Used Pouwels Def 100 for sale (42,962)

Condition: used, material width max. 100 mm material thickness 0 - 3 mm feed length max. 120 mm Lasdpotqm Dbsfx Ab Ujh material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Lajdoqa Dv Tspfx Ab Ueh Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: new, Year of construction: 2025, overall weight: 9,000 kg, pressing force: 100 t, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, Lasdpsd Hn Taofx Ab Ujh mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric Lajdpfjfc Hbdsx Ab Ush connected load: 400 kW gases used: nitrogen, hydrogen

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/100 hydraulic workshop press with adjustable cylinder Ljdpfxogipi Ts Ab Ueah Technical specifications pressure 100 t stroke 300 mm table surface 1570 x 260 mm column passage between the guides 1570 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1580 kg. Space requirement approx. 2630 x 1000 x 2290 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Lsdpfx Aovdtx Nsb Ueah Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: used, Used DSI V-5 32/100 vertical plate freezer on Freon/NH3 with 32 stations. Inner dimensions 1 station: 810x100x580 mm (LxWxH). Total block dimensions with a volume of 239 liter: 4100x840x580 mm (LxWxH).It is possible to freeze 507,7 kg of fish fillet each hour with a thickness of 100 mm. Lsdpfxorlk H Rj Ab Usah

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, stroke length: 600 mm, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Lodpfottriaox Ab Ueah

Condition: excellent (used), Year of construction: 2018, operating hours: 5,700 h, functionality: fully functional, machine/vehicle number: DAD-3 BL/TR 600/100/9500, total length: 8,500 mm, total width: 3,236 mm, total height: 2,816 mm, input frequency: 50 Hz, water pressure: 2.5 bar, Equipment: documentation/manual, The BVL continuous cleaning system is ideal for cleaning stamped parts and other industrial components that require precise and thorough cleaning. Particularly noteworthy is its suitability for stamped parts with a surface tension of up to 42 mN/m. Ledpeu Un T Dofx Ab Uoah The BVL washing system recently underwent a comprehensive general overhaul. The system is equipped with a Festo robotic arm fitted with various grippers to precisely transfer parts from the conveyor belt to the washing station. The robot arm enables flexible and efficient handling of different objects thanks to the adaptability of the grippers, which vary depending on the type of part. In addition, three canisters of the BVL 730 cleaner are still in stock.

Year of construction: 1984, condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm Ljdsqwpv Sepfx Ab Ueah hole in the table Ø 200 mm table height 820 mm tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t Lsdpfsgipilex Ab Ujah stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Year of construction: 2016, condition: new, Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Lsdeiamrrspfx Ab Usah Max. Load: 7Kg Max. Working range: approx. 1633 mm Year of construction: 2016 Table area 750x500mm each Total dimensions: approx:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW Laodpfjcmr D Hex Ab Ueh fans power: 2 x 4 kW

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC Laodpfxjxmgr Rj Ab Ujh MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: FA19-63709.1, pressure (max.): 5 bar, CSN instantaneous water heater type 97/DF-100 with 2-stage contactor control Laedpfx Ajvtrltjb Ush Instant water heater: Voltage: 400V 3 Power: 100kW Protection class: 54 Levels: 2x25/ 1x50 kW min/ max. temp.: 0/ +90°C Filling volume: 54 liters Control: Type: 200S01004002451903 S/N: FA19-62758.1 Voltage: 400V 3/PE AC 50 Hz Power: 100kW Protection class: IP 43 The instantaneous water heater type 97/DF-100 with STS 2 is a reliable solution for the efficient heating of liquids in industrial processes. With its robust design and precise temperature control, it is ideal for applications where constant and uniform heating is required.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Condition: Well-maintained (training machine) Equipment: Milling unit 5 kW Tool holder, cylindrical, 25 mm with hook spanner clamping Drilling unit 1.5 kW with 19 spindles Crosshead with 4 drilling spindles Saw unit can be swiveled from X to Y. Light barriers in the front area New PC in 2015 Operating system: Windows 98 Weeke software: Woodwop 4.0 Technical data: Laedpfxoxqihco Ab Ujh Travel range X: 3455 mm Travel range Y: 1480 mm Travel range Z: 260 mm External dimensions: Length: approx. 6115 mm Depth: approx. 3660 mm Location: Röllbach Availability: short-term

Condition: new, Year of construction: 2025, feed length X-axis: 310 mm, feed length Y-axis: 170 mm, feed length Z-axis: 340 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 55 rpm, Macmon M100 NC with Heidenhain TNC 128 Year of manufacture: 2025 The machine is new and can be inspected at any time. The Macmon M100 NC is a compact universal milling machine designed for precise machining tasks in workshops, training environments, and small batch production. Its robust cast construction and backlash-free guideways ensure high accuracy and repeatability. Equipped with the Heidenhain TNC 128 control system, the machine allows for both conventional manual operation and NC-controlled machining. The cross axis (Y) is fully controlled, while the longitudinal (X) and vertical (Z) axes can be operated either manually or automatically. Technical data: Control: Heidenhain TNC 128 Travel ranges: Lajdpfxexqh Hde Ab Uoh Manual operation: X = 310 mm / Y = 170 mm / Z = 305 mm NC-controlled: X = 300 mm / Y = 165 mm / Z = 300 mm Controlled axis: Cross axis (Y) Milling head: swivels 0–90° Drive: infinitely variable Operating modes: Manual and NC operation can be combined Equipment: Coolant system, work lamp, machine cabinet Condition: New (Year of manufacture 2025) Immediately available Can be inspected under power at any time

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Laodewwl I Ispfx Ab Ueh The UMA was built in 1961 and the guides have been rebuilt.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), color: other, Year of construction: 2025, Equipment: cabin, CONSTMACH DRYMIX 100 is a fully automatic dry type concrete plant without a mixer. Concrete components are transferred directly into the transit mixer after weighing, without any mixing process. This feature provides a significant advantage, especially in projects where concrete needs to be transported over long distances. DRYMIX 100 offers high efficiency and durability thanks to its fixed, non-mobile structure, and can be used safely in many regions of the world due to its adaptable design for different climatic conditions. This model can be integrated with cement silos with capacities ranging from 50 to 500 tons. When supplied in cement bags, it is easily transferred to silos thanks to the blasting bunker and silo filling systems. In plants used in cold regions, the system is heated with hot steam generators and insulated panels, while in hot climates, concrete temperature is maintained at the ideal level with cooling units. Furthermore, aggregate pre-feeding systems eliminate the need for a feeding ramp, saving space on site. The user-friendly automation system is supported by top-class SIEMENS and SCHNEIDER brand electronic components. The PLC control system manages the production process fully automatically and ensures maximum accuracy with high-precision weighing systems. Lsdpfx Abjxqg A Re Ujah DryMix-100 Dry Type Concrete Plant Technical Specifications Production Capacity: 100 m³/h Weight: 33 tons (excluding cement silo) Total Motor Power: 70 kW Electric Generator Requirement: 200 kVA Required Operating Area: 700 m² Aggregate Storage Bunker: 4 x 25 m³ Aggregate Weighing Bunker: 3 m³ Aggregate Weighing Belt: 1000 x 11,100 mm Aggregate Transfer Belt: 1000 x 10,800 mm Cement Weighing Bunker: 1,200 kg Water Weighing Bin: 600 liters Additive Weighing Bin: 50 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the DRYMIX 100 Concrete Batch Plant? CONSTMACH DRYMIX 100 is the most suitable solution for long-distance concrete transportation requirements. Its mixerless structure, low maintenance cost, and high production capacity increase operational efficiency. Thanks to its structure that can be adapted to all weather conditions, it offers the same quality whether in the freezing cold of Siberia or the scorching heat of the Middle East. Its advanced automation system ensures maximum accuracy with minimal human intervention. At CONSTMACH, we offer a reliable investment with world-class engineering quality, a fast service network, and spare parts supply. By choosing DRYMIX 100, you can add long-lasting, efficient, and high-performance production power to your projects. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 384, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 500 mm, overall weight: 1,500 kg, jaw width: 160 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 1,300 x 500 mm Magnet dimensions: 1,020 x 450 mm Grinding wheel diameter: 250 mm Jaw width: 160 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Control voltage: 220 V Lsdpoxqf Uxjfx Ab Uoah Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3 T-slots Magnetic chuck Various grinding wheels Vice Belt filter system

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 397234 Serial number: 397234-6 Material: Aluminum Total weight: 25 kg Dimensions Base plate: 410mmx300mmx25mm Lajdju Raw Aepfx Ab Ush Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 570mm The Tünkers LE100-100 VRL SB T02 is a compact pneumatic linear unit developed for precise linear movements in industrial applications. With a pneumatic drive, this unit is particularly suitable for automated manufacturing processes where precise and reliable positioning is required. Its robust design ensures a long service life and reduces maintenance requirements, even under demanding conditions. The pneumatic linear unit can be mounted flexibly and can be installed both horizontally and vertically, making it suitable for a wide range of applications. It can also be equipped with sensors and other control components to precisely monitor and control the movements. The Tünkers LE100-100 VRL SB T02 is a versatile and durable solution for industrial applications that require high accuracy and reliability.

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Lajdpfx Aboxqfi Ao Ujh Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h

Condition: used, Veneer press Ott type 300 K 100 with electrically heated plates for pressing veneer or other workpieces. Ledpfexqff Dsx Ab Uoah Pressing surface: 255 x 135 cm

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Main motor power [kW]: 11.0 - Year: 1990 - Documentation available: Yes - Serial number: 11584/90 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) Ledpswmbcysfx Ab Ueah - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Price: On request Shredder opening:1000 mm x 800 mm Rotor diameter: 230 mm Number of rotor revolutions: 80 to 120 rpm Main motor power 18 HP Output per hour: 500 to 1,500 kg per hour Air discharge speed: 20 to 30 m/sec. Lasdowh Nbgspfx Ab Ush Slider with: Adjustable hydraulic feed ram Transport dimensions: LxWxH 3x1.5x1.5m - Year: 1998 - Documentation available: No - Serial number: 273407 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels