Used Portable Band Saw for sale (9,694)

Year of construction: 2019, operating hours: 1,650 h, condition: ready for operation (used), Additional Equipment Spray unit capacity: approximately 12 liters / Hydraulic oil capacity: approximately 5 liters / Coolant capacity: approximately 180 liters This MEBA MEBAmat 434 Metal Band Saw was manufactured in 2019. It features a band saw drive power of 7.5 kW and a cutting speed of up to 150 m/min. The machine can handle round material up to Ø434 mm and square material up to 434 × 434 mm. Weighing approximately 4000 kg, it's designed for robust performance with a hydraulic clamping system. If you are looking to get high quality cutting capabilities consider the MEBA MEBAmat 434 machine we have for sale. Contact us for more information. Chsdpfxoxwfn Sj Ab Tjf Application Types Sawing

Condition: good (used), Bandsaw BU-801 - Year of manufacture: 1983 Chsdpjxwdx Nefx Ab Tjf - Sturdy cast iron machine - Heavy-duty grey cast iron table: 1200 x 900 mm - Dimensions: 2400 mm x 1500 x 1300 mm - Throat width: 750 mm - Cutting height: 550 mm - Blade width: 45 mm - 4 kW - Weight: 880 kg

Condition: used, Year of construction: 1994, cutting diameter 260 mm saw band length 4310 x 27 x 0,9 mm table height 810 mm Chodorl U Nmepfx Ab Tof cutting speed 17 m/min total power requirement 3,2 kW weight of the machine ca. 920 kg dimensions of the machine ca. 2,5 x 1,7 x 1,5 mm

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Codpfx Asmrnk Esb Tehf The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Manufacturer: KASTO Cjdpfxexcnppe Ab Tjhf Model: SSB 260 VA Max. cutting size: 260 x 260 mm / Diameter: 260 mm Weight: 1915 kg

Condition: used, Year of construction: 2019, functionality: fully functional, Main motors: 2 x 7.5 kW Feed motor with reducer: 0.75 kW Csdpfxexyhz Te Ab Tshf Max. working width: 500 mm Max. edging thickness: 80 mm Min. edging thickness: 7 mm Min. board length: 800 mm Weight: approx. 1700 kg Infeed table: 3 m + 2 m Stepless feed, longitudinal draw chain and upper pressure rollers, hydraulic pump, mechanical self-adjustment of upper pressure rollers according to board thickness, 2 saw heads that can move independently or synchronously, 2 lasers for easier positioning of the saw heads, electronic control Unitronic with Mebor program, various accessories (batten head, saw blades, etc.)

Condition: excellent (used), Working width: 30 cm Working height: 46 cm Chsdpfx Aewy Ruxob Tjf Wheel diameter: 1.1 m

Condition: excellent (used), Year of construction: 2011, Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Chodpfxexyd Szj Ab Tjf Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm Csdpfx Asiqp Erob Tshf cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Csdoudi Uzjpfx Ab Tohf Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: good (used), Table size: 900x900mm Cjdpfx Ajlgvk Ajb Tohf Projection: 630mm

Condition: used, Year of construction: 2008, functionality: fully functional, Used fully automatic band saw from the premium manufacturer Behringer. The saw was only recently purchased but is unfortunately much too large for our applications. Description of Behringer HBP 413A Machine Description: Behringer HBP413A High-Performance Band Saw Machine The Behringer HBP413A automatic band saw is an efficient metal bandsaw for automated 90° cuts, suitable for professional use in industrial and trade production environments. Codpoxdc Snofx Ab Tjhf The HBP413A automatic band saw has a round cutting range from 10 mm to 410 mm and a flat cutting range from 10 x 8 mm up to 500 x 400 mm, with a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled band drive provides a motor power of 4 kW and offers a steplessly adjustable cutting speed from 20 – 140 m/min (66 – 459 ft/min). The cutting speed can be set and read out directly on the control panel. The total drive power is approx. 7 kW. Weight: 2,350 kg Dimensions (L x W x H): 1,950 x 2,950 x 2,550 mm Saw blade dimensions: 5,800 x 41 x 1.3 mm Round cutting capacity: 10 - 410 mm Flat cutting capacity: 500 x 400 mm Cutting speed: 20 - 140 m/min Saw feed control Saw frame adjustment The machine is available immediately. It has only 4,800 operating hours and is currently being completely overhauled by Behringer. All wear parts, carbide guides, new bandsaw blades, as well as parts of the electrical system and hydraulics have been replaced at a cost of nearly €4,000. Original invoices from Behringer are available.

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Chodpjxx Uxijfx Ab Tjf

Condition: as good as new (ex-display), Used block bandsaw CTR520, demo machine at a special price, for logs up to 63 cm diameter, manual cutting sequence, highest cutting accuracy, height adjustment via hand crank, fitted with bimetal saw band for all wood types, max. log diameter 600 (520) mm, max. board width 460 mm, motor output S1 4 kW, standard cutting length 3.6 m, saw band 3110 x 27 x 0.9 mm, extension section cutting length 2.25 m, weight 218 kg, CE, 3 kW S1, 218 kg. Extras not included in price. (Sample image) Codpfx Abjvrvq Ro Tshf

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 2650 mm Measurements depth 3350 mm Measurements height 2160 mm Machine weight 1800 kg Cjdpfxjxvtzqj Ab Tshf This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine. Application Types Sawing

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Angle-adjustable machine table Cjdpfexx I H Tsx Ab Tshf Cutting speed 16 - 2200 m/min Very well maintained condition

Condition: used, Make: MÖSSNER record Type: SSF /950 Design: 950mm Chjdpfx Aovtyv Heb Tof Table size: 800x750mm

Condition: excellent (used), Year of construction: 2012, Eismo - Ergonomic model 290.250 DGA - 2-axis automatic band saw 2 working axes Siemens Simatic numerical control roller infeed conveyor (6 m x 0.65 m) with 2 new saw blades Excellent condition Location - Poland Cedpfsupht Isx Ab Tjhf

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Chedoxbhm Sepfx Ab Tof

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Chjdpfx Asvrvqwob Tsf Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 5780515, Metora VMB280 hacksaw with automatic feed • Cutting capacity: up to 280 mm • Cutting angle: 90° and adjustable up to 45° • Automatic feed: adjustable, hydraulic feed for consistent cutting quality • Motor power: 1.5 kW • Cutting speed: 20 - 100 m/min (steplessly adjustable) Chsdpfx Aexxxubjb Tef • Weight: approx. 800 kg • Includes roller conveyor for 3 meters • Saw blade installed

Condition: excellent (used), Vertical bandsaw in technically excellent condition, featuring a robust construction and high cutting capacity. Ideal for precise cuts even on larger workpieces. Technical data: • Flywheel diameter: 600 mm • Flywheel speed: 820 rpm • Motor power: 3 HP / 2.2 kW • Cutting height: 370 mm • Cutting width: 580 mm • Table size: 600 × 875 mm • Blade length: 4,520–4,600 mm (blade width 35 mm) • Extraction port: 2× Ø120 mm • Machine dimensions (L×W×H): 1000×790×2000 mm • Weight: 280 kg Condition: – Technically tested and fully operational – Ready for immediate use – Operating video available upon request – Inspection possible at any time Shipping available! Cjdpfxoxxxt Rs Ab Tehf

Condition: good (used), Good working condition. Codpfx Abexvnh Ss Tshf

Condition: used, Block bandsaw Pilous CTR520, good condition, cutting length 5.8 m, max. log diameter 550 mm, 4 kW S1, cutting length 3110 mm, weight 310 kg Chedpfx Ajwzzhreb Tjf Price changes and errors, misprints and typographical mistakes reserved.

Condition: good (used), Year of construction: 2012, Band saw is in good working condition. Csdpfxoxvnh Ej Ab Tjhf