Used Rapida 104 for sale (781)

Condition: ready for operation (used), Year of construction: 1995, Printing machines 2 colour offset printing machine KBA Rapida 72K Lsdpfjyx Iyvsx Aftjhi Year 1994 Serial No. 65802317 Year 1995 Printing sections 2 Size of paper MAX 520 x 720 mm Size of paper MIN 210 x 297 mm Printing speed 17000 sheets/hour Size of the printing plate 557 x 720 mm Size of the printing blanket 585 x 730 mm Counter 32 mios Current state: In production

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Ledpfx Afey Raimetehi Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure. Ledpsxz Niuefx Aftjhi

Condition: excellent (used), Beveling Machine Lodpowfzzmjfx Aftjhi Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Lhedpfswgz H Esx Aftji Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Year of construction: 2008, condition: used, Year: 2008 Condition: Funkcional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Lsdpjy H Hgdsfx Aftehi Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, We offer this ready for use Elumatec DG 104 Double Miter Saw, year of construction 1995. Machine is fully working. 6m long, 3 axis Manufacturer: Elumatec Model: DG 104 Lhjdpfjy Hpfvox Aftei Year of manufacture: 1995 Machine type: Double Miter Saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2013, Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Lodpfxehtuu Us Aftjhi Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.

Condition: excellent (used), mileage: 762,619 km, power: 315 kW (428.28 HP), first registration: 04/2003, fuel type: diesel, axle configuration: 10x4, wheelbase: 6,950 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro3, total length: 9,680 mm, total width: 2,520 mm, Year of construction: 2003, Equipment: ABS, air conditioning, electric window regulation, power mirror, = Additional options and accessories = - Air suspension - Leaf spring - Power take-off (PTO) - PTO - Radio/Cassette player - Radio/CD player - Speed limiter - Sun visor = Remarks = XL9AM27XE03010978 = More information = Rear axle 1: Lift axle Number of cylinders: 6 Empty weight: 13.600 kg Carrying capacity: 36.400 kg GVW: 50.000 kg Tipper: Back Technical condition: very good Visual appearance: very good Registration number: BN-RB-49 Ljdpsymqu Dsfx Aftjhi = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Two-jaw drill chuck, 2 hand-operated eccentric clamps, dial indicator in the handwheel, 2 speeds 1400 – 2800 rpm. The machine has been fully overhauled and newly adjusted at our facility. Lhodpfjyzc E Sex Aftji

Condition: good (used), Format: max 720 x 1,040 mm; min 360 x 520 mm Thickness (sealed materials): max 0.5 mm; min 0.06 mm Total dimensions (W x H x L): 3,340 x 8,960 x 2,175 mm Weight: 26,920 kg Equipment - Steel plate feeder & delivery - Unimatic C3 remote control - Automatic color adjustment via the control panel - Lateral, linear and diagonal register from computer - Powder applicator Lhodpfxsqrqwme Aftji Perfecting - 2/2-4/0

Condition: ready for operation (used), Size max 720 x 1040 mm Lhsdpfx Aedz Alcsftji min 360 x 520 mm Image area max 710 x 1030 mm Speed max 13.000 c/h Pile height feeder 1400 mm Pile height delivery 1130 mm Equipment • pile feed & delivery • perfecting • Dahlgren dampening • Baldwin refrigerated recirculation • powder spray & Baldwin sheet decurler

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm Ljdpoimdlrefx Aftohi - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: used, Year of construction: 2008, Offset 2 color with coating KBA Rapida 105-2+LV CX Year: 2008 Number of impressions (mio): 48 Machine control - ColorTronic - ErgoTronic Professional - LogoTronic Basic - CX Package Feeder - DriveTronic feeder - Non-Stop feeder Printing units - Number of printing unit(s): 2 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Dampening cooling and circulation system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 1 - Harris & Bruno chambered ductor blade system - Number of Anilox roller(s): 1 Drying - IR + hot-air dryer in delivery Delivery - Extended delivery Ljdpfxjx Exg To Aftohi - Powder spray: Grafix Accessories - Compressed air compressor

Condition: used, max. width of grinding wheel 104 mm diameter / bore of grinding wheel 160 mm Flange taper compatible with NZA, AZA, RZ301E etc. Lsdpfou Sbdyex Aftehi

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 29110004034, functionality: fully functional, operating hours: 9,442 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 30, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Control: Siemens 810D Powerline Table surface: 1,250 x 600 mm X-axis travel: 1,040 mm Y-axis travel: 600 mm Lodpfswa Tmwsx Aftehi Z-axis travel: 500 mm Spindle & tool holder Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Spindle drive: 13 kW / 19 kW (100% / 40% ED) Tool changer: 30 positions MACHINE DETAILS Spindle hours: 9,442 h On-time: 32,189 h EQUIPMENT - Linear drive in the X-axis for more precise movements - Bed flushing to clean the work area - Spiral chip conveyor for efficient chip disposal - Direct position measuring system for precise Position determination - Temperature compensation of the Z-axis via temperature sensor with active cooling unit - Blown air from outside via two pipes for chip removal

Condition: ready for operation (used), Year of construction: 2002, operating hours: 38,040 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC Control: Heidenhain iTNC530 X-axis: 1,040 mm Y-axis: 600 mm Z-axis: 500 mm Linear drive: On the X-axis Worktable Dimensions: 1,250 mm x 600 mm Max. workpiece weight: 800 kg Spindle Spindle operating hours: 38,040 h Spindle speed: 12,000 rpm Tool System Taper type: SK-40 Tool magazine capacity: 30 Tool diameter: 100 mm Max. tool diameter with empty neighboring pockets: 140 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Length: 3,750 mm Width: 2,340 mm Height: 3,164 mm Weight: 8,900 kg EQUIPMENT - Direct measurement system - Blum tool laser measurement for tool length and diameter Ledpfx Aoxal Rxeftehi - Chip conveyor - Bed flushing - Electronic handwheel

Condition: used, Year of construction: 1995, table-size Breite: 800 mm table-size Tiefe: 350 mm Ledpfx Aewp Tuysftshi Dimensions (L/W/H) 4600 x 3200 x 2500 mm weight of the machine ca. 4,5 t

Condition: ready for operation (used), Year of construction: 1996, KBA 104-5P, Auto wash, auto plate, IR dryer, 1996 year Format: max - 72x104 cm min - 28x42 cm max speed 15000 per hour weight approx 49 tons Lsdpfeyi T Ncex Aftohi dimensions 11x4.3x2.3 m

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Lhedpfx Afowprmzetei Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Lhsdpfju T Nhmox Aftji Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Ledornkwrepfx Aftohi Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Year of construction: 1996, condition: good (used), functionality: fully functional, machine/vehicle number: 26 628, Technical specifications: Cutting length: 5000 mm Lsdeyill Hjpfx Aftohi Saw blade: 420 mm with roller conveyor Saw unit swiveling and tilting

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Adapters for excavators can also be custom fabricated and supplied upon request. Lhedpfx Asw Rkxqsftei Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no

Condition: like new (used), Year of construction: 2026, Band width: max. 76 mm Feed length: max. 76 mm Band thickness: 0.076 - 1.91 mm Speed: max. 195 strokes/min at full feed length Feed force: 205 N with mechanical control valve or optionally, as shown in the picture, with solenoid valve (24V or 230V) Lhedpfxexaqvs Aftei also available in: - band widths from 38...400 mm - feed lengths up to max. 300 mm - band thicknesses 0.05...3.18 mm