Used Pvc Cards Punching for sale (3,741)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Blodpsxcbbrefx Ab Tsr Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Bsdpfoxytpcox Ab Tslr Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Bodpfx Ajm Ak Hujb Tslr Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 6500 kg Main Drive Punching force 300 Kn Blsdpfxoxwzx Tj Ab Tsr This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Bsdpfx Aeu Hxmzob Tjlr

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery Bedpfjxwp Nyjx Ab Tjlr if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Blodpfx Absxf Uqro Tor Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license Bodpfx Absxmfc Us Telr - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), table size: 350x350mm Bodpofm A Amsfx Ab Tslr

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey Bedpfxetvnlbo Ab Tolr

Condition: excellent (used), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, feed length X-axis: 7,800 mm, feed length Y-axis: 150 mm, total height: 2,800 mm, pressing force: 60 t, total length: 3,950 mm, total width: 1,635 mm, input frequency: 50 Hz, input voltage: 400 V, For sale is a Lafranconi LM1200 CLASSIC XL SPECIALE, year of manufacture 2018, with only 600 operating hours. The system is in excellent condition and is ideally suited for complex punching and bending processes on wide material cross-sections. The modular design, modern Siemens control, and tool compatibility make this machine extremely flexible and versatile. Blodpfx Absxyav Ns Tor

Year of construction: 2020, condition: excellent (used), LICHTER LRK 400 PVC PIPE HEAD FOAM CORE PIPE HEAD-THREE LAYER Application: PVC FOAM CORE PIPES KG-U PVC pipes Accessories: Tools for the production of pipes in diameters 250 mm, 315 mm and 400 mm Blsdpfx Abewqgito Tsr The pipe head was in operation for about 1 year, due to business closure. Condition not new but in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Germany

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 mm Measurements height 2263 mm Machine weight 14500 kg Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Bedpfxoxv Ez Nj Ab Telr Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Application Types Punching

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Blsdpfx Ajrknnfeb Tjr Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. Bsdpfofim Dwex Ab Tjlr ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Bledpfswp Aa Sox Ab Tor

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Bedpexvv Tvjfx Ab Telr Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Bsdoxxzhwjpfx Ab Telr

Condition: good (used), FOR SALE BRUDERER BSTA 50 PRESS Automatic precision press by Bruderer Blsdpfxoxvri Tj Ab Tsr Model: BSTA 50. Max. press force: 500 kN (50 t). Speed range: 100 – 1,200 spm. Adjustable stroke: 16; 19; 25; 32; 38; 44; 51 mm. Equipped with Bruderer BBV 202/120 feed unit. Max. strip width: 203 mm. Max. strip thickness: 6 mm. Max. feed length: 120 mm.

Condition: repair required (used), 3-column press Installation dimensions: W 350 mm x L 200 mm x H 250 mm incl. roller feed Bedpfxexxm Aae Ab Telr

Condition: good (used), Year of construction: 1991, General Features: • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Included: • Standard documentation (if available) Bsdsxxlbhepfx Ab Tjlr • Machine as inspected at current location Condition: • Good working condition for its age • Can be tested under power • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS Blsdpfsxl Talsx Ab Tjr B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2002, The KSF-2E is the world’s leading specialized CNC milling machine for fully automated production and complete machining of high-quality cross joints and grids in the serial manufacturing of glazing bars for windows and doors. Thanks to its dedicated aggregates, the machine produces cross joints from wood, aluminium, MDF, or PVC with outstanding quality and precisely processes all components of the glazing bar grids. OPERATIONS: • Cross joints in various designs and sizes • End processing of glazing bars • Cutting frame profiles to size The machine is additionally equipped with a transverse feed/magazine for components. Bodexl Dnaspfx Ab Tolr

Condition: used, Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Bsdpfxsxu N Evo Ab Tjlr Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Working hours: approximately 38,000 hours Equipment / Additional information: Stripping system (stripping station) with centering frame Die-cutting plates (over 500 pieces) Tools Technical data Blodjxixhispfx Ab Ter Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Running speed/hour: Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Gross weight: 25000 kg