Used Power Harrow for sale (40,236)

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Hnedpjxltu Njfx Afiju

Condition: new, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, rotational speed (max.): 1,500 rpm, fuel: domestic gas L, overall weight: 11,100 kg, input frequency: 50 Hz, input current: 1,299 A, empty load weight: 11,100 kg, Equipment: documentation/manual, For sale: New natural gas cogeneration unit. JENBACHER JMS 412 GS-N.L Gas engine: Jenbacher J412 GS-B06 (928 kW) Generator: Nidec Leroy-Somer LSA 50.2L8 C 6S/4 (400V/50Hz) The package includes a complete Jenbacher gas engine with ignition, lubrication, and cooling systems. Also included: gas assembly (valves, regulator, filter), electrical cabinet, electrical equipment, and complete technical documentation. Operating hours: 0. Warranty: none. The engine has been inspected by an authorized service center. No issues detected. Immaculate condition. More information and photos available upon request. Hnjdpfx Afoxlr Dieisu

Condition: new, Year of construction: 2024, empty load weight: 1,790 kg, _____Technical data: Max. Tractor power 110 kW / 150 HPWorking width: 3 metersTransport width: 3 metersDiameter of serrated discs: 510 mm (thickness 6mm)Number of discs 24Working depth 3-10 cmLower link attachment: Cat. II, III, N, IIISpecial equipmentHydraulic roller adjustmentLighting,Storage location:zero Hnodpfx Afst Inh Neieu

Condition: excellent (used), The machine is from the year 2007 and has only operated for 5,000 hours. It was primarily used to test casting molds, which explains the low number of operating hours. The machine can be inspected and tested under power in Germany - 64850 Schaafheim. For further information, please contact us. In addition to the machine, plastic granulate as well as other accessories and spare parts (see pictures) are available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located in 64850 Schaafheim (Germany), fully assembled. Condition: The machine can be connected to power for demonstration. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Hodpfx Afexldtisienu Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and mold data: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold thickness: 250 mm Maximum mold thickness: 700 mm Daylight: 950 mm Centering hole: Ø 125 mm You are welcome to arrange a viewing and test of the machine at our premises in Schaafheim by appointment. Kind regards,

Condition: used, Hydraulic Power Unit ACME TYPE ZPR 6 Ref. No.: 962116 Year of manufacture: approx. 1972 Operating pressure: max 40 bar Flow rate: 10 litres/min. Tank capacity: 15 litres - In-line filter Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz Installation dimensions (L x W x H): 500 x 270 x 500 mm Net weight: approx. 80 kg Test run with pressure test Hedpexf Uz Djfx Afienu

Condition: as good as new (ex-display), Power Former / ECKOLD KF 324 / incl. 3 sets of tools NEW / UNUSED - CE marking Hsdpfxsxk U Rcj Afienu - Throat - horizontal 340 mm - Throat - vertical 245 mm - Working stroke 8 mm - Drive motor power 1.5 kW - Formable sheet thicknesses: - Steel 400 N/mm² max. 2 mm - Aluminum 250 N/mm² max. 2.5 mm - Stainless steel 600 N/mm² max. 1.5 mm - Ram adjustment via handwheel Includes 3 tool sets: - Clamping tool complete LFS 60S - Z – Smoothing tool TP 25 / S – rigid - Plastic former complete PFW 60 S - Documentation - Connection cable Dimensions: LxWxH 1.4x0.8x1.8 meters / Weight: 600 kg Subject to errors and input mistakes.

Condition: like new (used), Year of construction: 2016, Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Hodpou Eki Sjfx Afijnu Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Hsdew E Npxspfx Afionu Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Hsdpfx Aoif Az Ujfienu Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, total height: 2,935 mm, total length: 2,180 mm, total width: 2,273 mm, spindle speed (max.): 7,000 rpm, feed length X-axis: 460 mm, feed length Y-axis: 320 mm, feed length Z-axis: 660 mm, type of input current: three-phase, overall weight: 4,650 kg, center height: 190 mm, grinding spindle motor power: 24,000 W, input voltage: 400 V, nominal power (apparent): 35 kVA, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2005 CNC control: HMC 600 Software installed: Walter Window Mode Colour touchscreen: Yes Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis (table movement): 460 [mm] Max. Stroke speed X axis: 15000 [mm/min] Stroke Y axis (vertical movement): 320 [mm] Max. Stroke speed Y axis: 15000 [mm/min] Z axis travel (transverse movement): 660 [mm] Max. Stroke speed Z axis: 15000 [mm/min] A axis: 360 [°] C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 300 [mm] Max. grinding length: 350 [mm] Min. grinding diameter: 3 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 7000 [rpm] Grinding spindle motor power: 24 [kW] Max. diameter grinding wheel: 200 [mm] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 35 [kVA] Dimensions: 2180 x 2273 x 2935 [mm] Weight : 4650 [Kg] INCLUDED EQUIPMENT: x1 WALTER WINDOW MODE software Hjdpfjxfu Tmex Afionu x1 ECO LOADER tool loading robot (SCHUNK type) x1 20-station loading pallet x1 automatic tool clamping system x1 RENISHAW LP2 tool probe x1 SCHUNK collet chuck Ø32 [mm] x1 lubrication tank + paper filtration x1 GRUNDFOS coolant pump x1 fire protection device (to be inspected by the buyer through a qualified body) x8 wheel holder arbors + spacers x4 wheel holder erosion adapters x2 technical manuals (paper) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Operating pressure: 115 bar Flow rate: 4.5 litres/min. Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Hedpoxf Uzqofx Afionu Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil

Condition: used, mileage: 18,892 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Hsdexitmgopfx Afienu Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Hnjdpfxoi Ebrgj Afisu

Year of construction: 2004, condition: used, Empty weight: 1.250 kg 6D16-T Occ stroomgroep Mitsubishi 6D16-T 106kW Hedpfsxh E Rbox Afionu Article nr.: W304033001-veiling Used power group Mitsubishi 6D16-T 140KVA

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity Hnsdowzyh Rspfx Afisu - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: used, This listing is for the Invitrogen PowerEase 500 Power Supply Hedpfx Afjxhfzmsienu The unit is in full working condition and is ready for immediate use The Invitrogen PowerEase 500 is a simple, sturdily constructed, leak-free, and user-friendly electrophoresis power supply designed for mini-gel electrophoresis of DNA, RNA, or proteins. Its compact benchtop design is ideal for laboratory settings focused on reliability and convenience. Summary The PowerEase 500 combines robust construction with microprocessor control and flexible programming, making it a reliable workhorse for gel electrophoresis. Its dual-output design, programmable memory, and simple user interface help streamline repetitive lab work while maintaining precision and safety.

Condition: used, Hydraulic Power Unit with Hydraulic Pump FRIEDRICH - REXROTH - HYDRONORMA Hydraulic unit type HY01 - PV2V3-30 / 12R1MC 63 A1 Year of manufacture: 1979 Pump operating pressure: 80 bar Hnedpfx Ajxf Uzkofisu Pump flow rate: 14 liters/min (unloaded) Motor power: 1.5 kW Tank capacity: approx. 30 liters Power supply: 400 volts, 50 Hz - Silent power unit, space-saving design - Hydraulic pump BOSCH REXROTH type PV2V3-30 / 12R1MC 63 A1 - Solenoid valve BOSCH REXROTH 081WV06P1N112 - Return line hydraulic filter - Pressure gauge - Hydraulic tank with top lid for easy access - Electric switch for 2-way changeover Space required (L x W x H): 415 x 410 x 850 mm Net weight: 85 kg Good condition

Condition: used, New: No Empty weight: 2 kg Part suitable for: trucks Type number: GP-24-1000 Genius Power GP-24-1000 Occ omvormer Genius Power GP-24-1000 Hodsxhrumjpfx Afisnu OEM : GP-24-1000 Article nr.: V154999003-veiling Used Inverter Genius Power GP-24-1000

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Hnjdpfx Afexhfqhjiou Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs

Condition: used, Hydraulic Power Unit, Hydro Unit BOSCH REXROTH Type Solo FD 101 Hydraulic Power Unit Year of manufacture: approx. 1980 Operating pressure: max. 115 bar Hodpfx Afjxf Uzdjienu Flow rate: 12 litres/min. Tank capacity: approx. 80 litres (with central oil sight glass) Motor power: 3 kW Power supply: 400 Volt, 50 Hz - BOSCH REXROTH hydraulic pump, type Solo FD 101 - 1 piece 5/3 way directional control valve, 24 Volt - 1 piece return filter - 1 piece pressure regulator - Tank dimensions L/W/H: 650 x 400 x 470 mm - Connection fittings for hydraulic pipes 12L Required space L x W x H: 700 x 430 x 1300 mm Net weight: 130 kg in good condition

Condition: used, This listing is for the Lascar PSU 130 CMD23 Benchtop Power Supply The unit is in full working condition and is ready for immediate use The Lascar PSU 130 is a compact, single-output benchtop power supply module. It provides an adjustable DC output ranging from 1.5 V to 30 V, with a maximum current of 1 A—ideal for electronics labs or testing environments Hjdpfxoxhffxe Afijnu Specifications include: Wide input voltage range: ~100–240 VAC, 47–63 Hz Built-in over‑voltage, over‑current, and short‑circuit protection, plus excellent regulation with low output ripple Front panel includes a back‑lit digital display for voltage and current, a rotary adjustment knob, and 4 mm output terminals

Condition: used, 3-jaw wedge rod lathe chuck FORKARDT type F 315 No.: 1334942 Diameter: 315 mm Inner diameter: 85 mm Max. speed: 2000 rpm Chuck mounting: cylindrical centering ring mount Ø 300 mm - Wedge rod lathe chuck with centrally adjustable jaws - 1 set of hard reversible jaws for turning and boring - 3 through-holes for Allen screws for flange mounting Weight: 61 kg Good condition Hjdsxf Uy Hepfx Afienu

Condition: used, Hydraulic power unit with HILMA hydraulic pump Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Power supply: 400 Volt, 50 Hz - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) Hjdexf Uyyepfx Afijnu - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition

Condition: used, Hydraulic unit, Hydraulic Power Unit VICKERS Order No.: 62357390 Year of manufacture: approx. 1985 Operating pressure main pump: 60 bar Flow rate main pump: 16 liters/min. Operating pressure cooling circulation pump: 5 bar Flow rate cooling circulation pump: 5 liters/min. Tank capacity: 160 liters Motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 2 hydraulic pumps (1x main pump, 1x cooling circulation pump) - 1 BOSCH accumulator, 2 liters - Pressure relief valve - Hydraulic filter - Cleaning cover Required space L x W x H: 1000 x 620 x 1100 mm Own weight: approx. 150 kg In good condition Hedpfx Afexf Uyaeijnu

Condition: used, Hydraulic Power Unit, SPERRY VICKERS Hydraulic Power Pack Order No. 624186 Year of manufacture: approx. 1985 Operating pressure: 60 bar Flow rate: 6.5 liters/min Tank capacity: approx. 30 liters Motor power: 1.5 kW Hjdpfxsxf Ux Nj Afijnu Power supply: 400 Volt, 50 Hz - SPERRY VICKERS hydraulic pump, type GPA1-4-E - 2 solenoid operated directional valves SPERRY VICKERS, type DG4V-3-2C-UH-10-S300 Dimensions (L x W x H): 500 x 300 x 730 mm Net weight: approx. 70 kg Good condition