Used Plasma Cutting Device for sale (23,522)

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. Rbsdpfx Abexwmb To Isw The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support). Rbodpfxetp Dhpj Ab Ijw  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Rsdpfxovpalas Ab Iebw ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential. Redjfz A I Eopfx Ab Ijbw

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Rbsdpfx Aoxywupsb Isw Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T Rjdpeww Sy Dofx Ab Ijbw If you have further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,300 mm, total length: 4,215 mm, table height: 1,000 mm, working width: 1,500 mm, Equipment: documentation/manual, MetalMaster 2.0 CNC-controlled flatbed dry plasma cutting machine for oxy-fuel and plasma cutting of individual metal sheets. The positive-fit double-sided longitudinal drives and precisely machined guide rails offer you: - High positioning and working speeds - Maximum positioning speed: 35,000 mm/min - Working speed: 5,000 mm/min - High cutting accuracy and contour fidelity - Accuracies according to DIN EN 28206 - Supply voltage: 400 V 50 Hz, TN-S system (3/PE/N) Redpfx Asxyhnaeb Ijbw - Color scheme: main components in RAL 5002 blue - Ambient temperature: +5 °C to +45 °C - Relative humidity: max. 90%, non-condensing Integrated extraction table - Table height: 1000 mm - Maximum table load: 800 kg/m2 Machine - Maximum sheet format: 1500x3000 mm - Overall width: 2300 mm - Overall length: 4215 mm For further information, please see the pictures!

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20515021, table length: 6,000 mm, table width: 2,500 mm, Equipment and features: Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Lower cutting table dimensions 2,5 x 6 m Equipment: - heat recovery and flue gas suction system included in the shop The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus. Rbedpfju Rnkwsx Ab Isw

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. Rbsdpfogypclox Ab Iew - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: ready for operation (used), MGM Omnicut 3100 – CNC cutting machine for plasma and oxy-fuel cutting High-quality CNC cutting machine, ideal for high-precision plasma and oxy-fuel cutting of structural steel, stainless steel, and non-ferrous metals. — Technical Specifications • Machine type: CNC cutting machine • Model: Omnicut 3100 • Working area: 2,000 × 4,000 mm • Required floor space: 6,500 × 3,500 mm • Maximum positioning speed: up to 20 m/min • Positional accuracy: high precision in cutting and positioning • Programming software: SAPSproW standard version, with optional upgrade for bevel or drilling technologies Axes & Drives: • X-axis: robust H-beam design with precisely ground rack and pinion • Dual-sided drive on the X-axis for maximum stability and durability • Y-axis: maintenance-free linear guides, suitable for both light and heavy equipment • AC servo drives controlled via frequency converters, maintenance-free Cutting Technologies: • Oxy-fuel: Electric torch carriage with capacitive height control system • Plasma: Electric torch carriage with programmable height control system • Supports additional technologies such as bevel torches and drilling units — The machine is in excellent condition and ready for immediate use. • Inspection at any time • Loading and transportation can be organized without difficulty Rbsdpfx Asxk Trrjb Ijw — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are plus VAT. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Rbjdpfx Abswhk E Hs Ijw Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Rbodpfx Aoxfk Dzeb Iow Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Rbedpfx Absxciumj Isw Good condition

Condition: excellent (used), Panhans tenoning carriage with clamping device for use on table milling machines. Manufacturer is Panhans, but it was mounted on a Martin Schenk spindle moulder. Rbjdpjxb Sy Aofx Ab Iow Base plate length approx. 1000mm Sliding travel approx. 710mm Eccentric clamp for securing workpieces Tilting fence The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this supplier."

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm C.N. E.C.S. series 900 Rbsdexc Ibrjpfx Ab Isw GENERATOR: CEBORA PLASMA PROF166

Condition: new, Year of construction: 2025, BAYKAL Plasma Cutting Machine Systems, BPL H: Highly accurate and reliable performance with positioning speeds. Rbsdpor En Riofx Ab Isw Key Advantages of BAYKAL Plasma Cutting Machine Systems; BAYKAL Plasma cutting is comparatively cheap for medium thickness cuts. High-quality cutting for thicknesses up to fifty millimeters. Maximum thickness of one hundred and fifty millimeters. Plasma cutting can be carried out on all conductive materials, in contrast to flame cutting which is only suitable for ferrous metals. When compared to flame cutting, plasma cutting has a significantly smaller cutting kerf. Plasma cutting is the most effective means of cutting medium thickness stainless steel and aluminum. Faster cutting speed than oxyfuel. CNC plasma cutting machines can offer excellent precision and repeatability. Plasma cutting can be carried out in the water which results in smaller heat-affected zones as well as minimizing noise levels. Plasma cutting can cut more complex shapes as it has high levels of accuracy. Plasma cutting results in minimal dross as the process itself gets rid of excess material, meaning very little finishing is required. Plasma cutting does not lead to warping as the fast speed significantly reduces the heat transfer.

Condition: good (used), functionality: fully functional, Baykal BPS_Hypertherm HPR260 Baykal BPS is the model that provides top level sensitivity amongst all series. It is designed for high sensitivity plasma cutting. Plasma cutting system Baykal: Benefits: - High mechanical accuracy to: ± O.1 mm - Axis positioning speed: 30 m/min - X and Yaxis travel on precision linear rail guides. Redpfx Ajruq Azeb Iobw Technical data: - Independent CNC console - Tube(pipe) cutting place - Bevel cutting head - Hypertherm HPR260 - Independently Constructed Table Plot dimensions: 2000mm x 9000mm (without the pipe cutting place) 2900mm x 9000mm (with the pipe cutting place) PLASMA SOURCE: Hypertherm HPR260 Specification: - Maximum cutting tickness: up to 65mm - Bevel cutting: up to 45 degrees - Output voltage: 175 VDC - Output current: 260 A - Maximum OCV: 311 VDC - Dimensions: 115 cm (45.1") H, 82 cm (32.1") W, 119 cm (46.7") L

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Rbodpfx Aboxugqvj Isw Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Condition: new, Year of construction: 2025, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Rbsdpfofwmrpsx Ab Isw Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR Rodpfx Abjrb Dyze Iebw It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Condition: like new (used), functionality: unexamined, Attachment for cutting female threads, with MAS cam automaton. Originally packed, unused. Rsdpfxow N Ta Io Ab Isbw

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Rsdef Ak N Repfx Ab Isbw Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, workpiece weight (max.): 900 kg, table length: 3,000 mm, table width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The head has been replaced and the machine has been serviced! TECHNICAL DETAILS Table size: 3,000 x 1,500 mm Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (stainless steel): 20 mm Maximum sheet thickness (aluminium): 20 mm Maximum workpiece weight: 900 kg Plasma source: Hypertherm 125 MACHINE DETAILS Rsdjxcwakopfx Ab Ijbw Total weight: 1,100 kg EQUIPMENT Documentation/Manual

Year of construction: 2011, condition: good (used), 3D Tube Cutting Machine Plasma source for cutting steel, stainless steel, and copper tubes. Maximum tube length 1300mm. Diameter range 80mm to 400mm. Sheet thickness 0.4 - 0.5 - 0.6 - 0.8 - 1mm This system uses programmed plasma cutting to produce the required tube sections for fabrication of all types of flue pipe fittings from longitudinally welded linear tubes. Rbodpfxow E Ixxj Ab Iew Fully 3D graphical user interface for easy data input and accuracy verification. Library for creating customizable parametric elements.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1177, sheet thickness steel (max.): 80 mm, track width: 4,000 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,000 mm, stroke length: 215 mm, Comprehensively equipped plasma cutting system with Kjellberg Smart Focus & Kemper filter - last overhauled in 2024! TECHNICAL DETAILS Working Area Track width: 4,000 mm Working area: 3,000 mm Working width: 3,000 mm Working length: 6,000 mm Table length: 6,600 mm Table width: 3,200 mm Rbedpswzhdyjfx Ab Ijw Maximum cutting length: 6,000 mm Maximum cutting width: 3,000 mm Stroke & Speed Stroke: 215 mm Speed: 70 mm/s Feed speed: 12,000 - 20,000 mm/min Material Thicknesses Steel sheet thickness: max. 80 mm Aluminum sheet thickness: max. 80 mm Height adjustment type: electric Cutting head: PerCut4000 quick-change head Automatic gas control: Kjellberg PGV-300 Energy chain: 8 m Filter System KEMPER PlasmaFil Compact Type: 31 0650 Extraction capacity: 4,500–6,500 m³/h Negative pressure: 1,900–2,500 Pa Filter area: 100 m² Motor power: 7.5 kW Voltage: 3 × 400 V 50 Hz Dimensions: 1,830 × 1,830 × 3,800 mm MACHINE DETAILS Dimensions Total width: 4,960 mm Total length: 8,400 mm EQUIPMENT Documentation/manual Laser pointer for sheet alignment 8 m heavy machine runway with HEB300 High-precision linear guide with servo motor For disassembly, the existing crane system in the hall can be used.