Used Plasma Spray for sale (2,904)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: PB-VB 1555, Equipment: cabin, Spray booth dryer VENUS model PB-VB 1555 - Internal dimensions 15.0 x 5.0 x 5.0 m - Walls protected by easily removable white lacquer Kfjdet S Upnjpfx Affsa - Thermal insulation of walls (mineral wool 40 mm) - Motorized aluminum entrance gate (4.8 x 5.0 m), 2 pcs. - Service door, 3 pcs. - Operator lifting grates, carrying capacity 1,100 kg/m2 - Vertical ventilation, airfall velocity ~0.3 m/s - Supply ventilation and heating unit (capacity 45 000 m3/h, heating power / motor power 500 / 18.5 kW), heating medium gas or fuel oil, 2 pcs. - Exhaust generator (capacity 45 000 m3/h, motor power 18.5 kW), 2 pcs. - Heat recovery rotary recuperator (efficiency >50%), including support structure, 2 pcs. Heating power with rotary recuperators is 2 x 250 kW. - Air filtration: pre-filters + ceiling filters (~67 m2). - Two-stage air filtration at the outlet: 1. inert cardboard floor filters (~45m2) - pre-filtration; 2. non-woven glass filters in exhaust units - fine cleaning - Primary overhead lighting, 20 pcs. - Additional side lighting, 17 pcs. - Control cabinet

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm Kjdpfx Asxv Nk Uoffefa equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: excellent (used), functionality: fully functional, Dimensions: 4000 x 2000 mm Kodpfsxvygtex Affsfa Extraction fan power: 4 kW

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment sold as a working set, including: CNC plasma cutter Satronic E3500, water table 2000x6000; ventilation unit Kemper 8000; cutter Thermal Dynamics Ultra-Cut 200 In case of interest, it is possible to make demo work. Kfedsv U Uzmjpfx Affea

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,300 mm, total length: 4,215 mm, table height: 1,000 mm, working width: 1,500 mm, Equipment: documentation/manual, MetalMaster 2.0 CNC-controlled flatbed dry plasma cutting machine for oxy-fuel and plasma cutting of individual metal sheets. Kjdpexyhnaefx Affjfa The positive-fit double-sided longitudinal drives and precisely machined guide rails offer you: - High positioning and working speeds - Maximum positioning speed: 35,000 mm/min - Working speed: 5,000 mm/min - High cutting accuracy and contour fidelity - Accuracies according to DIN EN 28206 - Supply voltage: 400 V 50 Hz, TN-S system (3/PE/N) - Color scheme: main components in RAL 5002 blue - Ambient temperature: +5 °C to +45 °C - Relative humidity: max. 90%, non-condensing Integrated extraction table - Table height: 1000 mm - Maximum table load: 800 kg/m2 Machine - Maximum sheet format: 1500x3000 mm - Overall width: 2300 mm - Overall length: 4215 mm For further information, please see the pictures!

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,000 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,000 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source Kfjdswltwaepfx Affea 1 owner throughout all service life Good condition, still in operation Set of technical documentation (users + maintenance manuals) Filter unit GTV included Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Organizing of transportation to countries of the European Union (at separate quotation)

Condition: good (used), Vollmer GPA 10 U the stellitieren in the plasma welding machine Equipped for band saw blades Kfedpfx Asd Ernweffea Help feed with heavy support brackets

Year of construction: 1980, condition: good (used), Device number: 2 002 Welding current at 100 % ED: 80 Amp Connection: 18 kVA Cooling type: forced cooling Equipment: hose package for connection; burning device; mobile Dimensions: 1.000 x 700 x 1.000 mm Weight: 0,3 t Kodehk El Tepfx Affefa

Condition: used, This listing is for a Labcold RVPF0734 Plasma Freezer. The unit is in full working condition and is ready for immediate release. Ensure the highest standards of blood plasma storage with the Labcold RVPF0734 Plasma Freezer, a state-of-the-art laboratory-grade solution designed for optimal performance and safety. This floor-standing freezer combines advanced technology with a space-saving design, making it an ideal choice for healthcare facilities and research laboratories. Key Features: Kfsdpfx Afsxx Afqefsa Optimal Temperature Control: Achieve a consistent temperature range of -34°C, essential for preserving plasma quality and integrity. Faster Thawing Times: Designed to minimize thawing duration's, reducing the risk of bag cracking and ensuring safe handling of sensitive materials. Convenient Storage: Equipped with front-opening doors and multiple storage drawers, allowing for easy access and organization of plasma bags. Digital Alarm and Display: Stay informed with real-time monitoring through a digital display and alarm system, ensuring immediate alerts for any temperature fluctuations. Chart Recorder: Track temperature changes over time for compliance and quality assurance. Benefits: The Labcold RVPF0734 is registered as a medical device in accordance with EU Directive 93/42/EEC and compliant with BS4376: Part 2:1996, ensuring reliability and safety in plasma storage. Its spark-free interior and lockable doors provide secure access and protection against flammable materials. Technical Specifications: Temperature Range: -34°C (tested to reach -36/-37°C) Safety Features: Spark-free interior, lockable doors Monitoring: Digital thermometer included for precise temperature tracking

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module Kfsdpfx Afovfmiwefsa ex works

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem. Kodpjxxighjfx Affjfa

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20515021, table length: 6,000 mm, table width: 2,500 mm, Equipment and features: Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Lower cutting table dimensions 2,5 x 6 m Equipment: - heat recovery and flue gas suction system included in the shop The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus. Kfsdpju Rnkwsfx Affsa

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 115331, working range: 6,000 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 4,000 kg, input voltage: 400 V, cutting height (max.): 200 mm, workpiece weight (max.): 3,800 kg, table length: 6,000 mm, table width: 2,000 mm, cutting current: 280 A, Plasma cutting machine with extraction, dimensions 6000 x 2000mm Voortman VACAM VCS Thermo Kfodpfovld D Sex Affea Plasma cutting system Kjellberg HiFocus 280i Plasma gas control unit FlowControl 3 Cooling unit KWE 360 Cutting current 10 - 280A Smoke extraction system Teka Filtercube 4 H Year of manufacture 06/2013 Filter inserts 4 integrated blower Motor power 7.5KW

Condition: excellent (used), functionality: fully functional, Spray paint surface finishing system pistol with spare parts Kjdpfoxxhrcox Affefa

Condition: new, Year of construction: 2025, We offer you: Paint wall TPW1515 Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Kfodpfx Aog Sikrjffea Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Ksdpfx Ajxwn Inoffefa

Condition: used, Year of construction: 2021, cutting range for steel to 50 mm capacity at 100% 130 A weight of the machine ca. 130 kg dimensions of the machine ca. 650 x 400 x 900 mm ORIGINAL PRICE: ~6,000 EURO Very good condition Very little use Features: - Burner A151/6 - Ground cable 25 mm² Kodpfx Aov Da Udsffsfa Adjustment range, continuously variable [A] 25 - 150 Duty cycle at Imax. (10 min) at 20°C [%] 60 Mains connection [V] 3 x 400 V Fuse protection (slow-blow) [A] 35 Protection class IP 23 Cutting capacity max. [kw] 21 Current/voltage at 100% IDl [A/V] 130/130 Power consumption max. 24.5 Power factor [cos phi] 0.97 Max. cutting quality with REHM power torch 40 mm Max. cutting capacity for manual cutting with S 235/S355 [mm] 50

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Ksdpjxr U Rlsfx Affjfa Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, The Mini Spray Dryer B-290 is the laboratory equipment of your choice for the quick and gentle drying to powder of liquid end products. The impressive features of the Spray Dryer include its efficient performance with very short set-up times, an effective inte grated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. Ksdpfx Afsxwdb Dsfofa

Condition: good (used), Year of construction: 2019, functionality: fully functional, sheet thickness (max.): 30 mm, table length: 6,000 mm, table width: 2,000 mm, - Includes Katana control system - Kjellberg Hi Focus 161i neo plasma source with automatic gas mixing console - Machine table size: 6,000 x 2,000 mm - Marking and cutting of structural steel up to 30 mm (also suitable to a limited extent for aluminium and stainless steel) - Includes nesting software Sigmanest (dongle version with no ongoing costs) - Includes accessories (see pictures) - Includes extraction system (see pictures) Kodpfx Ajxl Ayzoffjfa The machine has been regularly maintained and seldom used (approx. max. 8 – 15 hours per week). The plasma cutting system is still in operation and can be inspected and tested on site by prior appointment. We are happy to recommend a specialist company to assist you with dismantling and relocating the machine if required. Original purchase price WITHOUT accessories: €140,000 plus VAT. Subject to change and error. Sale exclusively to businesses, with VAT shown separately. No warranty or guarantee. Immediately available. No dismantling or delivery – collection ex works only!

Condition: new, Year of construction: 2025, TM2015 spray booth Working dimensions (mm): 2000 (w) x 1500 (h) x 450 (d) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1,5 kW fan power, Ksdod S N S Hjpfx Affefa • Capacity 7600 m³/h, • 950 Pa compression, • Right or left side discharge, • 3 stage air filtration, • The degree of filtration at the level of 98%, • Explosion-proof Ex fan, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Kfjdpfx Afswty H Djfja Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, functionality: fully functional, The company BUMEX SP. Z O.O. A car wash for preparing elements before powder coating Working dimension: Kfsdpfx Ashfv D Seffja 1500 x 3200 x 2200mm Chemical tanks heated by oil, gas or electricity, Liquid tanks between 1500-2000l 3-stages of work, Operating temperature up to 60 degrees Celsius, Fully automatic control Pre-filter to collect impurities Made of AISI 1.4301 acid-resistant sheet metal Our devices are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, The perfect paint set for car rims, motorcycle frames or other smaller things with a rail system and trolleys. Powder coating oven 1500 x 1500 x 1800 mm Powder coating booth 2000 x 1800 mm Oven / Dryer Technical data: Working dimension 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, Ksdped S N R Usfx Affjfa • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. Powder cabin: Working dimensions: 2000 x 1800 mm 2.2 kW fan power Fan capacity 10,500 m³ / h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Paint set: Powder coating furnace 1200 x 1500 x 1800 mm Powder coating booth 1400 x 1400 mm Complete kit for manual powder application OVEN / DRYER TECHNICAL DATA: Working dimension (mm): 1200 x 1500 x 1800, • Power consumption: 20 kW. EQUIPMENT: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. POWDER CABIN: Working dimension (mm): 1400 x 1800, Fan power: 1,5 kW, Fan capacity: 6 500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER APPLICATION The Inocart VT manual powder application kit is ideal for the even application of powders such as polyester, epoxy or acrylic, which are delivered in 20 kg cartons. * Constant and even spraying ensuring smooth and uniform painting, * A well-balanced gun that is comfortable to use, * TEC5 technology ensuring high quality of painting finish, * 3 factory settings for quick commissioning, * 99 client settings, * Inobox height adjustment for comfortable work with the control, * Strong cascade ensuring the effect of powder curling around the detail, * High transfer efficiency minimizing the painting time, * Advanced HV control for perfect coverage of hard-to-reach parts, * Powder flow rate adjustment, * Stepless electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for easy carrying of the Inocart device, * Unbeatable cascade lifetime, * Monitoring of wear parts for replacement in the right time. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Kodpohd Nraofx Affefa Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.