Used Piston Kompresor for sale (1,875)

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly Dcsdezv Ei Hspfx Ailjn The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 Dcodpfoyga Utox Ailjn The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg Dodsz E R Dxopfx Ailecn - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: good (used), Year of construction: 2001, Air-powered airless pump on a pump cart The T2001 piston pumps are robustly designed, air-powered airless pumps developed for conveying, transferring, and spraying with multiple guns. The parts in contact with the material are made of stainless steel, hard metal, PTFE, or PE. An ATEX approval for use in potentially explosive areas completes the picture and makes the pumps versatile. Below, you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during conveying and spraying - Versatile due to stainless steel, hard metal, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy start-up thanks to a self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump carts - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction height (empty pump): 1.5 m water column Suction height (filled pump): 6.5 m water column Material temperature: +10 to +85 °C Maximum stroke frequency (short-term): 50 strokes/min Maximum stroke frequency (continuous): 20 strokes/min Maximum material overpressure: 6 bar Gear ratio: 60:1 Volume per cycle: 270 ccm Dedpfjrt Uy Nsx Ailecn Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4“ Material outlet: G3/8“ Material inlet: G1″ Weight: 45 kg Customs tariff number: 8424 8970 Year of manufacture: 2001 New price: 13,600 € including VAT You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Djdpfszc Nplex Ailjcn Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Dodpfx Aiezzp N Ielecn Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Dcsdpfxsxx Snbj Ailen Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, machine/vehicle number: 1811, 18er Valve Monobloc volumetric piston filler with 6 head capper filling valves: 18 Dedpfxsz Ibzae Ailecn capacity / hour ca.: 9000 capping heads: 6 working direction: right-left (CCW)

Condition: used, Machine: Rotary piston pump 10.000 ltr/h cooled Dodpfoz Ialksx Ailocn

Condition: used, Year of construction: 1992, Weinig UNIMAT 17 A comb, 6 spindles + universal, with pneumatic feeder for long pieces, functional, used. Optionals: Dedpfoz I Thlex Ailjcn code 926030 Return belt from 5500 mm with stacking unit 4-piston pneumatic ejector code 926031

Condition: used, Year of construction: 2023, operating hours: 2,044 h, We are offering this used Atlas Copco XATS 138 piston compressor, manufactured in 2023, for sale. Dodpezvmnqofx Ailecn Manufacturer: Atlas Copco Model: XATS 138 Emission stage: Stage V Operating hours: 2044 h Operating pressure: 0.0 bar Speed: min⁻¹ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2011, operating hours: 237 h, KAESER N153-G compressor, serial no. 1042 / dryer / filters Dcodpfsz Hl Izjx Ailon MANUFACTURER: KAESER TYPE: N153-G SERIAL NO.: 1042 YEAR: 2011 POWER (kW): 4 CAPACITY (m3/min): 1.33 PRESSURE (bar): 40 HOURS (SERVICE/TOTAL): FREQUENCY CONVERTER: BUILT-IN DRYER: EXCHANGER: COOLED (AIR/WATER): ON THE TANK: DOCUMENTS: CONNECTION: NEW/USED: USED

Condition: good (used), Year of construction: 2018, two compressors: price per unit 9,000.00. Dedpfjz Eqpzsx Ailocn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1 x Reciprocating compressor Renner RIKO 700/270 ST Year of manufacture: 2016 In very good condition with only 685 operating hours. Technical data: Intake capacity: 700 l/min Delivery rate: 570 l/min Dcjdpfx Ajznk Apsilon Rated power: 4 kW Max. pressure: 10 bar Tank size: 270 l The compressor can be inspected while powered.

Condition: used, Year of construction: 2010, Technical data Manufacturer / model: C.M.E. S.r.l., Ideal I360 / type 1360 Serial number / year: Flow rate / operating pressure: 36 m³/h at 3 bar Dedpfx Aisz Ia Aiolscn Maximum pressure: 4 bar Motor power / speed: 5.5 kW / 2,900 rpm Dimensions (L × W × H): 1,350 × 730 × 960 mm Weight: approx. 325 kg Connections: DIN 65 according to DIN 11851 Product-contact materials: AISI 316 stainless steel and NBR elastomers Suitable media: wine, destemmed grapes, must, vinegar, oil, juices, and fruit/vegetable pulp Maximum fluid temperature: approx. 70 °C Performance curves: not available Spare parts: see the operating and maintenance manual with spare-parts catalogue Machine-specific operating data according to C.M.E.; dimensions according to the “Ideal 360” manual.

Condition: good (used), SCA pneumatically driven piston pump Max. temperature: 100 °C Material pressure: 350 bar Dimensions: H x W x D 2400 x 1200 x 800 mm Dsdpfxjwxw R Rs Ailjcn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), SCA air-powered piston pump SCA PPK57-200P8-R-E Dsdpfjwxw U Ajx Ailjcn Max. temperature: 100 °C Material pressure: 350 bar Capacity: 200 l Dimensions: 1050 x 650 x 2000 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,387 h, functionality: fully functional, overall weight: 191 kg, total length: 1,500 mm, The machine was a backup unit intended to ensure uninterrupted operation, but its capacity is now too small for our needs, so we are selling it. We’ve only turned it on occasionally over the past 10 years or so. It can be tested on-site. Dedoy Ncn Ajpfx Ailocn

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Dcodpfx Aijzb Etdjljn Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Dedpfsxygblox Ailecn Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: used, Year of construction: 2024, operating hours: 698 h, functionality: fully functional, machine/vehicle number: APP889037, overall weight: 3,500 kg, total length: 5,760 mm, total width: 1,987 mm, total height: 1,973 mm, motor manufacturer: Cummins B6,7, power: 231 kW (314.07 HP), fuel type: diesel, volume flow: 19 m³/h, pressure (max.): 25 bar, Equipment: type plate available, We are offering this used Atlas Copco X-Air+ 750-25 reciprocating compressor, manufactured in 2024, for sale. Model: X-AIR+ 750-25 Max. operating pressure: 25 bar Speed: 1920 rpm Engine power: 231 kW Permissible total weight: 3500 kg Support load: 70 kg Dedpfx Aioz A Daujlscn Axle load, axle 1: 1765 kg Axle load, axle 2: 1665 kg Serial number: APP889037 Date of manufacture: 05/2024 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. Dcsdpfx Asx Uwtdjiljn We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31927596, available immediately: RENNER Riko 960/270 ST-KT piston compressor with sound box with star-delta starter Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 69 dB(A) Dimensions L x W x H: 985 x 722 x 802 mm Weight: 206 kg We always have a large selection of new and used compressors in stock! Available immediately. Dcsdpfxexzgilo Ailjn

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Dcedpfx Aieyl Nz Hjlon Suitable for refurbishment or spare parts.

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction -Closed filling area with safety guards -Integrated control panel / HMI -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION Dcsdpfjzwwa Tjx Ailen The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.