Used Pottinger Novacat 305 for sale (1,555)

Condition: used, Year of construction: 2013, x-travel 650 mm Cjdexzk Npspfx Ab Terk y-travel 765 mm z-travel 520 mm weight of the machine ca. 10000 kg

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Crodpfx Aowaa D Aob Tok Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, mileage: 164,385 km, Year of construction: 2008, operating hours: 19,184 h, Drivetrain Drive: Wheel Weights Empty weight: 41.000 kg Functional Lifting capacity: 55.000 kg Identification Serial number: 30559558 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Cjdpfjxpdcfjx Ab Tjrk Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.29x2.7x3.66 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Credpfxsw S E N Tj Ab Tsk Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), Year of construction: 2006, 3x Lift System, Kardex XP 500, approx. 3m high, 450kg per tray, Tray size: approx. 3m x 86cm – used – : Price per unit ex-works: €16,500 (net), dismantled, packaged, and loaded, plus transport and reassembly! Price when purchasing all 3 units: €14,500 (net) per unit, dismantled, packaged, and loaded, plus transport and reassembly! Manufacturer: Kardex Model: Shuttle XP-500-3050-864 Serial number: 06000136/001 - 003 Year of manufacture: 2006 Permissible total load: 2x 34,200 kg Load capacity per tray: 450kg Number of trays: approx. 11 pieces per unit Tray dimensions: 3050 x 864mm Machine dimensions: Width: approx. 3.38m Depth: approx. 3.12m Cjdpfxsxv Uc Ae Ab Tsrk Height: approx. 3m 3/N/PE 400V, 11.0A, 6.5 kVA Condition: good – very good Available: from approx. end of November / beginning of December 2025 Location: Frankfurt am Main area Currently, the three units are installed side by side – when placing the units individually, side panels are missing. The buyer would need to supply suitable panels (simple sheet metal is sufficient for covering).

Condition: used, Year of construction: 2022, Knapp angled roller conveyor accumulation 2430-510-450 RA2380 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2430 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller angle: 7.6° Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Crodov I Hqtjpfx Ab Tsk Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, This is a 305GTP dry steam pressure cooker from the premium manufacturer Hobart, built in 2018. The medium-sized 305 GTP dry steam pressure cooker is often used in the communal catering sector. With its 3 x 1/1 GN racks, it cooks up to 650 portions per hour fresh and to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated steam has major advantages over hot air or combination steam in terms of the heat flux density that can be transferred. Shorter cooking times mean less loss of nutrients and healthy food. The appliance has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this appliance is €28,202 net. Our used appliance service for you - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Condition: Used, tested and fully functional Technical data: - External dimensions WxDxH: 600x785x950mm - Electrical connection: 400V 3NPE, 50 Hz, 26,7kW - SN: 97-0224-579 - Year of construction: 2018 - Portions: 650/h - Capacity: 3x 1/1 GN max. 65mm, 2x 1/1 GN max. 100mm, 1x 1/1 GN max. 200mm Further information: - Gentle, healthy cooking: Steaming, stewing or blanching - 3 different pressure levels 0 / 0.5 / 1 bar for individual adjustment to the food to be cooked - Extremely short cooking times - Individual temperature program (TP) 50 °C - 99 °C as standard - Electronically controlled program sequences - Built-in exhaust steam destruction with vapor condensation as standard SUITABLE FOODS - All types of vegetables - Pulses and rice - Pasta and dumplings - Meat that would otherwise be cooked - Fish and seafood - Desserts such as yeast dumplings or crèmes - and much more. Shipping: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request Cjdpjun R R Tsfx Ab Tork - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: new, The vertical shelving system is a sophisticated storage solution for the upright storage of long goods such as roof battens, skirting boards, pipes, or beams. It was specially developed for both commercial and private use and offers a particularly space-saving alternative to traditional horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or self-service areas in retail. The scope of delivery includes: 1x Vertical Shelving System, new Csdpowd Srmsfx Ab Terk Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Overhang: approx. 500 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer: Mazak Design: Vertical Machining Center Model: Variaxis 630II Control: Mazatrol MATRIX Year of Manufacture: 2012 Additional Equipment - Tool magazine for 120 tools - Signal lamp – machining completion: yellow - Synchronized tapping - Rapid traverse with constant tilt angle during movement - 3D coordinate transformation - Multiple pallet system (6 pallets integrated in the system) - 70 bar preparation, incl. interface for high-pressure unit Mayfran Consep 2000 II with chip conveyor Accessories/Features - Manuals - Operator door with interlock switch - Work area enclosure for a clean machining environment - Upper cover for chip throw protection - Work area lighting - Coolant supply – cooling for ball screw spindle - Complete coolant system - Spindle coolant unit - Measurement system: tool length measurement and tool breakage detection Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Travel X-axis: 630 mm Travel Y-axis: 765 mm Travel Z-axis: 510 mm Swivel range A-axis: from -120° to +30° (CNC controlled) Swivel range C-axis: +/-360° (CNC controlled) Max. distance spindle nose–table top (table horizontal): 740 mm Min. distance spindle nose–table top (table horizontal): 230 mm Max. distance spindle nose–table center (vertical): 690 mm Min. distance spindle nose–table center (vertical): 180 mm Max. table load: 500 kg Main Spindle Spindle taper: SK40 Max. speed: 12,000 rpm Min. speed: 35 rpm Rated power (15 min. duty): 26.4 kW Rated power (30 min. duty): 22.0 kW Rated power (100% continuous): 15.0 kW Feeds Rapid traverse (X-/Y-/Z-axis): 52 m/min Rapid traverse (A-/C-axis): 18,000°/min Feed rates (X-/Y-/Z-axis): 52 m/min Feed rates (A-/C-axis): 9,000°/min Number of simultaneous axes: 5 axes Indexing time (A-axis): 1.1 sec / 90° Indexing time (C-axis): 1.1 sec / 90° Table Table diameter: 630 mm Csdpfoxxzygsx Ab Tsrk Table width: 500 mm Number of T-slots: 5 T-slot spacing: 100 mm Table height: 950 mm Tool Changer Number of tool stations: 30 Tool selection method: random, shortest-path Tool shank: SK40 Max. tool diameter (adjacent stations occupied): 80 mm Max. tool diameter (adjacent stations free): 125 mm Max. tool length: 360 mm Tool change time (chip-to-chip): 3.6 s Dimensions Length x width: 4125 mm x 2495 mm Height: 3235 mm Weight: 13,500 kg

Condition: used, machine/vehicle number: 4943009, Year of construction: 2020, operating hours: 3,057 h, load capacity: 2,500 kg, enginetype: Electric, manufacturer: Jungheinrich Cedpfow Tkbdex Ab Tork

Condition: ready for operation (used), Year of construction: 2008, Technical data: Product number: RA 0305 D Crjdpfxoxdvpyj Ab Tjk Year of manufacture: 2008 Motor power: 7.5 kW Capacity: 300 m³/h Max vacuum: 0.4 mbar Noise level: 74 dB Rotational speed: 1,500 rpm Weight: 250 kg Dimensions [H x L x W]: 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, as confirmed by the measurement on the sensor shown in the video below. The reading 4.3 -1 on the sensor display indicates a vacuum of 4.3 × 10⁻¹, which equals 0.43 mbar. After a complete overhaul The pump is in perfect condition. New oil New oil filter New exhaust separators Oil-lubricated vacuum pump, suction pump – a device used in engineering applications for extracting gases (creating negative pressure) in a sealed space. Pumps are categorized by their operating principle: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic. The most important parameters of vacuum pumps are: • Final pressure (the lowest pressure attainable with the pump) • Pumping speed and the dependence of this speed on pressure • Throughput (typically measured in m³ of extracted gas per unit of time)

Condition: new, functionality: fully functional, machine/vehicle number: 12312572, empty load weight: 690 kg, maximum load weight: 1,310 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2025, Loading dimensions approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload may vary depending on additional equipment) Manufacturer: Debon Features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery powered) - Charging contacts integrated in the frame profile (12V / suitable for chargers) - 6 lashing eyes on the loading floor - H-frame (installed / removable) - 300 mm aluminium side wall extension (foldable / removable) - 300 mm aluminium side walls (foldable / removable) - Vehicle documents included Additional equipment - Base plate: galvanized steel sheet on phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball-type coupling | Automatic heavy-duty jockey wheel Electrics Crsdpfoi R Hwmsx Ab Tek - 12 Volt | 13-pin plug | Fog lamp | Clearance lights If you wish to purchase this trailer or have further questions about trailers, please use our internal tipper trailer number "12312572".

Condition: new, Coolant mixer Make Hebro type ND 2305 unused in closed original packing flow rate at 4 Bar/20 L/min. Cjdjh D Rytspfx Ab Terk 2 Bar 14 L/min

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,676 h, General Data Measurements width 5100 mm Crodsxvfitopfx Ab Tsk Measurements depth 5800 mm Measurements height 3400 mm Machine weight 17000 kg Control Unit Brand MAZATROL Model Matrix This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1998, sheet width 3050 mm Codpfxjxwzc Ee Ab Tjrk plate thickness 12 mm distance between columns 3120 mm back stop - adjustable 20 - 750 mm true cutting angle adjustable 0,5 - 3,0 Grad cutting length 300 - 3000 mm connected load 22 kW weight of the machine ca. 10,5 t dimensions 4,1 x 2,3 x 2,1 m Hydraulic guillotine shears with: - Digital display for back gauge - Cutting gap adjustment - Cutting length adjustment - Emergency stop device - Angle stop and front sheet metal supports - 3 sets of spare blades - foot switch - documentation

Condition: used, Year of construction: 2005, machine/vehicle number: ZEF112TEN5LA03050, Power: 138 kW, operating weight: 31,600 kg, with quick coupler system, operating hours: approx. 10,990 h Codpfoxua Twjx Ab Terk

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Crjdpfsr Drcmsx Ab Tok Travel paths: X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: new, functionality: fully functional, machine/vehicle number: 12311666, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2025, Product information "Debon rear tipper DK 155x305cm 2.0t|E-pump|Promotion" Tipper with e-pump The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high. With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets. Convenience is a top priority The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized. If required, a 60 centimeter high lattice extension can be supplied as an option. Special features Double-walled anodized aluminium side walls Rear tipper with electric pump + battery Heavy-duty jockey wheel Further equipment Removable drop sides, folding Stable screen-printed floor / sheet steel floor on the floor plate Axle and drawbar completely hot-dip galvanized Cedpoi R Hvhjfx Ab Tjrk 6 tie-down points in the floor 12 volt electrics, 13-pin plug with reversing light Frame welded and completely hot-dip galvanized. Other documents Vehicle registration certificate part 2 / Accessories available at extra cost - see below - If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1666".

Condition: excellent (used), machine/vehicle number: FN577577, Year of construction: 2018, operating hours: 5,638 h, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, battery capacity: 775 Ah, battery voltage: 80 V, Lifting capacity: 3.000 kg Cjdpfx Abexm U A Do Tork Technical condition: very good Visual appearance: very good Please contact PEDRO GÓMEZ for more information

Condition: used, Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Codjrrxc Sspfx Ab Terk For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,350 kg, driver cabin: other, Vehicle location: in transit, Body: interchangeable system, combined spreader 5 m³ and dry material container approx. 6,600 l, approx. 5 m³ Crjdpfexv D Uhex Ab Tok Wet salt tank 1,720 l, 3 x brine tanks of 1,650 l each, total approx. 6,670 l All information subject to change as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE – subject to change, prior sale, and errors!

Condition: excellent (used), mileage: 842,889 km, power: 279 kW (379.33 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2003, = Additional options and accessories = - PTO (power take-off) = Notes = YV2J4CMC33B336027 4x hydraulic + 1 manual = Further information = General information Year of manufacture: May 2003 Registration number: BN-JJ-80 Axle configuration Maximum front axle load: 9,000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 17,990 kg Payload: 9,000 kg Gross vehicle weight: 27,000 kg Functional Mast: Telescopic (5 sections) Crane: Yes Bodywork brand: EFFER 430 Condition Technical condition: Very good Visual condition: Very good Further information Contact Sales for more information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the given information. Office phone: MOB: (Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: (Dutch) Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify payment details on our website. If you receive different information, please contact us immediately. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Crjdjwypfiopfx Ab Tsk Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Cjdpfx Aboxta Uxs Tjrk Side stops and table extensions Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Weight approx. 6500 kg

Condition: used, Year of construction: 2022, operating hours: 1,069 h, machine/vehicle number: 132117, Good day. For sale is a Nordair Premium ZTP 1305 SD compressor. The compressor is in good used condition and has 1,069 operating hours. Free air delivery: 1.305 m³/min Operating pressure: 10 bar Motor speed: 1,125 rpm Motor power: 7.5 kW Crsdpfxexvqpls Ab Tok

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Crsdpfxek Ablps Ab Tek With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics