Used Ras 400 for sale (70)

Condition: used, functionality: fully functional, Year of construction: 1963, Motorized Guillotine Shear Make: RAS, Model 52.7, 1040x2.5 mm Year of manufacture: 1963 Technical data Manufacturer: RAS Model: 52.7 Lrsdpsyizi Refx Ahvsi Sheet width: 1040 mm Sheet thickness: 2.5 mm Power requirement: 5.5 HP Dimensions: approx. L 1.65 x 1.10 (plus support arms) x 1.10 m Weight: approx. 1 t Equipment • Manual blade clearance adjustment • Manual rear gauge 500 mm • Angle stop • Support arms All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 1994, condition: good (used), electromechanical sheet metal shears brand RAS type 83.20. Year of manufacture 1994. Lredpeyiaitjfx Ahvji Cutting length 2040mm up to 3mm thickness Digital measurement of the rear stop 790mm. Sheet metal holder along the entire length - repair (adjustment) required. Rear pneumatic supports. Power 5.5 KW weight 2050kg.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Ledpfxov Tk Exs Ahveri Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm Ljdpfxjyiu Dhj Ahveri . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: good (used), Year of construction: 1990, Beading machine RAS 12.31 Sheet thickness max. 1.75 mm. Lredsvk D Tdjpfx Ahvsi

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Lredpfx Ajv A Tfgohvei Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Specifications : Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum thickness of sheet metal (stainless steel) 1.5 mm Maximum sheet metal thickness (aluminum) 3.0 mm Maximum development sheet width 1500 mm Maximum four-sided fold height max * 203 mm Bending blade reach 180 degrees Machine width 5500 mm approx. Machine length 7000 mm approx. Lrjdpfx Ajqzibtjhvsi Machine height 2500 mm Total weight 21000 kg Power 18 kW Frequency 50 Hz Pressure 6 bar INCLUDED drag loading system

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Lrodswq Rumjpfx Ahvji Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 4,060 mm, overall weight: 5,300 kg, type of input current: three-phase, FEATURES Working length: 4060 mm Working thickness: 2.5 mm Lodpewb Ar Ssfx Ahvori Rear table with spheres 155 additional tools to those present on the machine

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg dimension machine xH: 2,7 x 1,3 x 2,0 m Lrsdpfx Asya Eq Hohvsi

Condition: refurbished (used), Year of construction: 2001, XXL-Center RAS 75.06 Lrjdpfox Hf Tvjx Ahvji - General technical data (in mm): Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper jaws travel range: 10 – 750 mm Clearance in front of jaws up to: 300° Extendable loading tables: yes Gripper jaws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2001 Condition: To be completely overhauled - Images are for reference only -

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Max. sheet thickness: 4 mm Lredpfx Ahoyfm Udsvei Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Electrical connection: 7.5 kW Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts Lrsdpexacftsfx Ahvoi

Condition: used, Year of construction: 1963, sheet width 1040 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 90 Hub/min cutting angle 2.70 Grad distance between columns 1060 mm work height max. 940 mm back stop - adjustable max. 550 mm column arm 120 mm voltage 400 V engine output 4.0 kW weight of the machine ca. 820 kg. range L-W-H 1650 x 1200 x 1250 mm Equipment: - robust / motorized crank guillotine shears with motor drive - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analog position display * adjustable from behind Lredpfxoxach Io Ahvei * continuous adjustment over the entire travel range * travel range max. 550 mm - 1x hold-down bar - 1x side stop - 1x front support arm - original operating instructions

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment Lodoxcyw Ejpfx Ahveri - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: good (used), Year of construction: 1962, guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm Ledpfx Ahsdzd Huevsri -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Condition: used, Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail Lrsdpfot Rl Ulox Ahvei -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg Lrodpfsdy Rhdsx Ahvoi

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos Lredpfx Asgxgm Hohvoi -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 Lrodpfx Asx Hf E Eehvoi - New images available: Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-shape weight: approx. 1205 kg - Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, overall weight: 14,000 kg, working height: 1,000 mm, sheet thickness aluminum (max.): 3 mm, working length: 2,160 mm, TECHNICAL DETAILS Maximum bending length: 2,160 mm Maximum sheet thickness (steel, 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminum): 3.0 mm Minimum bent part length (without corner pieces): 260 mm Minimum bent part length (with 30 mm corner pieces): 450 mm Minimum bent part length (with 50 mm corner pieces): 500 mm Maximum external bent part width: 1,500 mm Minimum internal bent part width: 150 mm Maximum bent part height (four-sided): 203 mm Lateral clearance at the corner pieces: 30/50 mm Clearance in front of upper beam tool: up to 60 mm Bending beam swivel range: 180 degrees Working height: 1,000 mm MACHINE DETAILS Lrsdpfx Ahex Ngpkjvsi Dimensions & Weight Dimensions (L x W x H): 5,350 x 7,300 x 2,450 mm Approx. weight: 14,000 kg Maximum drive power: 25 kW Note: The vacuum stacking unit, neck and thread cutting device, and welding fixture visible in the images are not included in the scope of delivery or sale.

Condition: good (used), Year of construction: 1991, Sheet width 2500 mm Sheet thickness 4 mm Lrodpfetq S T Nsx Ahvei Cutting angle 1.49 ° Strokes per minute 40-80 Stand projection 200 mm Number of hold-down devices 13 pieces Backgauge - adjustable 5-1000 mm Table height 750 mm Oil capacity 85 l Air pressure - required 5 bar Machine weight approx. 3600 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 52/10, working width: 3,200 mm, sheet thickness (max.): 3 mm, empty load weight: 4,400 kg, TECHNICAL DETAILS Sheet width: 3,200 mm Sheet thickness: 3 mm Opening width of the upper beam: 300 mm MACHINE DETAILS Motor power: 4.5 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,300 x 1,750 mm Machine weight: approx. 4,400 kg Lodpfx Ahexyv Iuevsri EQUIPMENT Segmented pointed rail Segmented gooseneck tool

Condition: used, Year of construction: 2011, functionality: fully functional, RAS Multibend-Center Lrsdpfsx Iugnox Ahvsi - Fully automatic bending center - Very good refurbished condition - Complete tool set included; the upper beam tools are new - Bending cell with main manipulator, automatic tool changers for the upper beam and bending beam, automatic corner piece actuation, actuation for automatic up/down tools, mechanism for lowering the work surface upon arrival of the next sheet, set of fastening elements, main manipulator, feeder with stop, operator panel including touch PC, RAS Cell-Control software, emergency stop pillar, automatic tool changer with two independently operating gripper arms that fully automatically assemble the required upper beam tool length, grid pieces, adapter pieces, fixed corner piece, rotary base corner pieces - Images are sample images -

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Lrjdpfx Ahjx Hyhujvsi Sample images Sample video available on request -