Used Pistons for sale (1,889)

Condition: used, functionality: fully functional, For sale: used chamber filter press – VICENTINI Technical specifications: Includes diaphragm pump VICENTINI PM 800:  • output 800 l/h • max pressure 10 bar  • 1.1 kW motor • 1 piston • 64 strokes/min  • 1½″ inlet and outlet ports 22 cast iron round plates, Ø 660 mm Manual hydraulic closure (piston-driven) Lodswrwt Eepfx Affsta Approx. capacity: 350 kg per cycle Condition: working and ready to use

Condition: like new (used), shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Ltjdjx Hwnfspfx Affoa

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules Ltedpfex Huxujx Affoa - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: excellent (used), Year of construction: 2017, Oil-free compressor ATLAS COPCO ZT90VSDFF, machine with inverter and air dryer. Ltodpfx Afjxu Hkvofsa Technical specifications: Capacity: 13.02 m³/min; Motor power: 101 kW; Pressure: 10.2 bar; Operating hours: 15,849 h Year: 2017 We provide service. Price: PLN 87,500 net PLN 107,625 gross Below is a link to a video showing the machine in operation.

Condition: good (used), Emil Kahle Letterpress Machine Platen Manufactured in Germany by Emil Kahle Maschinenfabrik, Leipzig Reudnitz A brilliant-looking exhibit to place in a company lobby. Manually added piston. Foot pedal controlled. Frame with mounted form included. Ljdpfxevac S Rj Affeta Frame size approx. 365×255 mm.

Year of construction: 2013, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Model #2WN137F1-H23Z-BJMVA-21/50T, Crosshead piston compressor for small-molecule gases such as hydrogen or argon. Oil-free! Installed as a backup unit but never put into production, so it is in like-new condition. Current new price: €190,000. Inlet pressure: 5 psi = 34.5 kPa (0.345 bar gauge) Outlet pressure: 60 psi = 413 kPa (4.13 bar gauge) Flow rate: 148 scfm = 240 m³N/h Power requirement: 30 kW Lodpfjv Uyqmex Affjta

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane available immediately, the vehicle is for rent with purchase option. Chassis: Fuso 3S15 Canter - Total weight 3500kg, payload of finished vehicle with loading crane and aluminum platform approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling ball head 3500kg with electrical kit (factory) - Heated exterior mirrors - Automatic air conditioning - Radio preparation - Reversing alarm - Auxiliary drive with speed increase - Battery cover and AdBlue tank cover - Preparation for battery isolation relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum platform: - Inside: 2720mm x W 1820mm x H400mm - Base plate 18mm - Floor frame with airline rail all around - Airline rail also in the front wall - Side walls anodized aluminum with folding step, easily removable - Storage box - Work lights - Other platform dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of production: Italy) - Lifting capacity according to manufacturer: Max. 995kg 3.2m=815kg, 4.40m=575kg, 5.60m= 400kg, 6.80m= 300kg, 8.05m=220kg - Design according to CE directive (EN 12999) - Swivel range 370° (swivel range limitation 190°) - All hydraulic cylinders double-acting - Piston rods hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support extendable on both sides, special support, support width 3.10m - Hydraulic Support can be swiveled 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hooks and fastening clamps Ledpfswl Rb Nex Affeta - On-board voltage 12V - Scanreco radio remote control 6 functions - electrical modules for Danfoss S800 control block 4 functions - Danfoss control block S800, 5 functions including high-pressure filter - Special support, support width 3.10m 1.00 pcs - Additional charge for shortened support legs » by 80mm - Mechanical arm extension N » stroke 1.30 m (7.0k - Additional charge for stainless steel screws and stainless steel pipe clamps - Additional charge for Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block factory-mounted - LED work lights on the articulated arm factory-mounted - LED for 2 support legs - Optional: rear view camera with Carplay, spade holder, 90° rope, additional storage box available Subject to errors and prior sale. ... Air conditioning, climate control, VAT deductible, ABS, electric WFS, central locking with remote control, trailer coupling, power steering, spare wheel, driver's cab: local transport, crane, new, emissions class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/inside/outside), particle filter, can be rented, fine dust sticker: 4 - green

Condition: good (used), Year of construction: 1982, Piston compressor Manufacturer: BOGE Type: SB m770 Year: 1982 Max. pressure: 15 bar Tank: 500L. Low operating hours. Ledjxq Tlxepfx Affjta

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 35 day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ►►Buy It Now◄◄ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Here you will find our latest generation of compact stripping systems! High-quality paint removal tank for gently removing paint from aluminium, Material made of stainless steel V4A (AISI 304). Anti-magnetic, acid-resistant, very robust design for long-term daily use. With CE mark for all systems including cover, double-walled and heat-insulating. Digital control with temperature limiter control box with FI protection and digital display, 0-110 °C continuously adjustable. 4-way adjustable feet for alignment. High quality ceramic heating element. V4A (AISI 304) stainless steel drain valve for quick and effective cleaning of the system. emergency switch. The price shown is for the smallest standard model. Other options can be requested. ⭐ PAINT REMOVAL TANK – BSK-1200-700*700 ✔️ Working dimensions (L/W/H): 1200 x 700 x 700 mm ✔️ External dimensions (L/W/H): 1450 x 950 x 1250 mm ✔️ Inside the tank is V4A stainless steel (AISI 304) ✔️ Outside the tank: stainless steel. ✔️ Adjustable feet ✔️ Capacity: 832 liters ✔️ Electrical heating power: 22 Kw/h - 2 levels - Fast heating ✔️CE - certified ✔️ High-quality V4A stainless steel tubular heaters ✔️ Industrial damper for easy lid opening and closing ✔️ Exit/outlet via ball valve ✔️ Digital control with temperature limiter and timer ⚙️ Not included in the offer, optional extras: ►Stripper booth (optional) ►Drip tray (optional) ►Crane frame and crane (optional) ►Blender (optional) ►Piston cap (optional) ►Pneumatic cylinder cover ►Extraction hood (with explosion-proof fan) (optional) ►Additional immersion basket ⭐⭐Depending on the chemical to be used, we also have tank models made of V2A AISI 304 stainless steel. Please pay attention to this when making your selection! Ask about the price difference.⭐⭐ Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ⭐Follow us for new campaigns⭐ Ltjdpfxsfw Nvxe Affoa ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake Ljdpfx Afjxab Ugefsta - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Ltjdpfxewxtb Sj Affsa Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Ljdpex Dnb Usfx Affsta Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders Ltsdpfx Afegxcubjfja -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shear -Piston rod: Ø 140 mm -Stroke: 170 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 270/270/H565 mm -Weight: 326 kg/unit

Condition: excellent (used), Catalogue number 6763 Ltedoim Sffjpfx Affea TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm Ledpfxex Hp E Aj Affjta distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Ltodex Dc T Eopfx Affea

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. Ledpfx Aovac S Doffjta A manually added piston. Rollers Format of the pressure 35x24cm

Condition: new, Year of construction: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH MANOMETER Hydraulic press with rapid motor with pressure gauge and double hydraulic power pack speed obtained with vane pump for fast approach and return and with axial piston pump for the working phase. Equipped with calibration and three-position control valve (neutral return). The machine is complete with oil. Equipped with winch for lifting the worktop. The stem is made of special steel, treated and chromed. The machine is equipped with bimanual control and simultaneity as from regulations in force. Complete with protective panels, rear and side panels. CE approval complete with electromagnetic compatibility. Ltsdsfh R Nyspfx Affsa Piston stroke : mm 310 Interior light : mm 1,010

Condition: like new (used), functionality: fully functional, Year of construction: 2023, maximum speed: 40 km/h, first registration: 08/2023, overall weight: 17,500 kg, front tire size: 550/45-22.5 14PR 154A5, rear tire size: 550/45-22.5 14PR 154A5, total height: 3,300 mm, total length: 7,580 mm, total width: 2,550 mm, outer radius: 9,900 mm, number of axes: 2, Equipment: additional headlights, lighting, The timber forwarding trailer is as new, having been used for a maximum of 50 km. It is currently approved for 40 km/h. Load volume is 16.30 RM. Transport of long timber up to 6.10 m is possible. An inspection report for BE 40 km/h with mudguards is available. Mudguards are included. Palms own hydraulic system. A high-performance 130 ccm piston pump is permanently installed in the drawbar. Large hydraulic tank with a capacity of 95 liters. Ltedpfex Hil Nex Affja Large timber grapple: Hultins Greifer Super Grip 420 S. Palms forestry crane FK 7.94 with a reach of 9.9 m and a lifting capacity of 350 kg at full extension. The indicated sales price is net, plus 19% VAT. Sale is exclusively to commercial customers, with exclusion of any liability for material defects. Includes 2 LC6 mini-joysticks for all crane functions and 2 LED work lights.

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change) Ltedpfx Afskqui Rjfsa

Condition: new, functionality: fully functional, overall weight: 2,320 kg, suspension: other, color: orange, Year of construction: 2025, operating hours: 5 h, power: 14.6 kW (19.85 HP), fuel type: diesel, gearing type: automatic, fuel consumption per hour: 2 l/h, number of seats: 1, operation weight: 2,200 kg, lifting height: 4,190 mm, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.068 m³, fuel tank capacity: 20 l, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact and powerful 2.5-ton mini excavator designed for professional use in construction, landscaping, municipal, and agricultural applications. Its robust construction and advanced load-sensing hydraulics deliver efficient, precise performance, even under demanding conditions. With its boom swing capability, the machine is ideal for work in confined spaces as well as for traditional earthmoving and foundation work. Key Technical Features: - Boom swing for precise operation in tight areas - Stable undercarriage (1,300 / 1,500 mm) for high stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-performance axial piston pump - Hydraulic piston travel and swing motors - High digging and breakout forces - Wear-resistant rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Upper structure ground clearance: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Travel & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dump height: 2,880 mm - Min. swing radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. drop depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Operating pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cabin with heating - Dozer blade - Joystick control - LED work lights - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel structure Accessories & Attachments – Included Set: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (drills 150 / 200 / 300 mm + extensions) – Set price €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex stock Rheda-Wiedenbrück (DE) Ltedpfex Hg Etex Affsa Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery January 2026 guaranteed - Europe-wide delivery available on request This machine complies with the highest safety standards and is CE-certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: used, Technical specifications: Operating hours: 2443 h Tank capacity: 500 l Performance: 950 L/min Pressure: 10 bar Electric temperature display Safety switch Power supply: 400 V Motor power: 9 kW Lsdpjx Hghbofx Affsta Dryer: Max pressure: 15 bar Max ambient temperature: +45°C Overall dimensions: Length: 1950 mm Width: 750 mm Height: 1400 mm

Condition: new, overall weight: 190 kg, total length: 780 mm, total width: 1,180 mm, total height: 1,050 mm, power: 5.5 kW (7.48 HP), volume flow: 50.4 m³/h, pressure (max.): 11 bar, We sell silent piston compressors with belt drive BSIL 0 / 840. - Powerful pump that provides extremely high performance and reliability at the highest levels. - Compressor and front panel that opens, allowing easy access and maintenance of all internal components. The oil level is clearly visible and topping up is simple thanks to the convenient location of the pump. - The control panel includes all the necessary instruments for the operation of the machine and is positioned to facilitate reading. - Forced ventilation for better cooling. Power supply: 400 V / 50 Hz / 3 phases Motor power (kw): 5.5 Motor power (HP): 7.5 Maximum pressure (bar): 11 Sound level (db): 64 Air flow (l/min): 840 Dimensions (mm): 1180 x 780 x 1050 Notes: Photos are symbolic. Warranty: 24 months Parity: EXW Logatec Ljdjx Hfkhepfx Affsta Price does not include 22% VAT.

Condition: used, functionality: fully functional, machine/vehicle number: PZEWL 160 R / HK, overall weight: 26,000 kg, Year of construction: 2001, Machine model: Zweiständer - Exzenterpresse Type: PZEWL 160 x 1 750 R / HK Serial number: A01006-03 Year of manufacture: 2001 Factory: Müller Type: PZEWL 160 R / HK Year of manufacture: 2001 Machine number: A01006-03 Included: Strap feed line, including: Strap width: 400 mm Strap thickness: 7.0 mm Compact unwinder Technical documentation (DE) Compatibility with EU directives: Machinery Directive 89/392/EEC (amended by 91/368/EEC, 93/44/EEC, 93/68/EEC) Low Voltage Directive 73/23/EEC Harmonized standards used: EN 292 Part 1 and 2 EN 60204 Part 1 EN 692 National specifications: VBG 7n5.1 ZH1/456 ZH1/457 General parameters: Height: approx. 4.70 m Width: approx. 3.41 m Depth: approx. 2.64 m Weight: approx. 26,000 kg Power consumption: 25 kW Technical parameters: Max. pressure at 6.7 mm before UT: 1,600 kN Torque at 120 strokes/min: approx. 9,350 Nm Torque at 40 strokes/min: approx. 10,700 Nm Gap under the piston guides: 1,750 mm Width between guides: 1,450 mm Table-piston distance (at max. stroke and top position): 560 mm Worktable: Dimensions: 1,700 x 1,050 mm Thickness: 160 mm Table hole: 1,200 x 240 mm T-slots: 7 pcs., width 22 mm, thread M20 Piston: Stroke: 8–160 mm Number of strokes: 30–120/min Ltsdpfx Aowmmzuoffsa Height adjustment: 100 mm Clamping surface: 1,400 x 800 mm Compensation pressure: For the machine: 3.60 bar For a tool weight of 100 kg: 0.32 bar Drive - Flywheel: Speed: 171–685 min⁻¹ V-belt size: SPB x 4500 mm Number of belts: 4 Run-down time at max. speed: 90 s Engine: Power: 22 kW Type: B3 Speed: 1 500 min⁻¹ Voltage: 400/690 V Hydraulic clutch: Type: 0-123-010-80-001-846 Working pressure: 60 bar Hydraulic unit power: 2.2 kW

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator, designed for continuous professional use in structural, civil engineering, and landscaping applications. With its robust steel construction, advanced load-sensing hydraulics, and compact dimensions, this machine is perfectly suited for tight construction sites as well as demanding earthmoving and foundation work. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, providing exceptional operator comfort, safety, and productivity — even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise work in confined spaces - Extendable undercarriage (990–1,300 mm) for maximum stability - Integrated travel motors with high/low-speed - Load-sensing hydraulic valves — energy-efficient and responsive - Axial piston pump with variable displacement - Plunger-type slew motor for upper carriage - Double cast counterweights for high stability - Wear-resistant rubber tracks, 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (upper carriage): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (extendable) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 HP) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. dumping height: 2,480 mm - Max. digging height: 3,570 mm Dozer Blade: - Max. lift height: 280 mm - Max. digging depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - System pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Standard Equipment: - Fully enclosed cab incl. heating - Joystick controls - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel frame - Double cast counterweights Accessories & Attachments — SET includes: - 25 cm trenching bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (150 / 200 / 300 mm augers + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts from stock in Rheda-Wiedenbrück (DE) Lsdpox Hg D Aefx Affsta Delivery & Availability: - Short delivery times possible (subject to stock) - Fixed-date delivery in January 2026 guaranteed - Europe-wide delivery organized on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück