Used Polishing Tube for sale (3,757)

Condition: used, tank capacity: 9,140 l, GENERAL Equipment: Crane lugs Rsdpfx Aeyck Ddjdaen Construction type: Suspended Remarks: Maximum operating pressure heating coil 35 bar; 3 legs, steel; Manhole diameter approx. 490 mm; several external components made of steel, e.g. manhole cover flange and insulation rings around the cylinder Internal diameter: 1,990 mm Total height: 3,750 mm Heating/Cooling: available Max. permitted operating temperature: 242 °C Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 9,140 liters Double jacket volume: 219.0 liters Cylinder wall thickness: 6.3 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,400 mm Last application: Processing of wool grease VESSEL Max. permitted operating temperature: 200 °C Base type: On support legs HEATING/COOLING JACKET Internal temperature control: Full pipe coil EQUIPMENT Manway/Hatch: In the cylinder Outlet: 160 mm Remark: Outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.1 mm Top wall thickness: 6.3 mm

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Rjdeyfph Hepfx Adaen Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Redpfx Adevtpgheaen Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Rodpfx Aoyfn Nvodajn Tube feed length: 4500 mm Machine weight approx.: 0.11 t Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Tube diameter: 168.3 x 11 mm Insert length of tube: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Rsdpfx Ajyfnu Ejdajn Connected load: 400 V / 50 Hz / 85 A Dimensions (L x W x H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection rating: 400 V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Tube Ø 48.3 mm; Radius 105 mm Tube Ø 60.3 mm; Radius 120 mm Tube Ø 63.5 mm; Radius 150 mm Tube Ø 76.1 mm; Radius 190 mm Tube Ø 88.9 mm; Radius 222 mm Tube Ø 114.3 mm; Radius 285 mm Tube Ø 139.7 mm; Radius 350 mm Tube Ø 141.3 mm; Radius 700 mm Tube Ø 168.3 mm; Radius 420 mm There were a few mandrels with a marking engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approx. €150,000.

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Redpfeyfnblex Adaen Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Condition: refurbished (used), Year of construction: 2008, operating hours: 20,000 h, functionality: limited functionality, total length: 12,000 mm, total width: 11,000 mm, input voltage: 400 V, pressure: 8 bar, air pressure: 8 bar, input frequency: 50 Hz, type of input current: three-phase, power: 60 kW (81.58 HP), Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Redpsxxaitofx Adasn

Condition: used, Year of construction: 2021, MARINI-ERMONT TSM17 asphalt plant drum tube: Drum thickness: 10mm, Cone thickness: 12mm, Large end diameter: 2,100mm, Drum diameter: 1,700mm, Length approx. 11,000mm, 2 bearing rings, Radiation-proof blades in A42CP steel, Curtain blades: HARDOX 400, Recycling ring, Burner face, 4 gear motors IE3 standard + rollers. The tube was commissioned in January 2022 and decommissioned in November 2023. Rjdpfx Ajxf T Ucedaon

Condition: new, The RAX Tube End Finishing Machine from KNUTH is a motor-driven notcher designed for efficiently notching tubes made of steel and non-ferrous heavy metals. With its compact footprint, this versatile machine can accommodate various tube diameters ranging from 1/4" to 2", ensuring high productivity and low operational costs. The RAX operates with a powerful 1.5 kW main drive motor and is capable of cutting plate thicknesses of up to 3 mm, delivering clean cuts that require no rework. It's simple to use and can handle multiple tube sizes instantly, enhancing your workflow. You can easily operate this machine with standard 230 Volt connectivity. To learn more about how the RAX can benefit your tube processing, request a quote today. This robust notcher stands out in the Tube End Finishing Machines category, making it an essential addition to your Tube and Profile Processing solutions. Rjdpfxowhkf Tj Adajn

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Rodpfouzlh Iex Adaon

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) Rodpfx Adottah Roaon → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine Rsdpfx Ajg Dvdcsdaen

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany Redpfx Adsx Ebzqsaen The pictures show you an older bigger machine

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system Rjdpfx Ajxv Aacjdaon 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. CP182A-X2 (outlined in red) Machine control panel with pedal and programmable board - ordered new from supplier in Lithuania CP4024A (outlined in green )Machine tool side supports, to guide the workpiece, to roll the spiral. Left and right sides, complete set - ordered new from supplier in Lithuania. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Rodpfxexdnx Hs Adaon Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies

Year of construction: 1998, condition: repair required (used), Manufacturer: LOH Model: SPS 120 SL Rsdpox Hygkefx Adajn Year of manufacture: 1998 The device is not working, the program cannot be loaded.

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Equipped With: Rjdeyanv Sepfx Adasn Per RD 17/06/25 updated description & raised price.

Year of construction: 2026, condition: new, functionality: fully functional, ROBO CLEAN Robot for cleaning and polishing fused silica rollers for glass tempering furnaces * Fully automatic 2-hour cleaning cycle Redpfxeyanp Ee Adaon * Use of the same robot on multiple furnaces of different widths and types * Improved tempered glass quality * No risk of roller wear * No need to use water

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Rsdpfxeuluhws Adasn Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C-13-309-02, input voltage: 400 V, overall weight: 900 kg, Take the opportunity to purchase a high-quality used Carat grinding & polishing station: This set consists of a control cabinet and two precision polishing machines, equipped with robot connection for maximum efficiency. Ideal for professional applications in the industry. Matching robots can be offered separately. Year of construction: 05.2013 Total height: 240 cm Air pressure: max. 6 bar Rated current: 11.5 A Rsdpfeuzyctex Adaon Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Neat pedestal polishing machine with integrated extraction. Recommended disc diameter: 250-300 mm Rjdpfx Aoyc Urredaen Speeds: 1450/2900 rpm Power: 0.9/1.3 kW Shaft diameter: 20 mm Maximum clamping width: 30 mm

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180° Rsdpfx Asxcqi Esdasn

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg Redpfx Ajwrt Tzodaen

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head Rsdpfxjwrt Tus Adajn no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: ready for operation (used), machine for expanding and reducing tubes Rjdpfx Aswrt Tnjdajn 2 heads