Used Pilar Drill for sale (4,879)

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Godpfx Asz Dtaajkyekc Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW Gkedjz Dtxcjpfx Akyjc - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: good (used), travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 200 kg, table width: 300 mm, overall weight: 800 kg, type of input current: three-phase, table length: 600 mm, workpiece length (max.): 400 mm, Fast-Hole EDM Brand: Tecnosystem Model: D3-DM FAGOR 3-Axis NV 300E Coordinate Display Travel: - X-axis: 350mm - Y-axis: 250mm - Z-axis: 350mm Electrode rotation speed: 200 rpm Head travel: 200mm Table dimensions: 600x300mm Maximum workpiece weight: 200kg Dielectric fluid capacity: 200L Drilling capacity: Drill/electrode diameters from 0.3mm to 6.3mm. Maximum electrode length: 400mm Weight: 800kg The Tecnosystem D3-CM is a fast-hole EDM machine (or EDM drilling machine/super-drilling machine). Gjdpsz Dt Ukjfx Akyekc In machining workshops, it is commonly used as auxiliary equipment for wire cutting to create the initial holes through which the cutting wire is subsequently passed. Function: Fast drilling using an electric arc on conductive materials (hardened steels, etc.) using rotating tubular electrodes made of brass or copper. Key applications: Drilling threading holes for EDM wire, extracting broken taps, and creating small cooling or ejection holes in molds and dies. System: High-pressure injection of dielectric fluid through the tubular electrode.

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle. Godpfezzrdzox Akyjkc

Condition: used, bore capacity in steel (diameter) . mm throat 368 mm bore stroke . mm feed 0,1-6,18 m/min table surface area 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Gksdpfjz E Svcsx Akysc than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), CNC Flexible through-feed DRILLING, ROUTERING AND DOWEL INSERTING LINE Min/Max workpieces (panels) width (X axis) with Author 924: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 924: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 924: mm 100 /1600 (o 800+800) 200027A) Loader (Bridge Frame) "MAHROS" double station, Mod. Runner (max mm 1300) 200027B) Connection transfer unit "MAHROS" (90°) 200027C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 924 Gjdpfx Akjzza Nljyekc - N.4 Vertical electro-spindles (on the Y-axis) (Kw 6,6 ca.) - N.4 upper drilling units, each consisting of: - 1 vertical 36-spindle head - 8 (4+4) horizontal spindles on the Y-axis - 1 vertical 14-spindle heads (on the Y-axis) for fittings - N.2 horizontal units (1 R + 1 L) with N.1 21-spindle drilling head (2x21 = total 42) per unit - N.2 horizontal units (1 R + 1 L) with N. 6-nozzle injection head (2x6 = total 12) 200027D) Connection transfer unit "MAHROS" (90°) 200027E) Stacker (Bridge Frame) "MAHROS", double station, Mod. Runner (max mm 1300)

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis Gkodpfx Akozxc Ncsysc - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Gksdpfxezxhggo Akyoc Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass Gjdezyb Srspfx Akyokc EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Gkedpszr D Dnsfx Akyjc

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm Gksdpfx Aezr I H Tjkysc - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: Godpfx Akszumt Rjyokc We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 02206800, overall weight: 13,200 kg, total width: 6,000 mm, total height: 3,000 mm, total length: 26,000 mm, input current: 80 A, Equipment: documentation/manual, VOORTMAN V630M CNC DRILL LINE FULLY FUNCTIONAL, WELL MAINTAINED -INCLUDING INFEED & OUTFEED ROLLERS -AUTOMATIC TOOL CHANGER -3 SPINDLE DRILLING LINE -INCLUDING FULL SET TOOL HOLDERS -MAX. DRILL SIZE 40MM -30kW SPINDLE MOTOR -MAX. 3000RPM -MAX. PROFILE SIZE 1140X450mm -MIN. PROFILE SIZE 30X10mm -THREAD TAPPING M6-M30 Gedpfx Akez Ha Hfjyokc CONTACT FOR PRICE INQUIRY

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] Gedpfjz Ef R Tjx Akyjkc This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] The main features of the machine in the image: Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand

Condition: good (used), functionality: fully functional, Stroke: 40 mm, swiveling table, threading capability, spindle speeds from 60 - 1600 rpm, coolant. Gksdpfx Akoz E H Tveysc

Condition: ready for operation (used), functionality: fully functional, Union table drilling machine Gkedpfx Akez Ei Uceysc BFT 105 Heidenhain TNC 155 Year of manufacture: 1988 Table load capacity: approx. 4 tons 24 kW spindle: diameter 105 / SK 50 / S2000 Travel distances: 1750 x 1100 x 800

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Well, selling due to no usage. Gksdoz Ellwspfx Akysc

Condition: excellent (used), machine/vehicle number: 6710, drilling for concealed hinge installation laser pneumatic clamps drilling diameter of the central spindle: 0-70mm maximum drilling diameter: 45 mm pneumatic head movement mechanism for installing concealed hinges rotary head for three spindles in a line 230 V 1.1 KW year of manufacture: 2012 Gkjdpfsz D Ai Rox Akyoc

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Gkodpoz D D I Iofx Akyoc Speed infinitely adjustable Drilling head electrically adjustable

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm Gkodpfsz Euv Ejx Akyjc bore stroke 180 mm table surface area 765 x 620 mm

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic material feeding Gkjdpszz N N Ujfx Akyoc unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Table length: 6000 mm Table width: 600 mm Godpezz N T Tjfx Akyskc Max. drilling diameter: 40 mm Flow drill option Cooling system Year of manufacture: 2010

Condition: new, 18 mm M 12 M 14 MK 2 225-4.300 U/min. spindle stroke 80 mm Godpfx Akozz Aiheyjkc throat 190 mm column diameter 65 mm 300x240 mm 2 x 12 x 80 mm 75/357 mm 300x240 mm 2 x 12 x 80 mm 437/437 mm feed von Hand Handkurbel total power requirement 0,37/0,55 kW Machine height 840 mm

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm Gjdpfjz Df Txex Akyjkc - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 734, Drill diameter: 35/40 mm Spindle mounting: MK 3 Spindle speeds in 2 ranges and continuously adjustable: 160 - 2250 rpm Drilling stroke: 140 mm Overhang: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 250 kg Gkodez Divqopfx Akyjc Space requirement: 900 x 550 x 1830 mm