Used Pneumatic Screwdriver for sale (7,064)

Condition: used, New: Yes Empty weight: 2 kg Part suitable for: trucks V4800 Pneumatische slagmoersleutel 1/2" Maximaal koppel 1200.0 Nm Werkdruk 6.3 bar Luchtverbruik 184.0 l/min. Sleutel lengte 185.0 mm Gewicht 2.1 kg Snelheid van omwenteling 7500.0 omw./min. Luchtinlaat 1/4 inch Article nr.: VIGORV4800-veiling Pneumatic impact wrench 1/2" 1200NM Iodpfx Ajxhzhvjfiotn

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm Itsdpfexg I Slsx Afien • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: new, functionality: fully functional, power: 485.43 kW (660.00 HP), fuel type: diesel, color: silver, fuel: diesel, brakes: retarder, gearing type: automatic, Equipment: ABS, spoiler, 🇬🇧 SCANIA 660 S V8 FULL AIR SUSPENSION 4+2 * BRAND NEW FROM FACTORY * AVAILABLE FOR IMMEDIATE DELIVERY * TO BE REGISTERED - 0 km - Full air suspension - Retarder - Full paint finish - Twin bunks - Stationary air conditioning - LED headlights - Navigation system - V8 interior trim - Reversing camera - Digital dashboard - Refrigerator - Alloy wheels CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES OFFICE DOMENICO ESPOSITO S.P.A., EBOLI (SA) OFFICE - AUTHORIZED DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 am / 7:00 pm - SATURDAY 8:30 am / 2:00 pm Iedpfoxg Iv Dsx Afietn WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz - Isuzu - Flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Curtain side - Box - Tail lift - Refrigerated cell - Insulated with fridge - Box van Domenico Truck srl accepts no liability for any discrepancies regarding technical specifications, optional features, or characteristics that may differ from those stated in the description. We recommend checking the details of the specific vehicle.

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Itsdpfjfv Awaox Afisn Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: excellent (used), functionality: fully functional, CATALOGUE NUMBER 7559 TECHNICAL DATA - loading fields 2 - manually adjustable side clamps 2x4pcs - vertical pneumatic clamps 2x4pcs - max length of glued elements 3300mm - max height of glued elements 1020mm - max thickness of glued elements 100mm - dimensions length/width/height 4270x1600x2000mm - weight about 800kg ADVANTAGES - two working fields Itsdpfov Dirxox Afisn - gluing length 3300mm - pneumatic actuators - used press, very good condition Net price: PLN 10900 Net price: EUR 2570 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 2022, condition: new, pneumatic tapping arm Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Ijdpfoipmr Isx Afietn Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: used, Pneumatic gripper feeder, strip feeder FESTO type BV 50-40 Material feeder for strip material from coil or as bar feeder Feed length: max. 70 mm Strip width: max. 100 mm Sheet thickness: max. 1.5 mm Feeding force at 6 bar: 400 Newton Return force at 6 bar: 320 Newton Itodjxddwxopfx Afisn Clamping force at 6 bar: 1300 Newton - The feeder was used for approx. 70 mm strip width - Supplied without control system and external valves Compressed air requirement: 3-6 bar Weight: 6 kg In good condition

Condition: used, Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without a pressure shoe. pressing surface: approx. 2,800 x 1,000 mm Pressing surface: approx. 2,800 x 1,000 mm press cylinder: 6 Itodpfx Afjviwqmeien

Condition: new, functionality: fully functional, power: 485.43 kW (660.00 HP), fuel type: diesel, color: white, fuel: diesel, brakes: retarder, gearing type: automatic, suspension: air/air, Year of construction: 2025, Equipment: ABS, spoiler, SCANIA 660 S V8 FULL AIR SUSPENSION 4+2 *FACTORY NEW Itodpfxsxgiq Ne Afijn *IMMEDIATE DELIVERY *TO BE REGISTERED - 0 km - Full pneumatic system - Retarder - Full body paint - Double bunk - Standstill air conditioning - LED headlights - Navigation system - V8 interior trim - Reversing camera - Digital dashboard - Refrigerator - Alloy wheels OPTION FOR CUSTOMIZED FINANCING OR LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES BRANCH DOMENICO ESPOSITO S.P.A. – EBOLI (SA) BRANCH (OFFICIAL DEALER) MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – 4 Axles – Rear 4 Axles – Tway – T-Way-540- 460 HP – Xway – X-Way – Three-Way Tipper – V8 – Scania – Frost Edition Curtainsider – Box – Drop-side Loader – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines any responsibility for possible discrepancies in technical specifications, equipment, and features, which may in some cases differ from what is described. We invite you to verify the characteristics of the specific vehicle.

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings Itjdpfxsfv Av Sj Afion • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: excellent (used), CATALOGUE NUMBER 6933 TECHNICAL DATA - loading fields 1 - from the front manually adjustable clamping beams 6 pcs - from the top pneumatic pressure beams 4 pcs - length of each pressure beam 795 mm - from the side pneumatic clamps 2 pcs - max length of glued elements 3300 mm - max height of glued elements 1300 mm - max thickness of glued elements 170 mm - dimensions length/width/height 4200x800x1960 mm - weight 820 kg ADVANTAGES - Polish production - mobile - unpainted - used press, very good condition Net price: PLN 23900 Net price: EUR 5620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change) Iodpjk Uxwwofx Afistn

Year of construction: 2023, condition: new, Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 25kg Adapter mounting: TCS 2B Model: R950-020 Power: M3-M20 Iodpfjipmpzox Afistn Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Standard accessories: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Iodpjxcp Iasfx Afiotn Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic)

Condition: ready for operation (used), Posco 500 Desoutter Easy Line Screwdriver Screwdriving System Itsdpfjxfzz Rjx Afion Year of manufacture: 2008 6 bar You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive an official invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. The mentioned company names and trademarks are property of their respective owners and are used solely for identification and description of the products. Deviations from the technical specifications as well as errors in the item description may occur and are reserved.

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, Itsdpfxsva Nq Hj Afijn - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm Iodpfx Afju D Tz Usietn - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, We have been manufacturing pneumatic conveyors for over 20 years, designed for the transport of bulk materials such as seeds, grain, peas, corn, the conveying of wood pellets (such as pellet, sawdust), plastic granules, sand, abrasive powders (including even corundum), and steel fibre reinforcement for concrete mixers or within batching facilities, among others. Our systems can also be used for aerating a variety of materials, including hay, cereals, herbs, and more. They are ideal for providing fresh air to production halls, poultry houses, and cowsheds, as well as for extracting smoke, dust, and hazardous welding fumes. Flexible hose systems can also be used as needed. Key specifications: - High performance blower with 5.5 kW/400V motor - Robust, modular steel construction; pipes and bends made from 3.6 mm thick steel, enabling transport of even the most challenging materials while ensuring long service life - We also supply light and heavy flexible hoses for the above-mentioned materials - Easily transports material over long distances (distance depends on the material type) - High blower output ensures capability for both horizontal and vertical transport - Extensive experience in production, with machine segments bolted with M8 screws for easy replacement and versatile use On request, we can produce parts or the entire unit in a STAINLESS STEEL version (including pipes), or in galvanized finish. We apply the Kaizen method in production—Kaizen, meaning 'change for the better', is a management philosophy emphasizing continuous process and operational improvement. REPLIES ARE BEST SENT VIA E-MAIL In the standard version we sell only the blower with a flanged outlet to accommodate various pipe connections. We manufacture pipes and bends from 3.6 mm thick steel. Impeller speed: 2,800 rpm. (OPTION: with extensive electronic speed regulation, available from stock). The use of three-phase motor speed controllers offers multiple benefits, including energy savings, precise torque control, and improved overall system efficiency. Additionally, they reduce energy losses, positively impacting production performance. Our blowers are highly efficient. The machine is built from easily replaceable modular segments (joined by M8 bolts), which we always keep in stock, enabling versatile applications. All individual modules are also available separately (e.g., the blower only). We can adapt the construction to meet customer requirements. The blower is easy to transport—one person can easily move it, and it can be transported even by a small car, van, or trailer. Assembly and operation are straightforward. We also produce optional wheels to facilitate moving the unit (two types available). Net prices: - Basic set (without electronic speed control): 10,300 PLN (EUR 2,453) - With electronic speed control: 13,400 PLN (EUR 3,190) - Blower only, without feed hopper: 10,300 PLN (EUR 2,452) - Galvanized air splitter (2 pipe inlets/outlets, with flanges and fixing holes): 1,900 PLN (EUR 452) - Galvanized air splitter (3 pipe inlets/outlets, with flanges and fixing holes): 2,400 PLN (EUR 571) Itsdpew Aqamsfx Afien - Additional wide-range electronic speed controller: 2,900 PLN (EUR 690) For more information, please contact us by e-mail. We operate 24/7.

Condition: used, functionality: fully functional, mileage: 636,786 km, power: 397.17 kW (540.00 HP), first registration: 04/2022, fuel type: diesel, color: white, brakes: retarder, gearing type: automatic, Year of construction: 2022, Equipment: ABS, airbag, spoiler, SCANIA 540 S FULL AIR SUSPENSION 2+2 - First registration: 04/2022 - 636,786 km - Full pneumatic suspension - Retarder - Double bunk - Standstill air conditioning - LED headlights - Navigation system FINANCING OR CUSTOMIZED LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY–FRIDAY 8:30–19:00 – SATURDAY 08:30–14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500 – V8 – 650 – 580 – 730 – S500-S – S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed body – Crane – Tipper – 4 axles – Rear 4 axles – Tway – T-Way – 540 – 460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain side – Box – Tail lift – Refrigerated cell – Insulated van with fridge – Panel van Domenico Truck srl declines all responsibility for discrepancies in technical specifications, options, and features that may in some cases differ from what is stated in this description. We invite you to verify the specifications of the specific vehicle. Itjdpoxfbz Rsfx Afion

Condition: good (used), Year of construction: 1995, machine/vehicle number: 6194, Offer 22553 Itjdpfxjwp Haps Afien Technical Data: - Pressing force at 10 bar 35 KN - Ram stroke 12 mm - Throat depth 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air input 6 - 10 bar - Required space approx. W 520 x H 1250 x D 600 mm - Weight approx. 100 kg - with: - Foot pedal - Pressure gauge + regulator - 2 x punching tools

Condition: ready for operation (used), Schmidt 32-60 pneumatic press Toggle press Brand: Schmidt type: 32-60 Year of construction: 2010 Compressive force: 15 kN min/max operating pressure: 3/6 bar Stroke: 60mm Weight: 45 kg You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Isdpfx Afoqmmbisijtn A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Itjdpfx Afowqx H Reisn Very good condition

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm Iodpfx Afsvcdvpjiotn ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: new, functionality: fully functional, power: 368 kW (500.34 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 4,200 mm, brakes: intarder, gearing type: automatic, emission class: euro6, suspension: air/air, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, onboard computer, parking heater, retarder, Iveco Stralis S-Way 500 6x2 ADR Model Year 2024 Brand new, factory condition To be registered Ready for immediate delivery - Retarder: Intarder - 0 km - Full air suspension - Wheelbase: 4,200 mm - ADR: all classes - Stationary air conditioning - Double bunk - Navigation system - Alcoa alloy wheels - Third axle liftable and steerable FINANCING OR CUSTOMIZED LEASING SOLUTIONS AVAILABLE ONSITE. Isdpfxjwgy Hde Afietn OPTIONS FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A., EBOLI (SA) HEADQUARTERS - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 - SATURDAY 8:30/14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730 -Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-Trailer – Refrigerated Semi-Trailer – Lamberet - Schmitz - Isuzu - Fixed body – Crane – Tipper – 4 axles - 4 Rear Axles – Tway – T-Way-540 - 460 HP – Xway - X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain-sider – Box – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines all responsibility for any discrepancies concerning technical equipment, optional features, and specifications that may, in some cases, differ from those stated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Isdpfx Afetrpiijistn Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Itedpfx Aow A Srwofijn Good condition 2 units available, price per unit