Used Promatic P for sale (40,948)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Ppsdpfx Ahswr Nnboyer

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 5,600 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,500 mm, fork length: 1,400 mm, drive type: Elektro, Electric side loader Load center: 600 Mast type: Standard Pedpfxou Ac Afs Ahyjpr Technical condition: good Fork positioner, Hydraulic extendable forks 3rd valve, 4th valve,

Year of construction: 2019, condition: used, functionality: fully functional, For Sale: M&P Radish Top & Tail Machine – High-Efficiency Vegetable Processing Manufacturer: M&P Engineering Model: Radish Top and Tail Machine Condition: Excellent / Fully Operational Location: Fincham, Norfolk Availability: Immediate Description: Boost your vegetable processing efficiency with this M&P Radish Top and Tail Machine – a high-performance solution designed for the precise and rapid trimming of radishes. Built to the highest standards by M&P Engineering, this machine is ideal for commercial vegetable processors looking to streamline operations and maintain consistent product quality. Key Features: Accurate Top & Tail Cutting – Clean, consistent cuts reduce waste and improve product appearance. High Throughput Capacity – Designed for continuous operation and optimal productivity. Hygienic Stainless Steel Construction – Easy to clean and built for food-grade environments. Adjustable Settings – Accommodates different radish sizes for maximum flexibility. Plug & Play Setup – Minimal installation time; ready for immediate use. Pjdpfowtf Awsx Ahyspr Ideal for: Food processing plants, fresh produce packhouses, and ready-to-eat salad manufacturers.

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Elektro, Electric sideloader Load center: 600 Mast type: Standard Technical condition: good Battery year of construction: 2021 Description: Battery year 2017 Hydraulic extension forks 1400/2450 mm Podpfx Ahsu Acz Ioyspr Fork positioner, Hydraulic extension forks 3rd valve, 4th valve,

Condition: good (used), functionality: fully functional, 1 x Technofour Electronics (P) Ltd metal detector with audible alarm and belt stop reject system, on painted frame with height adjustable feet. Aperture dimensions - 400mm wide x 180mm height. Belt - neoprene, 1500mm long x 400mm wide. Condition - good, runs and detects. Pjdewuvd Iepfx Ahyspr

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: NL, Demag P416 H7 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 6300Kg - 6,3t Ppjdoupw A Sepfx Ahysr 380V 16A, lift 3,5m, 4 strands ( 2 lifting speeds - 4 / 8 m/min ) Used condition Collection in 75053 Gondelsheim, forklift available for loading Shipping by forwarding agent possible, please ask for zip code

Year of construction: 2024, condition: as good as new (ex-display), Metalclean - Metalclean-P-120 spray cleaning system in stainless steel Single-tank spray cleaning system with rotating basket. Ppedpjir Anqsfx Ahyjr With pneumatic oil separator Stainless steel pump with spray pressure 5 BAR Useful dimensions= D= 1,200 mm H= 700 mm Load capacity / batch = 300 KG Tank volume = 270 liters Operating voltage = 3 x 400 V/N/PE 50 Hz Vapor extraction

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Podpfxsuzh Ans Ahyepr Positioning table Portal stacker Pallet size 600x800 - 1200x1400 mm

Condition: reconditioned (used), Year of construction: 2017, J&P casepacker KVKF 400, 2017 This J+P casepacker is designed for the automatic packaging of products into various types of cardboard packaging. The machine handles the following packaging formats, among others: American case closed American case open Psdpjhtfc Isfx Ahyspr Open trays

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 Ppjdpfx Asxa Evzehysr - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm Pedpfx Ahjyvgiaeyepr - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 956.67 € 200 x 32 x 32 mm 1 kW 2800 1/min Pjdpfxoy H N Azj Ahyjpr 42 mm 250 mm 470 mm 230 mm 325 x 540 x 310 mm Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single shift operation ALTERNATIVE VERSIONS: .: 317.774with machine stand, emergency stop buttom and brake .: 317.777 with MA400D integrated extractor, machine stand, emergency stop buttom and brake

Condition: used, Year of construction: 2008, control Siemens 840D Pedpowzypnofx Ahyspr

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U Ppjdpfx Aheua It Usyjr radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. Ppedjy H Er Ejpfx Ahysr - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 Ppjdpfx Aey H Epwohysr horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: new, empty load weight: 7,320 kg, maximum load weight: 22,680 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Podpfx Ahoy H A N Ieyopr

Condition: used, functionality: fully functional, We offer a spot welding machine from the well-known French manufacturer SCIAKY, model P 264. The machine is in good technical condition, robust industrial design, suitable for production use. 🔧 Technical data: Manufacturer: SCIAKY (France) Model: P 264 Machine number: 680 833 C Welding circuit voltage: 380 V / 50 Hz Power: 312 kVA Auxiliary circuit: 220 V / 50 Hz Pneumatic system: 5 bar Electrode force: approx. 300 kg Type: spot / resistance welding machine 📌 Condition: Pjdpfxoy Hqgze Ahyopr Used machine Operational (inspection possible) Good visual condition according to age 💰 Price: 6,000 EUR 📍 Location: Bydgoszcz, Poland 🚚 Terms: Loading included (FCA Bydgoszcz) Transport can be arranged

Condition: as good as new (ex-display), Year of construction: 2026, Pressing area: 3000mm x 1300mm Opening: 450mm Pjdjhpl U Ispfx Ahyopr Heating: electric / thermal oil Maximum temperature: 120°C Plate surface: stainless steel Press opening: automatic - timer / manual Emergency stop: yes, with pull cord Pressing force: 120t Number of cylinders: 6 Current consumption: 36A Power consumption: 21 kW Machine length: 3600 mm Machine width: 1800 mm Weight: 4500kg

Condition: used, Year of construction: 1998, Used deduster Year of manufacture NE 250 W, right-side pneumatic filter regeneration Including suction nozzle d = 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on/off switch, potential-free contact for machine monitoring and automatic start/stop function, motor protection switch, airflow monitoring / differential pressure indicator, 3 mobile dust bins with inserted chip bags and clamping brackets, robust filter module made of galvanized sheet steel with automatic extinguishing system. Technical data: Maximum airflow: 5,050 – 5,600 m³/h Podpfey Hmzhex Ahyepr Nominal airflow: 3,532 m³/h Corresponding negative pressure: 2,500 / 2,960 Pa Suction side connection: d = 250 mm Mode of operation: continuous duty Power supply: three-phase current Power consumption: 5.5 kW / 9.8 A Filter area: 25.2 m² Filter cleaning: automatic, pneumatic Total chip collection volume: 480 liters Chip bags (PE): 600 x 600 x 1,100 mm Weight: approx. 1,100 kg Noise level according to EN 23744: 72 dB(A) L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Compressed air standard coupling NW 7 approx. 6 bar, serviced and cleaned compressed air Extinguishing water connection 1" at 3 bar 1 x 32 A CEE socket Due to varying extraction volumes and differing chip/dust contents, the uniform filling of the bins cannot be guaranteed in every operating situation with this system. Dedusters of this series are suitable for the extraction of wood dust and similar types of dust, whereby an H3 residual dust content of 0.1 mg/m³ is reliably maintained. Availability: by arrangement Location: Frankfurt

Condition: used, Year of construction: 2005, Approx. 68 million prints Format 36 x 52 cm Autoplate N+P CP-Tronic Alcolor Automatic ink roller washing device, automatic blanket washing device, automatic counterpressure washing device Shed feeder Low-stack delivery Plus version Powder device Ppodpfx Asylwltehyor Available: immediately

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Machine weight: 22,000 kg Ppsdpfxjy Hfm Ns Ahysr Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm Ppsdpewiqq Ssfx Ahysr 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: new, empty load weight: 6,760 kg, maximum load weight: 23,240 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, , incl. axle load indicators, , vehicle hot-dip galvanized, also with 9 m loading area length + widening in stock, , Surcharge for, aluminum ramps = price: 1.600 ¤, warning signs with lighting = price: 800 ¤ , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Pjdpfx Ahsy Hcl Aoyopr

Condition: used, Year of construction: 2001, Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure, Mist extractor Probe, Machine lamp, Automatic central lubrication, Coolant system dielectric fluid Fire extinguishing system Measuring mandrel Alphanumeric keyboard cutter outer diameter max: 250 mm Psdsyzm Iwjpfx Ahyepr cutting length max.: 200 mm shank tool diameter: 10 - 250 mm cutting length: 200 mm Outside diameter of disc-shaped tools max.: 250 mm tool weight max.: 20 kg X-axis travel: 220 mm Y-axis travel: 300 mm W axis travel: 200 mm A-axis rotation range: 60 ° A-axis taper: ISO 40 E-axis swivel range: 120 ° number of revolutions: 80 - 2000 rpm. Dimensions L x W x H: 2235x2630x2130mm mass: approx. 4500 kg Connected load approx.: 400V / 50Hz / 4.5KW colour: turquoise RAL 5021/grey RAL 9002