Used Pvd for sale (13)

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Ppedpszgv R Njfx Amysw

Condition: ready for operation (used), A fully functional Platit PI111 is for sale. Ppsdpozh Hlyefx Amysw

Year of construction: 2023, condition: ready for operation (used), A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible. Ppjdpfx Amezhb Hloyew

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Pjdpjhwv Tfofx Amyopw Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Ppedpoy D Uphofx Amysw Dismantling and transport are the responsibility of the buyer.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Ppedjy Htgwepfx Amyjw Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Condition: excellent (used), Year of construction: 2020, operating hours: 5,000 h, functionality: fully functional, Generally, the FHR.Line sputtering machines are systems for the deposition of metals, alloys or compound layers, preferably on planar substrates on carriers. The systems can be configured according to the requirements of the customer and are able to run in DC-, MF- and RF-mode as well as for metallic or reactive Pedjx Rxwpjpfx Amyspw layer deposition. Due to the modular design principle, different deposition technologies can be combined. Substrate size 2500x1000mm

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 11176, We are offering this used CemeCon CC 800/9 HIPIMS Magnetron Sputtering PVD System, year of manufacture 2006. Manufacturer: CemeCon Model: CC 800/9 Serial number: 11176 Year of manufacture: 2006, upgraded in 2013 and 2025 Weight: 3,000 kg Protection rating: IP 20 Power rating: 166 kVA Evaporators: 6 Voltage: 3x400/N/PE V Frequency: 50/60 Hz Cemecon CC800/9 HIPIMS - 6 cathodes - All cathodes DC, 2 also HIPIMS capable - Booster anodes - 4 gases, 1 of which is flammable - BIAS: DC, MF-pulsed, or HIPIMS - 3x heating - 2 turbo pumps - 6-position substrate holder - Multiple targets - Includes option for BNC terminal for Peak I, U, and P at HIPIMS cathodes + BIAS - Extensive accessories such as loading material, spare parts, consumables - In 07/2023, the system control was upgraded to the latest standards and a manufacturer service was performed. Ppodpfxox Tt T Ro Amyjw A bundle option is also available including a chiller, a precision substrate cleaning system, and a lapping/polishing machine. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 910718, 1 Cloos workpiece positioning unit, swivel and rotary device, with a protective screen in the center of the table. 2x2m distance between centers, center height 1300mm, 180° swivel unit type GR502, motorized. Two rotary devices with opposing supports are mounted on the platform of the rotary table. The drive side of the rotary device is designed as in type WPV-DP-5000 N. Load capacity per rotary device approx. 500kg. Was mounted on a Cloos welding robot ROMAT 76 S with Rotrol control, manufactured in 1990. Podpfx Amozkvarjyspw No exchange, return, or warranty possible.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Ppodpfozmapvjx Amysw Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications Pedpfx Ajzixyfomyspw • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC dry vacuum pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform, high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features: The LR series pump is designed for load lock chambers and PVD processes. ULVAC's unique aluminum design enables very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Sealed motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when exposed to corrosive gases. (LR series) Designed for process gases that generate powdery byproducts, such as Si crystal growth furnaces. Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Ppedpfezdqtgox Amysw Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demo unit. Can be viewed and tested in our showroom. Ppedpfx Amox Hgb Usyow Self-collection or delivery available (plus transport costs). Equipped with integrated heating. Key Features: - Professional cleaning in a closed cycle using water, blasting media, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels are stabilized by a pneumatic wheel support to prevent tipping - 50°C water temperature thanks to built-in heater for improved cleaning performance - After the wash cycle, wheels are blown off with compressed air - Automatic, environmentally friendly wheel washing machine - Minimal water consumption - Time savings due to automatic washing process - Robust stainless steel casing - Programmable water heating - Double noise insulation - Washing chamber and pump sump - Compartment for drive and controls Technical Specifications: Dimensions (W x D x H): 960 x 1,220 x 1,450 mm Weight (empty): 290 kg Water volume: 300 l Blasting media capacity: 25 kg Rated output (motor and drive): 6 kW Heating capacity: up to 50°C with 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Max. wheel weight: 60 kg Washing program durations: 40 / 60 / 120 seconds Heating time: 60 – 120 min Water temperature: 50°C Working media quantity: 20 kg Pump capacity: 600 L / min Electrical connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE plug) Min. operating pressure: 4 bar Max. operating pressure: 10 bar Noise level: 89.5 dB (A) Scope of delivery: 1x 360 HP wheel washing machine 1x Blasting media 25 kg 1x Blasting media basket 1x Rubber mat 1x Sound insulation foam 1x 30 liters washing fluid 1x Perforated PVD noise reduction filter