Used Plasma Cutter Dc for sale (6,184)

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Itjdpfxjz Ht Ebe Ahbon Usage: Frozen Block cutter for butter and similar products Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: Itjdpfx Ahoz D U Hnobsn 400 to 1,000 cycles per hour

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 289.112, sheet thickness (max.): 32 mm, overall weight: 3,000 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,500 mm Max. material thickness: 32 mm Itodoz Ebclspfx Ahben MACHINE DETAILS Drive system: CNC Control system: Beckhoff Resonator manufacturer: Hypertherm Resonator type: Powermax 105 Connected power: 16.8 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,400 x 2,200 mm Shipping weight: 3,000 kg Shipping packages: 1 unit EQUIPMENT Various accessories Spare parts Note: The machine is sold without a dust extraction system.

Condition: like new (used), Electric Roll Cutter, 200 cm * Cutting length: 200 cm * Includes base frame * Includes roll holder * Includes collection bag for paper waste * Includes lighting * Cutting indicator Ijdpez Hkn Hsfx Ahbetn * Max. cutting thickness: 1.2 mm * Electric * Cutting activation via foot switch or by pressing a bar above the table * Self-sharpening blade * 230 V / 50 Hz / Operating manual included.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Itjdpfsz Dtbwjx Ahbjn Tail on the delivery.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes Iedpfx Ahefnlkwebotn • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Isdpfszd Tg Aex Ahbotn Location: Nattheim.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) Isdpfxoyxvwio Ahbstn • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Itsdpez Ekd Eefx Ahbjn Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW EQUIPMENT Saw carriage CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm Isdpowh Tq Ssfx Ahbjtn • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and stepless feed, in very good CONDITION, CE compliant Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6209 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts plan About the machine: Itsdpfx Ahsxdi Ivjbsn For sale is a universal milling machine Deckel FP1 with CE certification, in very good condition. The machine has very minimal backlash and all spindles can be moved easily. Even at maximum speed, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine via a plug, making transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine features rapid traverse in those axes as well. Another great advantage is the active 3-axis digital readout. With this Heidenhain path control, you can input dimensions, and the machine will automatically move to them. The FP1 was previously located in a training facility, where it was only used occasionally. The oil was changed, and the machine has been mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to inspect and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Iodpfxoxu E Nqo Ahbotn Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles Itodpow En E Eofx Ahbon

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 363 kg, empty load weight: 4,966 kg, construction height: 2,740 mm, fuel type: electric, total length: 3,120 mm, drive type: Elektro, construction width: 1,750 mm, working height: 14,300 mm, Scissor lift Speed class: 7.2 Technical condition: New Battery condition: New Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service, and repairs – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used equipment. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie GS-4069 DC is a powerful all-terrain scissor lift for working at height outdoors and on uneven surfaces. With a working height of up to 14.3 m, a large platform, and emission-free electric drive, this equipment is ideal for construction sites, assembly and maintenance work involving people, tools, and materials. Robust, off-road capable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. Itjdpezu D Tzefx Ahbjn

Condition: excellent (used), 1 piece HSS milling cutter various diameters Itsdozw U S Tepfx Ahbjn roughing and finishing cutter with diameters from 14 - 40 mm very good condition 17.5 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, EX-Trafire 30H Hand System starter 230V Plasma system Portable and powerful Cutting performance Cutting width (mm) (structural steel) 10+ Recommended (mm) 8 Piercing (mm) 8 Cutting current (A) 10-30 Duty cycle: 100% @ 21A - 88.4V 60% @ 25A - 90V 35% @ 30A - 92V Voltage 220-240 V Air flow (lpm/bar) 48/4.5 Isdpfx Ahsz D Aiwobjtn Pressure (max) (bar/psi) 10/145 Dimensions W x L x H (mm) 165 x 480 x 290 Includes hand torch FHT-EX 30H and wear parts Starter kit

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of cooling: air, input current: 16 A, Duramax Lock H75°6m Design: Itsdpfx Aoz D Akuehbjn · Professional plasma cutting machine for cutting metals up to a recommended thickness of 16 mm (max. 29 mm) · Manual and machine operation with CNC interface and FastConnect™ torch connection · Patented technology for cutting with surface contact · Automatic adjustment of air pressure via Smart Sense™ technology · Marking, scribing, and precise beveling with the new low-amperage process · Duramax® Lock torches are designed for high impact resistance and temperature resistance Scope of delivery: includes torch and ground cable Workshop-tested used unit

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,859 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fuel type: diesel, mast type: duplex, fork length: 3,250 mm, TECHNICAL DETAILS Isdpfxjz D U Dgs Ahbstn Lifting capacity: 12,000 kg Lifting height: 5,250 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm Number of wheels: 6 Tires: Pneumatic tires MACHINE DETAILS Mast: Duplex Fuel type: Diesel Operating hours: 16,859 h Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Transport packages: 1 unit EQUIPMENT Work lights Heater Full cabin Pneumatic tires License plate Documentation CE marking Fork adjustment Side shift

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) Iedoz Ebnhspfx Ahbstn CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Iedpfx Aezlgf Ijhbjtn Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: PCPP350-001, type of input current: AC, input voltage: 220 V, input current: 11 A, input frequency: 50 Hz, For sale is a professional, automatic tape and label cutting machine from Italian manufacturer Meccanica Maggiore s.r.l., model Procut 350. The machine is brand new and has never been used in a production cycle (0 operating hours). It is preserved in its original protective film, fully functional, and ready for immediate pickup. Technical specifications: - Manufacturer: Meccanica Maggiore s.r.l. (Italy) - Model: Procut 350 - Year of manufacture: 2020 - Condition: Factory new / unused - Serial number: PCPP350-001 - Working width: 350 mm - Power supply: 220V / 230V, 1PH+N (standard single-phase socket) - Power: 2.5 kW - CE certificate Precise kiss-cut and full-cut processing from roll to roll for a wide range of flexible and technical materials: - Labels and films: self-adhesive labels, PVC, PP, PET films, protective films. - Tapes and hook-and-loop fasteners: hook-and-loop tapes (Velcro), industrial double-sided tapes, reflective tapes, foam and masking tapes. Iedpjz Hdhtofx Ahbotn - Foams and plastics: EPDM foams, felt, self-adhesive pads, furniture hook-and-loop fasteners, abrasive discs. - Technical materials: rubber/silicone seals, soundproofing elements, medical laminates, and technical textiles. Designed for industries such as: Label printing companies, tape and hook-and-loop fastener converters, furniture/mattress manufacturers, companies in the automotive and electronics industries, and clothing and workwear sewing factories. Condition: Machine is factory new (0 operating hours) – ready to be implemented in a production process. Location: Łódź (Poland). The machine can be viewed on-site.

Condition: good (used), Year of construction: 2013, operating hours: 400 h, machine/vehicle number: DC, load capacity: 363 kg, overall weight: 5,417 kg, construction height: 2,670 mm, product width (max.): 1,760 mm, working height: 14,000 mm, Diese Beschreibung stellt kein verbindliches Angebot dar und kann kann Fehler beinhalten. Keine Gewähr auf alle Angaben. Itedpfx Ahez Euhujbsn

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site. Isdpfx Ahsvb Ud Usbotn

Condition: excellent (used), Planing cutter head (28149) Iodpfxeg Er H Ho Ahbotn Manufacturer: ISCAR Type: F 90 A - D160-40 M Weight: 5 kg

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg dimensions 400 x 150 x 250 mm Itsdpfx Aeupxk Dehbjn Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm