Used Portal Cnc Machine for sale (66,787)

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Iodpfx Aszmyzfsm Hotl

Condition: good (used), Year of construction: 2003, CNC - lathe machine Machine type: DMG CTX 410 V1 Control: Heidenhain CNCPilot 4290 Year: 2003 Working hours: 11.080 h SPECIFICATIONS Max. swing over slide: 365 mm Turningdiameter: 420 mm Bar capacity: 67 mm Max. turning length: 600 mm Spindle speeds: 25 - 5.000 rpm Spindle power: 28 / 21 kW Travel X-Axis: 250 mm Z-Axis: 600 mm Tool capacity: 12 Tool: VDI 30 Tailstock Iedpfx Ajz Dkt Rjm Hstl Equipment Chip conveyor

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Itsdpjzrvvvofx Am Hjl

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Isdpfjx D Tbmsx Am Hetl Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Ijdexk Tumepfx Am Hjtl

Condition: used, Year of construction: 2014, Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Isdex Hwhxjpfx Am Hstl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control Andronic 3D path control with Ethernet interface Itjdjzwudijpfx Am Hol Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5,000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3,500 kg Price: Euro 4,500.00 (plus VAT), ex works.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Itsdpfoz A Ia Sjx Am Hol Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 21032017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance Z-axis: 200 mm, table length: 3,100 mm, table width: 2,100 mm, For sale: CNC milling plotter from Polska Grupa CNC. In continuous operation, ready for immediate use. Used for machining chipboard, MDF boards, kitchen countertops, and compact countertops. A used vacuum system (vacuum pump with reservoir) is also included with the plotter. Key information and technical condition: Model: 2030 Special Year of manufacture: 2017 Power: 8kW Spindle power: 5.5kW Spindle: Brushless electric spindle, liquid-cooled in a closed system Spindle speed: 6000 - 24000 rpm Power supply: 400V (3 phases) 50Hz Working area: 2100mm x 3100mm Z-axis range: 200mm Condition: very good, ready for immediate use Usage history: operated in a single-shift mode, 8 hours per day. Iodpfozvykrsx Am Hstl

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Itjdpjz A Aw Sofx Am Hsl

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The CNC AUER Unicapp woodworking line is fully functional for standard carpentry tasks, and it can process KVH and BSH lumber in full lengths (13m). A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. The maximum working height with the width of the processed lumber is 26/24 cm. The machine features a miter saw, mortiser, drill, saddle milling machine, rabbeting and tenoning cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. The total length of the machine is 21m, and it requires a main circuit breaker of 3x50A. Technical data: AUER UNIKAPP – woodworking machining line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau (Austria)) Type: UNIKAPP Category: Woodworking processing center (woodworking line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Total number of units: 5 Sawing units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feed: using clamping grippers (sliding carriage with pneumatic/hydraulic clamping) Itedpfjzz Tv Eex Am Hel Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a woodworking line for processing beams/roof trusses – it combines a saw for cross-cutting and mitering, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using gripper jaws along the entire length of the beam with pneumatic clamping. The configuration with 5 units and a 30kW power consumption corresponds to a medium-sized line for smaller carpentry operations (max. beam profile approximately 280x160 mm). If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Itjdpfxswym Nfo Am Hel Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe Iodpozbvqgofx Am Hotl - Chip conveyor, left side - Coolant gun

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 20210330-2, control type: CNC control, pipe diameter (max.): 63 mm, pipe length (max.): 2,600 mm, bending angle (max.): 190 °, bending radius (max.): 350 mm, bending radius (min.): 25 mm, overall weight: 3,000 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 1,350 mm, CNC 63CNC AUTOMATIC MANDREL BENDING MACHINE – FOR TUBES AND PROFILES For sale: CNC 63CNC automatic mandrel bending machine, designed for precise bending of tubes and profiles. The machine is equipped with CNC/PLC control with a touchscreen and the ability to save bending programs. TECHNICAL DATA: Itedpfx Amozy Rgxs Hel -Maximum diameter / material dimension: Ø63 × 4 mm -Bending radius: 25–350 mm -Bending angle range: 0–190° -Effective length on the mandrel: 2600 mm -Motor power: 7.5 kW -Maximum pressure: 160 kg/cm² -Machine dimensions: 5000 × 1200 × 1350 mm -Weight: approx. 3000 kg EQUIPMENT AND FUNCTIONS: -PLC control with touchscreen -Automatic and manual mode -Diagnostic system -Full hydraulic clamping -Up to 100 programs, each with up to 20 bending operations -Independently programmable speeds of axes Y, B, and C -Programmable material springback compensation -Automatic release of the tube before final bending -Cycle start via foot pedal -Air cooling The machine enables repeatable, precise bending and is designed for production applications where efficiency and process repeatability are essential. Transportation is the buyer's responsibility.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 Iedpfxezacwdj Am Hstl - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, Year of construction: 1998, Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Isdpfxozw A D Dj Am Hotl Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Iedpfx Aevt Dwbom Hetl Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Iedpfxeytcl Ie Am Hotl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Ijdpfxjqwgzbs Am Hjtl Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Itjdpfx Ajyymz Uom Hol Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Itjdpezu T Smefx Am Hsl Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Itodpsm Dtnrefx Am Hol Pallete changer EROWA not come.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. Iodpfx Amjxdmgvs Hjtl The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22 Isdpfsr E D Eaox Am Hotl

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Itsdpezfv T Iofx Am Hol Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)