Pressure roller

unbekannt 295/100/H100 mm

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Features: Year of manufacture: 2005 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Djdpfxsyparde Akvswa Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel CIP 4 system Supplied with plate punch and bender The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary.

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg Djdpfx Ajmghawjkvewa

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Dwsdpjtyyvwofx Akvoa Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 200 mm Dodpfx Ajkrgiqjkvewa -Dimensions total: 3000/2000/H800 mm -Weight: 4500 kg

Year of construction: 2011, condition: ready for operation (used), Chiller CLIVET Type: MDE-32.300 Cooling capacity: 700 kW 2x REFCOMP compressors 134-S-140-LZ and 134-S-160-LZ Dwjdpfxjh Nm Ibs Akvoa Refrigerant: R134a Year of production: 2011 Condition: Used / In working condition Stock status: 3 units Price is without air condenser We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A Dwjdpfx Ajh R D Rdokvea -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. Djdpfxoq Nx Als Akvswa The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 10,000 kg, total length: 11,600 mm, total width: 2,560 mm, total height: 600 mm, input voltage: 220 V, type of input current: three-phase, input frequency: 60 Hz, TIR body/chassis repair frame for trucks and large-size vehicles TM-M60 This is a professional device designed for comprehensive repair and straightening of various body and chassis elements of trucks, delivery vehicles and cars. Thanks to its solid construction and the equipment with 6 towers with high pulling force (25 tons each), this frame allows for effective performance of advanced repairs, such as restoring the shape of damaged elements, straightening distortions or eliminating warps. High load capacity and precise tools make our repair frame perfect for professional workshops, guaranteeing speed, accuracy and reliability during repairs of large-size vehicles. Parameters: - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column tension: 25 tons (245 kN) Dedpovuxygjfx Akvjwa - Load capacity: 50000 kg - Column working range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. With 6 towers, each with a maximum pulling force of 25 tons. 2. With a complete set of pushing and pulling tools, adapted to any type of straightening. 3. A lifting device with a capacity of 50 tons, which effectively repairs distorted beams. 4. With a 25 ton hydraulic arm that allows for the repair of distortions, bulges, twists, etc. 5. Four towers are 2500 mm high, and the other two are 4320 mm high. 6. Possibility to choose a color from the RAL palette. 7. Number of towers to be chosen by the customer.

Condition: excellent (used), Zeiss stylus kit in very good condition Dsdpfx Aksurlqcjvjwa

Year of construction: 2000, condition: excellent (used), LVD Delta 1250 in perfect condition with many tools. X Y - 2500 x 1250, plus reposition Dwodpfx Akorgqrnsvoa 2 x Indexing head