Used Recoiler Decoiler for sale (340)

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Dodpfexzug Ssx Ab Tecr Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Dodpfoxzr Rusx Ab Tscr Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun Dsdpfxsvxgm No Ab Tocr • Great time saving compared to glue bottle and hammer

Condition: used, Year of construction: 2002, pressing force: 880 t, lifting height: 305 mm, SLIDE .. total force (nominal): 880 to .. stroke: 305 mm .. cutting velocity min.: 5 mm/s Dcjdpfxjxy E Uds Ab Tsr .. cutting velocity max.: 70 mm/s .. closing velocity: 200 mm/s .. returning velocity: 200 mm/s V-RING .. nominal force: 400 to .. stroke: 40 mm COUNTER RAM .. nominal force: 200 to .. stroke: 40 mm TOOL DIMENSIONS .. lower table (left-right): 1010 mm .. lower table (front-back): 1600 mm .. upper table (left-right): 1000 mm .. upper table (front-back): 1000 mm .. shut height max.: 460 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 450 mm .. sheet thickness max.: 16 mm .. feeding step min.: 1 mm .. feeding step max.: 999.9 mm .. sheet length min: 3950 mm .. speed max.: 48 m/min .. Vertical adjustment: 140 mm .. nominal force: 60 kN ELECTRICAL SPECIFICATIONS .. total power consumption: 188 kW .. main drive power: 160 kW ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. closed cabin: yes .. decoiler: no .. leveller unit: no .. waste cutter: yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, IKAFI Profiling Machine/Trapezoidal Sheet Forming Machine/Roll Forming Machine with automatic control and receiving table is a state-of-the-art device designed for the precise processing of coil sheet metal. Manufactured in 2022, this machine stands out for its high build quality and advanced technology, making it the ideal solution for companies involved in the production of metal sheet components such as trapezoidal sheets, profiles, or rolls. Key features: Automatic Control – The control system provides easy and intuitive operation, allowing for quick programming and full control of the production process. The sheet is automatically fed from the coil; the holder accommodates rolls up to 3 tonnes, an automated dimension-taking system is included, and a guillotine is part of the set. The machine is in very good condition and has processed approximately 1 tonne of sheet metal. Receiving Table – The integrated receiving table enables convenient and safe collection of finished elements, increasing work efficiency. Automatic Decoiler – The device is equipped with an automatic decoiler for coil sheet metal with a load capacity of up to 5 tonnes, which facilitates and accelerates material feeding into the machine, reducing production setup time. Dcjdpfxjx Aqbbs Ab Tjr Year of manufacture: 2022 – Modern technologies and components ensure the device's reliability and longevity, making it an excellent choice for demanding production facilities. IKAFI machines are valued for their reliability, precision, and versatility in sheet metal processing, making them one of the best choices on the sheet metal machinery market. Please feel free to contact us.

Condition: like new (used), Year of construction: 1992, conveyor belt thickness: 5 mm, coil weight: 15,000 kg, conveyor belt width: 1,520 mm, sheet thickness steel (max.): 3 mm, coil width: 1,500 mm, 1992 Guida Stainless Steel Cut to Length Line • Coil Weight: 15 tonnes • Coil Width: 500 – 1500mm • Cut Length: 350 – 6000mm • Thickness: 0.40 – 3.0mm • Coil I/D: 508/610mm • Max Coil O/D: 1500mm • Line Speed: Max 40m/min • Length Tolerance: EN9445 • Coating Facility: Yes • Operating System: Siemens S7-300 • Line Comprises: Coil Car; Expanding Mandrel; Decoiler with snubber roll; Pinch Rolls; 23 Roll Leveller (11/12); Flying Shear; Runout Table; Twin Stacking Units. • Electrical Revamp: 2007 There are 2 sets of spare straightening shafts. Dedpewbrv Tefx Ab Tscr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, number of straightening rollers: 9, roller diameter: 36 mm, plate width: 400 mm, number of feed rollers: 2, Double decoiler with straightening machine. Strip thickness: 2.5 mm. Strip width: 400 mm. Coil diameter: up to 1700 mm. Weight per side: 2000 kg. Control system: S7 – Year of manufacture: 2017. Switch cabinet platform is not included in the price. Dcjdpfx Asxiyyteb Tor

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 20P - C Frame Eccentric Press - 20 Tons (200kN) TECHNICAL DATA: * Power: 20 tons (200kN) * Strokes Per minute: 160 * Ram-Table Distance: 240 mm * Stroke Adjustment: 0 - 50 mm * Ram Adjustment: 40 mm * Table Dimensions: 360 x 550 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. Dcsdpenwfp Iefx Ab Tor * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A Dodpfx Aboxz Tuus Tecr - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Condition: ready for operation (used), Pressing force: 63 t Upright distance: 3200 mm Number of stages: 12 Tool center distance: 170 mm Dcjdoxz Tftjpfx Ab Tjr Maximum drawing depth: 70 mm Ram stroke: 200 mm Strokes: 28 - 112 /min Max. distance table to ram: 500 mm Maximum strip width: 280 mm Maximum strip feed: 180 mm Connection: 40.5 kW Height above floor: 3500 mm - with coil line (feeder/straightener, decoiler)

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds Dcedpfxoff Efae Ab Ter When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm Djdpfx Aovut Dyob Tocr material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: excellent (used), functionality: fully functional, I am selling this line, which consists of the following press, decoiler, straightener, and Rebenda VP 205 CNC roller feeder. The line has been dismantled and stored in a warehouse. Excellent condition, regularly maintained. Dodpfx Aoxz Dnxjb Tecr

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 160P - C Frame Eccentric Press - 160 Tons (1600kN) TECHNICAL DATA: * Power: 160 tons (1600kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 172 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 800 x 1100 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) Dcodjnyh S Rspfx Ab Tjr * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: good (used), Year of construction: 1990, Pallet decoiler, max. load 3,000 kg, power supply 380 V - 50 Hz, Dsdpfx Aoxx R Ndsb Tjcr

Condition: used, Year of construction: 2011, pressing force: 250 t, controller manufacturer: BECKHOFF, lifting height: 70 mm, CONTROLS .. PC controller BECKHOFF PRESS DESIGN .. drive system: servomechanic .. quick die change system: yes .. feedstock transport direction: left to right SLIDE .. total force (nominal): 250 to .. stroke: 70 mm .. stroke rate (max.): 140 /min COUNTER RAM .. nominal force: 80 to .. stroke: 25 mm V-RING .. nominal force: 125 to .. stroke: 25 mm TOOL DIMENSIONS .. lower table (left-right): 600 mm .. lower table (front-back): 600 mm .. upper table (left-right): 600 mm .. upper table (front-back): 600 mm .. shut height max.: 386 mm .. ram adjustment: 125 mm COIL CHAIR .. coil weight max.: 5 to DECOILER .. design: single reel .. sheet width max.: 500 mm .. coil weight max.: 5 to LEVELLER UNIT .. sheet width max.: 500 mm .. sheet thickness max.: 8 mm .. number of leveller rolls: 9 STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 250 mm .. sheet thickness max.: 10 mm .. pilot release system: yes .. band lubrication system: yes CROP SHEAR .. cutting force: 300 kN Djdpexx I Anofx Ab Tecr Peripheral equipment of the line: - Decoiler ARKU AH 5000/500/MSG-40 - Straightener ARKU Coil Master 5050/9 Condition: - 51,600 operating hours - 98 million strokes According to the latest OEM service inspection, the press requires the following repair: Overhaul of the joints and sealing of the hydraulic system. We will be pleased to provide you with a quotation for the repair and installation of the press via PHS, who is offering service and repair services for FEINTOOL presses

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW Dedpfx Abein Rn Ao Tocr -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm power requirement 0,7 kW weight 0,7 t Dcedpfsvuk R Dex Ab Tjr Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm can be inspected in running condition in our warehouse

Condition: used, 1 piece wire and strip bending machine, manufacturer Pneuform / CKS, model PB 600, year approx. 2018, serial no. 838, with motorized decoiler, roller diameter approx. 1m, internal ref. MA 0404, internal no. I440020 Dodpfx Ajxznyxjb Tecr

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm Dsdpfx Abenyh Sis Tjcr * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Year of construction: 2008, Coil decoiler Max. load capacity: 2,000 kg Suitable for coil inner diameters: 370 - 630 mm Max. coil outer diameter: — Max. coil width: 500 mm Dedpfxjxxlcxe Ab Tocr Drive power: 4 hp Induction loop control Brake Infinitely variable unwinding speed Weight: 500 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The Forstner nuSLIT Series makes all your dreams come true, in a modern sheet metal workshop and takes your production to a new level consider flexibility and productivity. With nuSLIT every function can be operated from the touch panel: coil width, finished lengths, straightening pressure to avoid stop marks, the width settings and operation of the slitting knives. nuSLIT can be integrated in a programmed production flow. The control system is totally compatible with nuIT, allowing you to plan and program your entire production from your office desk with no manual intervention. Combine with the number of decoilers you want and a manual or powered coil selector. There isn’t a better slitting and cut-to-length machine on the market! The most important advantages: Dcodpfx Abewy Hxae Tsr Alternating knife arrangement Unbeatable slitting precision Innovative clamping system Control system can be integrated with nuIT Fastest knife change on the market

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm Dodpfxof S I I Ho Ab Tscr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance Y-axis: 6,000 mm, equipped with 2 decoilers and a 6-meter outfeed table Dcodpfxexy Rpgs Ab Tjr

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 30P - C Frame Eccentric Press - 30 Tons (300kN) TECHNICAL DATA: * Power: 30 tons (300kN) * Strokes Per minute: 140 * Ram-Table Distance: 305 mm * Stroke Adjustment: 0 - 60 mm * Ram Adjustment: 60 mm * Table Dimensions: 400 x 600 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings Dcedpfenwfrusx Ab Tor * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine