tools

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Ihsdpevbhv Rjfx Ah Net Inverter FRENIC 5000G11 i.D. *

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Iodpfxevk Scge Ah Neht Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm Ihsdevmxvxjpfx Ah Nst -Weight: 5.9 kg

Condition: new, Year of construction: 2025, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small to medium-sized repair and production departments. This medium-sized machine not only offers an auto-feed with vertical head, but also threading functions and digital readout as standard. Product characteristics standard readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy Stable Cast Iron: The solid construction in heavy cast iron is the foundation for durability and precision. The ZX 7055 DRO milling/drilling machine maintains stability even during the most demanding tasks. Automatic feed: Save time and increase productivity with the automatic feed. The motorised vertical head allows efficient machining of materials without the need for constant supervision. Ihsdpfsud H Thex Ah Net Solid Cross Table with Precision Ground Surface: Attention to detail is a key element of the design. The solid cross table with a precision-ground surface ensures excellent flatness, which will translate into precise machining. Swallow Tail Slides: Innovative dovetail-shaped guides guarantee smooth and precise movement in three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Focus on the work, not the noise. The ground gears make the router-drill run quietly for a comfortable working environment. Left and Right Rotation: Adapt the machine to your needs. The ability to rotate both ways gives you extra flexibility in the machining process. Head Rotation +/- 90° and Adjustable Head Height: Adapt to different tasks with +/- 90° head rotation and adjustable head height. Achieve precise results in all conditions. The ZX 7055 DRO milling/drilling machine is a state-of-the-art tool that will redefine your material processing experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILLING CUTTER DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD ROTATION ANGLE +/- 90° SPINDLE ROTATION 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEED RATES 0,1; 0,18; 0,26 rpm MANDREL HANDLE MK4 SPINDLE PITCH 125 mm (automatic feed) WORKING TABLE DIMENSIONS 1000 x 240 mm TRAVERSE TABLE X/Y 670 x 185 mm WIDTH/SPACING/NUMBER OF T-SLOTS 18 mm/80 mm/3 DISTANCE FROM SPINDLE TO TABLE 90 - 460 mm DISTANCE FROM SPINDLE TO COLUMN 235 mm MOTOR POWER 1,5 kW / 2,1 hp POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard equipment spindle auto-feed digital readout longitudinal auto-feed of table with speed adjustment height adjustment of headstock with electric motor cooling system

Condition: used, Year of construction: 1993, Technical details: Ijdou Ibyyepfx Ah Neht tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: new, Year of construction: 2026, For sawing, milling, planing/thickness planing and optional slot drilling in confined spaces High-precision format sliding carriage made of anodized aluminum, various lengths Large extension arm (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional fence flaps Max. Saw blade Ø 315 mm, tiltable from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° backwards Four milling speeds up to 10000 min-¹, manually adjustable With right-left rotation of the milling spindle Heavily ribbed dressing tables made of stress-free gray cast iron for decades of stability and flatness 2-stage feed for thickness planing Three independent industrial motors for continuous operation With lockable main switch, motor protection switch Fixed hand wheels Dimensions and weights Weight (net) approx. 857kg Dressing table Dressing table width 410mm Dressing table length 2000mm chip removal max. dressing 5mm Connection suction Suction port diameter 3 x 120mm Suction port diameter saw blade guard 60mm Installation information Required space length 5960mm Space requirement width/depth 5140mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths. Working area length 1600mm Working area width/depth 1600mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Thickness Thickness table length 757mm Thickness table width 423mm Working height thickness min. 3mm Working height thickness max. 230mm Chip removal max. thickness 5mm Electrical data Supply voltage 400V Mains frequency 50Hz Rated operating mode drive motor S6 Duty cycle drive motor 40% Ihedpfsih Dxlox Ah Njt Power drive motor 3 x 5,0kW Sliding carriage and table sliding table length 2660mm Format sliding carriage width 360mm format sliding carriage height 142mm table length 1250mm table width 430mm table height 900mm Milling spindle spindle inclination 0 - -45 spindle mandrel diameter 30mm useful length of spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min⁻¹ Milling tool diameter max. Tool diameter max. lowerable 210mm tool diameter max. lowerable 45° 150mm tool diameter max. tenon milling 275mm Planer cutterhead Type of cutterblock TERSA planing shaft diameter 87mm Number of planing knives 4pcs planing shaft speed 5200min-¹ Circular saw unit trimming length 2600mm Cutting width with rip fence 900mm Max. Cutting width left of saw blade 3260mm saw blade inclination 90 - 45 Max. Cutting height at 90° 90mm Max. Cutting height at 45° 63mm Max. Saw blade projection 90° 100mm Max. saw blade Saw blade projection 45° 71mm Diameter (main) saw blade 315mm Explanation Diameter (main) saw blade with scoring device Speed (main) saw blade 4000min-¹ Feed rate Feed speed 6 - 12m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 Ihjdpfjxrlvlox Ah Nst -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg

Condition: new, Year of construction: 2025, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Iedpfx Ahji D Da Ao Nsht Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), tool holder, milling holder, milling tool, adapter, Weldon -Milling holder: test mandrel -Type: SK40 / Ø 60 mm Iedpfxeu Tlgfs Ah Njht -Dimensions: Ø 60 x 1000 mm -Weight: 20.2 kg

Condition: new, Year of construction: 2025, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm Iedpeud H H Uofx Ah Njht PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual