Used Punching Tools for sale (37,076)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm Nwodpfomck Ryox Ah Hob - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Nodeycvhnspfx Ah Hjwb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,680 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, total height: 2,500 mm, total length: 2,700 mm, total width: 2,000 mm, working range: 1,680 mm, spindle motor power: 2,200 W, number of clamping sleeves: 12, Equipment: documentation/manual, 4-axis CNC machining center ISEL Sonderanlage - 06/2007 X1680 Y1000 Z600 – spindle 2.2 kW / 15,000 rpm – table 1660×1750 mm – 4th rotary axis Ø1660 L1750 mm – PC + MAYKA (installed on integrated PC) Ready for use, operational and can be demonstrated under power. Location: Industrial zone 06510 CARROS CNC machining center / milling machine, 4-axis, brand ISEL (isel automation – Germany). Special custom-built machine “Sonderanlage” (manufacturer’s plate), year 06/2007, Serial No. 293215/1, CE marked. Primarily used for precision foam machining, but this is a true CNC machining center: the range of materials depends mainly on tooling and process parameters. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not accessible in this configuration. Mayka installed and fully functional on the PC. Last tested 13/01/2026: all axis movements OK. Can be inspected and tested onsite: axis travel and start-up possible. Chip extraction included but non-operational (requires servicing). Operating hours: not available (counter inaccessible) Travel: X 1680 mm / Y 1000 mm / Z 600 mm Usable table: 1660 × 1750 mm (T-slots / clamping) 4th rotary axis included: Ø 1660 mm, length 1750 mm Drive: ball screws + belts, linear rail guides Drives: servo motors Nsdsycqu Nepfx Ah Hswb Spindle ISEL F8LI2S2/-8-043: 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle-specific system) + clamping nut Cooling: spindle air cooling + chiller present Safety: fully guarded machine + emergency stop Noise: approx. 50 dB during operation, 65 dB during Y-axis movement Power supply: 400V three-phase, 16A – compressed air not required Lubrication: none Control / PC / Software Electrical cabinet included Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and functional on integrated PC (no separate dongle/USB key required) Maintenance / service history • March 2019: PC replaced • March 2019: all drive belts replaced • March 2019: iCCE10 CANopen PCIe card (1 channel) replaced • Last test: 13/01/2026 – all movements tested and operational Brand: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travel: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW – 15,000 rpm Supply: 400V three-phase – 16A PC/software: integrated PC + MAYKA

Condition: ready for operation (used), Year of construction: 2017, operating hours: 135 h, functionality: fully functional, machine/vehicle number: 6693371/1, travel distance X-axis: 1,480 mm, travel distance Y-axis: 1,090 mm, travel distance Z-axis: 617 mm, total height: 2,320 mm, total length: 2,800 mm, total width: 2,000 mm, working range: 1,480 mm, spindle motor power: 3,600 W, tool diameter: 32 mm, Equipment: documentation/manual, 4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017 X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control Ready for use, can be seen powered on Location: Industrial zone 06510 CARROS Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no.: 669371/1, CE marked. Dimensions: length 2.80m – width 2.00m – height 2.32m Machine in “as new” condition, very little use, fully tested. Hours: 135.53 operating hours 144.04 powered-on hours Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm) Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Usable table: 1540 × 1500 mm – T-slot table Transmission: ball screws, linear guideways Nwjdpfx Ahsycqm Ee Heb Drives: EC-Servo motors SPINDLE / TOOLING ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm ER32 collet Pre-equipped for pneumatic tool changer (ATC): tool magazine not included, but can be added (arrange through supplier) 2 tool holders (1 mounted on the machine) Tool length probe included Cooling: spindle air + included chiller Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + keyboard included (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16 A Compressed air required: yes, 8 bar (for pneumatic components) Dust extraction: not included Lubrication: none Enclosure with emergency stop Noise level: approx. 50 dB max Dust extraction port/connection prepared: no Condition / Testing Condition: “as new”, no known issues (play, errors, sensors: nothing to report) Last tested: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software & license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Various clamping accessories + tool length probe Set of end mills / drills included (see photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial number: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travels: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 operating / 144.04 powered-on

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll Njdex U Sfnspfx Ah Hjwb • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: reconditioned (used), > completely overhauled and newly painted Nedpfx Ahsfuazto Howb > Passage width 900mm > roller table

Condition: used, Year of construction: 2004, gebraucht 2004 4540 ca. 2 Wochen ab Auftragse Österreich 19900 € 1 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm Nwedpfx Ahswirmnj Heb 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: new, Year of construction: 2025, neu 2025 090185 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Nwsdpfxowirmbj Ah Hsb OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Nsdpjx U Eiaofx Ah Hewb Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), functionality: fully functional, Height 475 mm Width 200 mm Operating pressure 6/7 bar Operating temperature 0/40° C Weight 20 kg Nwjdpfox U Efnox Ah Hsb

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Nwjdpfxox U A H Ne Ah Hsb +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150 152, total height: 6,615 mm, ram adjustment: 200 mm, installation height: 800 mm, table height: 1,000 mm, total width: 3,210 mm, total length: 5,140 mm, table length: 3,000 mm, table width: 1,400 mm, pressing force: 400 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,100 mm, distance between side stands: 1,100 mm, distance between stands: 3,020 mm, overall weight: 100,000 kg, year of last overhaul: 2025, ATTENTION: The machine will be completely overhauled mechanically and electrically before delivery in 2025/2026. Press force: 4000 kN Adjustable stroke: 50 - 300 mm Ram adjustment: 200 mm Strokes per minute: 15 - 60 Die installation height: 800 mm Table dimensions: 3000 x 1400 mm Ram dimensions: 3000 x 1200 mm New SIEMENS S7 1500 series control system Nodpfx Aow H Ag Toh Hewb

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine suffered transport damage and will be completely overhauled mechanically and electrically before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Nsdpfx Ahsw H Arvs Howb Table dimensions: 1500 x 1200 mm (Press will be delivered with a brand new table plate, T-slot design of your choice) Ram dimensions: 1500 x 1000 mm Control: SIEMENS S7 1500 series, Year of manufacture: 2020

Condition: used, Year of construction: 1990, serial number 28043 Nsdpfx Ajpxri Heh Hjwb weight 3 t pressure 30 t volt 380 V frequency 50 Hz

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm Nwjdpfxsryaqys Ah Hob total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 1975, 1640 weight 280 kg Nwedpfsh H Eqnox Ah Hsb ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm Nwodsd N Smhepfx Ah Heb z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2005, condition: used, tool adaptor 50 mm Nsdpfjgtyhrsx Ah Hewb driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze pressure 50 t Nwsdpjndz Npofx Ah Heb

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder Nsdpfex Uyl Njx Ah Howb

Condition: excellent (used), functionality: fully functional, Deckel FP1 milling machine. Very good condition. Fully functional. Nsdpfxjxgdr Is Ah Hjwb

Condition: reconditioned (used), Year of construction: 1987, Universal toolroom milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 113 Year of manufacture: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 - 2000 rpm With the following accessories: Nwodpepxm Anjfx Ah Hsb Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drilling spindle sleeve Stepless feed via potentiometer 1 pcs. Machine vice 1 pc. Counterholder with counterbearing 1 pc. Milling arbor long 0 22 mm Various tool holders S 22 x 2 Bellows Z axis Machine light Automatic central lubrication pump Chip collecting plate Coolant device Operating instructions THE MACHINE IS IN A VERY GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 Nwsdpfx Ajw Agxreh Hob With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: used, x-travel 300 mm y-travel 275 mm z-travel 200 mm Nedpjx Uru Asfx Ah Howb spindle tunring speed 40 - 2.000 U/min tool taper ISO 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Njdpfxsx Urcao Ah Hewb Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time - Welding gun with lift ignition PMH70 - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition