Used Pot Band for sale (4,350)

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Fedpfxsymcrbo Aa Ejpd

Condition: used, Storage location: Sonnefeld Fpedpjway Dcsfx Aa Esd

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Fodovvkd Tjpfx Aa Espd

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fpodpfx Aaevvkfdj Esd

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Fodpfx Aasvvkfqs Ejpd Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Fedpfxsvvkfwo Aa Espd

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Fpsdoxyiiljpfx Aa Ejd Storage location: Nattheim

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Fpjdpfewayzbsx Aa Eod

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Fodsvvkg Iepfx Aa Eopd

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Fpjdjwl D S Ujpfx Aa Eod

Condition: used, mileage: 212,440 km, power: 294 kW (399.73 HP), first registration: 10/2014, tire size: 13R22,5, axle configuration: 8x4, wheelbase: 1,800 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2014, Equipment: electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Axle configuration Tyre size: 13R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Fodpowd Sv Eofx Aa Eopd Weights Empty weight: 16.235 kg Carrying capacity: 15.765 kg GVW: 32.000 kg Functional Make of bodywork: LIEBHERR

Year of construction: 2016, condition: excellent (used), 1 x ROKK Pot Filler Model: RR 3800 Year: 2016 With Domino Printer for dating coding Fodpfxoyn Rgcj Aa Ejpd Has been regularly serviced. Comes with change parts for 120ml and 500ml pots

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically operated, double-column guided horizontal band saw automatic Technical Data: - Cutting range at 90° round: 260 mm - Cutting range flat: 260 x 260 mm - Automatic material feed max. single stroke: 600 mm - Max. cut length in multiple strokes: mm - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Cutting speed steplessly adjustable: 12 - 100 m/min - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping with clamping pressure regulation - Coolant device - Chip conveyor Fpodpfx Aajyn Ikro Eod - Total drive power: 400 V / 8.5 kW - Required floor space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 3000 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm Fpedpoq Evn Eefx Aa Esd - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 1102458, Offer 26078 Hydraulic double-column guided horizontal band saw automatic Technical data approx.: - Control for fully automatic operation - (Feed, cutting speed, automatic feeder, etc.) - In separately standing control panel - Cutting range at 90°: round 260 mm - flat 300 x 260 mm - Minimum workpiece dimensions round / flat: 15 / 10 x 15 mm - Minimum cut-off length: 10 mm Fpodpfx Ajyn If Aja Esd - Remnant piece length in automatic / manual mode approx. 130 / 40 mm - Saw blade dimensions: 4400 x 34 x 1.1 mm - Steplessly adjustable cutting speed: 20 - 140 m/min - Steplessly adjustable cutting pressure: 0 - 10 m/min - Hydraulic workpiece clamping with clamping pressure regulation - Coolant device - Total drive power: 400 V / 8.0 kW - Required space approx.: W 2700 x H 1600 x D 2450 mm - Weight approx.: 1800 kg - Roller conveyor: 2000 mm

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Fedpjvzlgaofx Aa Espd Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, cutting height (max.): 260 mm, actuation type: manual, Equipment: CE marking, Description Offered here is a robust metal bandsaw, model HESKA HES 260. The machine comes from our workshop inventory and has been regularly used. It is a classic, solidly built metal bandsaw meeting German industrial standards. Ideal for workshops, metal fabrication, maintenance departments, or small production facilities. Technical Data Fpodpfx Aaeyn D R Ue Esd - Manufacturer: HESKA Maschinenfabrik GmbH - Model: HES 260 - Max. blade length: 3,660 mm - Year of manufacture: 1996 - Manual clamping device - Equipped with coolant system - CE-compliant version Condition - Used - Complete - Normal signs of use - Fully operational Commercial Note The price includes VAT, and an invoice with VAT can be issued! Machines of this type are extremely durable and require minimal maintenance. The listed price allows for an economical entry into a solid metal bandsaw, significantly below the price of modern new machines. The sale is made under exclusion of any warranty and liability for material defects. The machine is sold as seen.

Condition: excellent (used), Stainless steel version, Length: 1400mm Width: 1200mm Fjdpfx Aaohvyzwo Ejpd Height: 1900mm Weight: about 250kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Fpsdpfoynzm Tox Aa Ejd Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 46/2, type of input current: three-phase, total length: 920 mm, total height: 1,500 mm, total width: 450 mm, Machine for banding printed materials or cartons with foil tape. Includes 6 rolls; the machine is mounted on a mobile base. Very robust construction (see photos). The technology is easily accessible. Banding area approximately 33 cm wide and 17 cm high, operation via foot switch. Fpjdpfexb Ufzsx Aa Eod Delivery includes 16 rolls of polypropylene banding tape, 50 mm wide, 1,100 linear meters, 35 micron, valued at €350.

Condition: new, For technical specifications, see the PDF file. Fpjdpfx Ajxp H Drea Eed

Condition: new, For technical specifications, see the PDF file. Fjdpfxjxp H H Ho Aa Eepd

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Fjdpfod Du T Isx Aa Eepd Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, Fastech Horizontal Double Miter Band Saw Semi Automatic BMSY 440 DGH Round cutting range: mm 440 Flat Cutting range: mm 610 x 440 Square Cutting range: mm 440 +30 ° Round Cutting range: mm 400 +30 ° Flat Cutting range: mm 500 x 440 +30 ° Square Cutting range: mm 440 +45 ° Round Cutting range: mm 440 +45 ° Flat cutting range: mm 410 x 440 +45 ° Square cutting range: mm 410 +60 ° Round Cutting range: mm 320 +60 ° Flat cutting range: mm 250 x 440 +60 ° Square cutting range: mm 250 -30 ° Round cutting range: mm 440 -30 ° Flat cutting range: mm 500 x 440 -30 ° Square cutting range: mm 410 -45 ° Round Cutting range: mm 410 -45 ° Flat cutting range: mm 410 x 440 Fpodpjhpil Esfx Aa Ejd -45 ° Square cutting range: mm 410 -60 ° Round cutting range: mm 320 -60 ° Flat cutting range: mm 285 x 440 -60 ° Square cutting range: mm 285 Engine power main drive: kW 3 Hydraulic pump power: kW 0,55 Engine power coolant pump: kW 0,12 Belt speed: stepless m/min. 20 - 100 Saw band dimensions mm 5200 x34 x 1,1 working surface height: mm 860 weight: kg 1540 length / depth / height: mm 2800 / 1210 / 1870 Double miter saw Infinitely variable band speed, hydraulic vice sensitive cutting pressure regulation High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for miter angle

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Fodpfoqzhxijx Aa Eopd Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors