Used Recooler for sale (42)

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h Nodpfx Ajr Ezdrshvscp electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: ready for operation (used), Year of construction: 2021, Aermec ANL 202 Q Chilled Water Recooler Approximate dimensions: 1750mm x 750mm x 1450mm (W x D x H) Weight: approx. 450 kg Cooling capacity: 43.00 kW Year of manufacture: 2021 You are welcome to arrange a viewing appointment. Ncsdpfoywtpmox Ahvep We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Please note that technical specifications may vary and errors in the item description cannot be ruled out and are subject to change.

Condition: used, Cooling unit, cooling water chiller, water cooler, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity approx. 6 kW Nominal power of cooling unit: 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Ncedpfx Ahjpu R Ncjvop Circulation pump flow rate: 40 liters/min Pump power: 0.63 kW Water connections: 1/2 inch Power supply: 380 volts, 50 Hz - Temperature adjustment via rotary potentiometer Space requirements: L x W x H 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Cooling capacity 3500 watts Ncjdpfx Ajvw A T Njhvop Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: good (used), Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Technical data Rated voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal output: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse protection: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Flow: Flange SDIN2633 DIN100 PN16 Return flow: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2” female thread Inlet well water: 2” female thread Well water drain: 2” female thread Adiabatic inlet: 3/4” female thread Filling: manual 3/4” female thread Water circuit Njdpfjuzhcuex Ahvscp Heat transfer medium: Water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooler circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer circuit Pump type: (pressure booster system) Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 20-foot AIS-DSC-22-28 External dimensions mm (LxWxH) 6,058 x 2,438 x 2,591 Internal dimensions mm (LxWxH) 5,898 x 2,352 x 2,390 Internal floor area m2: 13.88 Control 2000 ME compact control unit Compact microprocessor control unit for infinitely variable control and cascade control of pumps with MGE motor with integrated frequency converter for demand-dependent, energy-optimized operation of multi-pump systems. With automatic activation and deactivation of the individual speed-controlled pumps by a digital controller adapted to centrifugal pumps. Grundfos R100 infrared manual control and diagnostic device for commissioning, data monitoring, reading out fault messages and configuring Grundfos pumps. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Ncodpfxsx Sywao Ahvjp

Year of construction: 2002, condition: used, GENERAL Year of manufacture: 2002 Remarks: 3 feet made of V2A with plastic rollers; 2 crane lugs Outside diameter: 520 mm Total height: 1,950 mm Insulation: present Location: Bremen Nodpexqcmxefx Ahvecp Nameplate: Condition: used JACKET SPACE Jacket volume: 216 liters TUBE SPACE Tube space volume: 1,000 liters Max. permissible operating temperature jacket: 80 °C Max. permissible operating temperature tube space: 80 °C

Year of construction: 1995, condition: used, GENERAL Heat exchange surface: 4.8 m² Year of manufacture: 1995 Remarks: One cooler does not have a nameplate. The coolers have different connections. Insulation: available Location: Bremen Nameplate: Ncjdpfx Ahexqcmlevsp Condition: used SHELL SIDE Shell side volume: 210 liters TUBE SIDE Tube side volume: 60 liters

Condition: excellent (used), Water cooler with refrigeration compressor Make DALEX TYPE ES 1 cooling capacity 870 W Njdpfeva Eawex Ahvjcp with connection cable and mains plug for 230 V 50 Hz connection suitable for resistance welders up to 40 kVA rated power

Condition: good (used), Year of construction: 2018, weight 582 kg operating pressure 16,0 bar capacity 36,0 l/min viscosity VG10 voltage 400/50 V/50 control voltage 24 VDC Continuous flow recooling unit - Cooling capacity 9.0 kW at 40° ambient temperature - Permissible ambient temperature: +10°C to +40°C - Pressure loss: 0.5 bar - Refrigerant type: R134a - Refrigerant charge weight: 2.1 kg - Permissible operating pressure: 24 bar - Total electrical connection: 3.19/11.81 kW/A Ncedpfxsx Urpge Ahvep - Continuous sound pressure level: 75 dB

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Ncsdpfjywxbnex Ahvep Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min Nodpeynhu Defx Ahvscp • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Nodpfx Aheyrddvjvocp Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 053-497, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Machining Center Manufacturer: Werkzeugmaschinenfabrik Vogtland GmbH Model: HPC FLEX-V100 (Special Machine) Year of manufacture: 2005 Serial number: 053-497 CNC special machining center of type HPC FLEX-V100 from Werkzeugmaschinenfabrik Vogtland. The system is designed as a single-spindle machining module featuring both horizontal and vertical machining capabilities, and is equipped with an automatic pallet changer. It was specifically developed for processing rolling bearing cages. The machining unit is based on a combination of two NC rotary tables (A and B axis), allowing for various machining positions and indexing angles. Using this 2-axis combination, a pallet with clamping fixture is swiveled from the loading position to the machining position. Loading is performed by an automatic pallet changer with a separate pallet infeed station. Direct loading within the machining area is not structurally provided. The system comes with extensive peripherals, including a coolant system with high-pressure unit, chip conveyor, hydraulic power unit, recooling system, centralized lubrication, as well as oil and emulsion mist extraction. The machine is controlled via Siemens SINUMERIK 840D. Used industrial special machine from a production environment. The system is fully assembled and equipped with comprehensive peripherals. Cosmetically in line with age and previous use, showing the usual wear in the working area. Inspection of the machine possible by appointment. Dismantling, loading, and transport to be carried out by the buyer. Machine Specifications • Installation dimensions (L × W × H): approx. 14,900 × 8,100 × 4,800 mm • Total weight: approx. 85 t • Maximum transport unit: approx. 18 t • Number of machining stations: 1 • Machining performance: approx. 1 workpiece/hour (depending on type) Machining Details • Workpieces: various rolling bearing cages • Material: CuZn40Pb2 • Operations: drilling, tapping, milling, facing, brushing Workpiece Clamping • Manufacturer: RAKO GmbH • Type: 12-jaw chuck • Operation: manual with power tool • Pallet size: 1250 × 1250 mm Controls and Drives • CNC control: Siemens SINUMERIK 840D • System control: Siemens S7 • NC axis drives: Siemens 1FT6 • Main spindle: KESSLER DMS132.AL.4.FFS • Drive controller: Siemens SIMODRIVE 611D Ncodpoyt I I Ujfx Ahvsp Electrical Data • Operating voltage: 400 V • Frequency: 50 Hz • Rated current: 300 A • Connected load: 150 kW • Control voltage: 24 V DC Hydraulic System • Manufacturer: Parker Hannifin GmbH • Hydraulic oil: HLP 46 • Tank capacity: 90 l • Maximum pressure: 130 bar Pneumatics • Operating pressure: 6 ± 0.6 bar • Air requirement: approx. 300 m³/h Centralized Lubrication • Manufacturer: Willy Vogel AG • Type: MFE5-KW6-S1+299 • Lubricant: CGLP 220 • Lubrication cycle: every 10 min • Tank volume: 6 l Coolant System • Manufacturer: MANN + HUMMEL • Filtration unit: K90 L T63-PF750D-T-ND-SSP • Flow rate: 500 l/min at 4.4 bar (10 µm filter) High-Pressure Unit • Manufacturer: MANN + HUMMEL • High pressure: 80 bar • Flow rate: 50 l/min • Pump: ALLWEILER Chip Removal • Scraper belt conveyor with pump unit • Conveyor capacity: 550 l/min at 1.3 bar Extraction • Manufacturer: IFS Industriefilter GmbH • Type: IFM 2000 Recooling Unit • Manufacturer: BKW GmbH • Type: WRK30-2KK2P • Power: 8 kW Pallet Changer • Manufacturer: Fördertechnik Mayer GmbH & Co. KG • Type: F.M. 2667-0

Condition: used, HYFRA VWK 270-EN cooling water recooler Nedpfeyn Sbnex Ahvjcp

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor Ncodpew Ed U Njfx Ahvsp - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Nedpfxeg D H Rus Ahvjcp Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Nedpjkdnv Tjfx Ahvjcp Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software very good condition

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Nedpfx Ajxrpm Uehvecp Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG - JamBox - Powder feeder PF 2/2 Nedpoym Ay Eofx Ahvjcp - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch - Control cabinet - TS modem adapter

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Ncsdpfx Ahoymnykevsp Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Technical details: current capacity: 100 kVA Ncjdou Nv Eaopfx Ahvsp throat: 600 mm arm distance: 600 mm control: Bosch Programmier-Feldbusse pincer opening adjustable: 240 - 540 interface: RS 485 voltage: 500 V connection voltage: 380 V air pressure: 6 bar cooling water consumption: 14 l/min weight of the machine approx.: 770 kg space requirements of the machine approx.: 1,5 x 0,95 x 2,1 m SPOT WELDING MACHINE - WELDING TRANSFORMER Application: Spot, projection and series spot welding 1 - 1000 Hz Lifting cylinder electrode force 11 daN PSI 6000 medium frequency inverter with integrated control function (50/60 Hz AC mains voltage) Electrode arm Ø 35mm Electrode holder adjustment 200mm (manual) Arm distance min. 240mm max.: 540mm Manual adjustment Operation via Rexroth IntraControl VCP05 control panel and foot switch incl. replacement electrodes (water-cooled) external Rittal water recooling unit SK3320.609 *

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra Ncedpsu Ndbpefx Ahvop The machine can be demonstrated under power. *

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos Nsdpsx Ahivsfx Ahvscp +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage +++ Note: Machine is part of an online open sale! +++ Nodpfx Ahjx Ahfwevscp