Used Pvc Twin Screw Extruder for sale (9,362)

Condition: good (used), 4150 operating hours Dkodpfxewy Hx Hj Ac Nei

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,012 h, functionality: fully functional, machine/vehicle number: 1.8174.0, overall weight: 600 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, power: 18.5 kW (25.15 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in like-new condition and fully functional. With 2012 operating hours and recently serviced, the compressor is ready for use. Kaeser filter combination FG-48, FFG-48B, and FF-48B included. See attached photos. Further details available via email or phone. Dkodpfow S Im Iex Ac Nji

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Djdpfjv H E Alox Ac Neki

Condition: excellent (used), Year of construction: 2011, SCREW COMPRESSOR ATLAS COPCO GA110VSD 120Kw 2011 Screw compressor ATLAS COPCO GA110VSD machine with inverter and heat exchanger Dkjdetqdlpepfx Ac Noi Technical data: capacity: 18.72m3/min; 120 KW engine; max pressure 10 bar; mileage; 17483h year; 2011 Fully functional compressor, ready to work, warranty we provide service.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, Dkedpfox Dihcex Ac Nei - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Dkjdpfsm E Im Tjx Ac Nei Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Dkodpfxow R En Ho Ac Nji

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Dsdpfoynda Aex Ac Neki Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 Screw Compressors Previously used for pneumatic unloading of railway wagons. Dkodpfxjrkpp Hj Ac Nsi Manufacturer: Aerzen Model: VM 30 Volume flow rate: 27.17 m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell-and-tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2,800 mm Width: 1,150 mm Height: 1,770 mm Weight: approx. 2,750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular servicing was carried out by an authorized service company!! Units have not been in operation since 2019. Since then, they have been stored in a dry, heated location.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Dkedpfjvz E S Nox Ac Noi Total power requirement 0,5 kw

Condition: good (used), Year of construction: 2014, Offer 26042 - Operating hours: 49,500 h - Operating pressure: 11 bar - Delivery rate: 680 l/min - Drive: 400 V / 5.5 kW - Motor speed: 2,950 rpm Dedpfx Acjyrfzpj Neki - Air receiver: 200 L - Required space: approx. W 600 x H 1,600 x D 1,000 mm - Weight: approx. 250 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80011, turning diameter over bed slide: 260 mm, center height: 130 mm, turning length: 500 mm, spindle speed (max.): 3,135 rpm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 500 mm Swing over bed: 260 mm Swing over cross slide: 200 mm Centre height over bed: 130 mm Centre height over cross slide: 100 mm Spindle bore: 22 mm Spindle speed: 13 to 3,135 rpm MACHINE DETAILS Dsdpfx Asym Udpsc Njki Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,500 mm Weight: 500 kg EQUIPMENT Tailstock Quick change tool post Collet chuck 8 additional tool holders External reference: Pieper - Lot 61

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Dksdpfeym Tx Sox Ac Nei Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm Djdpeyrb Tnjfx Ac Noki - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders 1 H32 cutoff blade holder 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC main bearing grinder Technical Details: Dkjdpfjym Syhox Ac Noi Crankshaft length 630 mm x diameter 180 mm, 2 grinding spindles (grinding wheel diameter 400 mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16 tons

Condition: used, Year of construction: 2000, Lot consists of: (1) CNC con-rod bearing grinder. Technical details: crankshaft length 600 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 in-process grinding wheel balancing system, CNC LANDIS 6400, weight approx. 16t. Dsdpfx Acsym Spio Nski

Condition: excellent (used), axle configuration: 2 axles, first registration: 03/2002, total length: 6,910 mm, total width: 2,550 mm, suspension: air, tire size: 315/80-R22.5, wheelbase: 5,500 mm, Year of construction: 2002, Equipment: ABS, = Additional Options and Equipment = - BPW axles - Alloy wheels - Air suspension - Drum brakes = Remarks = 2002 VAN HOOL 2-axle 20ft tipping chassis with HYVA lifting cylinder, ABS, BPW Eco with drum brakes, twin tires with 315/80-R22.5 tires (L: 11/11mm, 10/10mm; R: 11/11mm, 9/9mm), unladen weight 4,560 kg, maximum gross weight: 32,000 kg, Dutch registration with valid technical inspection (APK) until 19.03.2026 = Further Information = Axle configuration Tire size: 315/80-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 70%; tire tread left outer: 70%; tire tread right inner: 70%; tire tread right outer: 70% Rear axle 2: twin tires; alloy wheels; max. axle load: 9,000 kg; tire tread left inner: 60%; tire tread left outer: 60%; tire tread right inner: 55%; tire tread right outer: 55% Weights Unladen weight: 4,560 kg Payload: 27,440 kg gross vehicle weight: 32,000 kg Functionality Body make: VAN HOOL 2B0033 Condition Technical condition: very good Visual condition: very good Identification Registration number: OV-95-ZP Further information Dksdpfx Acjybk Rns Nei Please contact Arne Honingh for further information.

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Dkedom Rhfdspfx Ac Noi

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Dedpfxsym Rqfs Ac Noki Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 500 kg External reference: Pieper – Lot 55

Condition: not inspected (used), functionality: unexamined, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Swing diameter over cross slide: approx. 260 mm Center height over cross slide: 130 mm Center height over bed: 170 mm Center distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm MACHINE DETAILS Operating voltage: 380 V Dedoym N Nyjpfx Ac Nski Frequency: 50 Hz Rated current: 12 A Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 700 x 1,500 mm Weight: 1,200 kg EQUIPMENT Tailstock Multifix quick-change toolholder Quick-action chuck Including collets Various accessories External reference: Weitner

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 012015030, center height: 200 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,000 kg, three-jaw chuck diameter: 210 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Centre height over cross slide: 120 mm Centre height over bed: 200 mm Centre distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm Dodpoym N Enefx Ac Nski Three-jaw chuck diameter: 210 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Connected load: 5 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Three-jaw chuck SMW External reference: Weitner

Condition: not inspected (used), functionality: unexamined, turning diameter: 280 mm, center height: 145 mm, center width: 750 mm, spindle speed (max.): 3,500 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Dkedpfeym N D Rex Ac Noi Swing diameter over bed: 280 mm Swing diameter over cross slide: 178 mm Centre height: 145 mm Centre distance: 750 mm Spindle speed: 70 – 3,500 rpm Spindle bore: 35 mm Spindle nose: D 1-3 Tailstock taper: 3 MT Leadscrew diameter: 25 mm Thread: 6 mm pitch MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 11 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,800 mm Weight: 800 kg External reference: Neuburger

Condition: not inspected (used), functionality: unexamined, turning diameter: 360 mm, center height: 180 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: approx. 360 mm Swing diameter over cross slide: 240 mm Center height over cross slide: 120 mm Center height over bed: approx. 180 mm Spindle bore: approx. 48 mm Center distance: approx. 700 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Dksdpfx Aoym N D Dsc Noi Tailstock Multifix quick-change tool post Quick-change chuck Various steadies Digital readout External reference: Lot 18 / Ulmer

Condition: not inspected (used), functionality: unexamined, turning diameter: 300 mm, center height: 150 mm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified time frame: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Dedpfx Aceym N A He Njki TECHNICAL DETAILS Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Centre height over bed: 150 mm Centre height over cross slide: 100 mm Centre distance: 500 mm Spindle bore: approx. 28 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,400 x 700 x 1,600 mm Weight: 800 kg EQUIPMENT Multifix turning tool holder Four-jaw chuck (Ø 130 mm) Digital readout by HEIDENHAIN External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 300 mm, center height: 150 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,030 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: approx. 300 mm Dsdpeym N Aasfx Ac Njki Swing diameter over cross slide: 200 mm Centre height over cross slide: 100 mm Centre height over bed: 150 mm Centre distance: 750 mm Spindle bore: approx. 35 mm Spindle speed: 40 – 2,800 rpm MACHINE DETAILS Operating voltage: 380 V Connected load: 3 kW Rated current: 25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,860 x 700 x 1,800 mm Weight: 1,030 kg EQUIPMENT Tailstock Multifix Type B toolholder 3-jaw chuck (diameter: 160 mm) 2-axis digital readout by RSF External reference: Mahle