Used Pendulum for sale (417)

Condition: used, Year of construction: 2004, operating hours: 19,000 h, machine/vehicle number: D35601, The Senzani CM5 is a continuously operating, vertical cartoning machine from Senzani Brevetti, specifically designed for the precise packaging of individual items such as capsules, pouches, or smaller packaged products into pre-glued folding cartons. Machine features: Operating principle: Continuous motion for high process stability. Application: Vertical filling of pre-glued cartons, often combined with counting and dosing systems (coffee or tea capsules, lawn seeds, muesli, or pet food). Tjdpozp Iw Hsfx Amrjc Integration: Seamless integration into fully automatic primary and secondary packaging lines is possible. The machine operated for almost 19 years at Flechtorfer Mühle, where it was only used to fill one product. After being taken over by a birdseed company, it successfully completed a test run. Following the sale and a longer period without power, a software update from Senzani is necessary, costing approximately €12,000. A metal detector is included in the offer. A pendulum cup feeder can be purchased separately to ensure consistent feeding.

Condition: used, used, good conditionmake Pfeiffer-Piccolotype EP125motor 3 kWcutting height approx. 125 mmcutting width approx. 700 mmblade diameter approx. 450 mmroller table length right approx. 2300 mmroller table length left approx. 3500 mmwith stop flapspace requirement approx. 600 mm x 800 mm x 1800 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Tsdpovwfgrjfx Amroc

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. Tedpszkklpefx Amrjc • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: like new (used), Swing Chuck Parts from Headstock 51:36 388/01 Manufacturer: unknown Type: Swing Chuck Parts from Headstock Designation: Swing Chuck Parts from Headstock Tsdpfx Ajyrz Tnjmrjc Transmission Ratio: 51:36 Reference: 388/01 Article Number: 156116 Part Number: 50010002252 Condition: unused / original packaging Quantity: 2 pieces

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 140 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, controller model: Penta-Tec, overall weight: 6,000 kg, nominal power (apparent): 12 kVA, number of slots in tool magazine: 10, We are offering this used BAUER Bohrmax Z40 vertical machining center, manufactured in 2018, for sale. Manufacturer: BAUER Model: Bohrmax Z40 Year of manufacture: 2018 SCOPE OF DELIVERY / TECHNICAL DATA: • Spindle speed range: 140-2200 rpm • Drive for X, Y, Z axes: servo motor • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 6 m/min • Rapid traverse Z-axis: 6 m/min • Distance from top of table to bottom of tool holder: 700 mm Tjdpozlp T Iefx Amrsc • Tool holder: SK40 • Tool changer for 10 tools • T-slots: M12 • Drilling diameter: 3-32 mm • Thread drilling: M4 - M24 • Tolerance X-axis: ± 0.1 mm • Tolerance Y and Z axes: 0.06 mm • Drive motor for spindle: 7.5 kW • Light curtain at the front • Control: Touchscreen 18” • Chip conveyor with slat conveyor additional integrated equipment: • Automatic tool length measurement • Handheld control unit RCS01 • Software extension for pendulum operation + DXF package • Universally controllable hydraulic clamping system with 8 clamping points (manufacturer Polund - Pro-Clamp Systems) If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, OMNICORE 3303-2 Ethernet, Parallel, Air 3114-1 Multitasking 3113-1 Path Recovery 3020-2 PROFINET Device SW 3032-1_BASE_DIG_16IN/16OUT Pendulum Calibration Axis Calibration 🔧 Robot Service and Refurbishment We perform complete service and refurbishment of industrial robots. ⚙️ Spare Parts We sell spare parts and also provide professional repair and refurbishment services. 🤖 Robot Sales with Warranty We supply industrial robots with a warranty on commissioning or with a warranty of up to 12 months. 🏭 Over 13 Years of Experience Tjdpfxez Aiquo Amrjc We have been operating in the market for over 13 years and offer experience, technical expertise, and our own service infrastructure. Do you need service, a spare part, or a robot? Contact us.

Year of construction: 1980, condition: excellent (used), max disc diameter 400mm adjustment of the cut in three angles Tedpfx Amjm Ucyrjrsc motor power 2.2 kW cutting height 100 mm cutting width at 90° 850 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Todpfoy Diabex Amrec

Condition: used, Year of construction: 2010, mast type: telescopic, fuel type: diesel, Weights Empty weight: 8.200 kg Functional Lifting capacity: 227 kg Working height: 1.590 cm Tedpfx Amsv Tib Esrjc Dimensions of cargo space: 772 x 230 x 195 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1270 m Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SP14CJ Year of build: 2010 Condition: Used Data: Max. working height: 15,90 m Max. platform height: 13,90 m Max. reach: 12,70 m Drive type: Diesel Total dimensions LxWxH: 7,72 x 2,30 x 1,995 m Platform dimensions LxW: 2,36 x 0,86 m Max. basket load: 227 kg Swivel range: 360° Max. Pitch angle: 45% Own weight: 8.200 kg Special features: Rotatable work basket, four-wheel drive, pendulum axle.

Condition: like new (used), Year of construction: 1999, Manufacturer REMA Model / machine type DMRT 300 Year of production 1999 Todsxn A N Ujpfx Amrjc Machine category Crosscut Saw Location: Gorzów Wlkp. Delivery terms: Personal pickup

Condition: used, Year of construction: 2011, mast type: telescopic, fuel type: diesel, color: red, Weights Empty weight: 8.200 kg Functional Lifting capacity: 227 kg Working height: 1.590 cm Dimensions of cargo space: 772 x 230 x 195 cm CE mark: yes Condition General condition: average Tsdpfx Asv Ticiomrec Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1270 m Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SP14CJ Year of build: 2011 Condition: Used Data: Max. working height: 15,90 m Max. platform height: 13,90 m Max. reach: 12,70 m Drive type: Diesel Total dimensions LxWxH: 7,72 x 2,30 x 1,995 m Platform dimensions LxW: 2,36 x 0,86 m Max. basket load: 227 kg Swivel range: 360° Max. Pitch angle: 45% Own weight: 8.200 kg Special features: Rotatable work basket, four-wheel drive, pendulum axle.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Todoqu Sc Hjpfx Amrsc Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Tsdpfx Amjy D Enhjrec Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Suitable for pendulum machining (machining on one table, loading on the other).

Condition: like new (used), Year of construction: 2014, operating hours: 8,815 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, rotational speed (max.): 15,000 rpm, spindle nose: BT40, number of slots in tool magazine: 40, 5-AXIS MACHINING CENTER YCM TCV 3000A-5AX TECHNICAL SPECIFICATIONS • Model: YCM TCV 3000A-5AX • Year of Manufacture: 2014 Tsdjzcx A Uopfx Amrjc • Control: Heidenhain (5-axis simultaneous) • Travel (X / Y / Z): 3,000 x 800 x 800 mm • B-Axis (Swivel Head): 110º • C-Axis (Rotary Table): Ø 800 mm • Spindle Speed: 15,000 RPM • Tool Taper: BT40 Big Plus • Tool Changer (ATC): 40-station magazine • Through-Spindle Coolant: 20 Bar • Probing Systems: Renishaw RMP60 workpiece probe & Renishaw TS-27R tool setter • Workzone Divider: Partition wall for pendulum machining • Chip Management: Chip conveyor included • Usage: General subcontracting / job shop environment. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Tsdjzuw Eqopfx Amrjc Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: excellent (used), For sale is an industrial crosscut saw from the renowned German company Paul Maschinenfabrik GmbH & Co. Model 15 A0 is a reliable and robust machine, perfect for any sawmill, carpentry workshop, or pallet production facility, guaranteeing speed, precision, and cutting safety. ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Paul Maschinenfabrik GmbH & Co, Dürmentingen (Germany) Type / Model: 15 A0 Machine Number (Masch. Nr.): 8621628 Tjdpfozp Af Sox Amrjc Date of Manufacture (Liefertag): 17.03.1986 Motor Power: 3 kW (according to the nameplate, the machine's connected power ranges from 3 kW to 4.5 kW) Supply Voltage: 380 V / 50 Hz (20-25A fuse) Spindle Diameter: 30 mm Dimensions of work tables (included): Left feed table: 240 cm Right discharge table: 180 cm Maximum cutting width: Up to 450 mm - 500 mm, depending on the blade used and the final machine configuration. 🛠️ ADVANTAGES AND MACHINE FEATURES: Hydraulic drive: The saw blade advances hydraulically with the possibility of smooth adjustment, which significantly facilitates operation, ensuring smooth performance and reducing operator fatigue. Integrated clamping and safety: The hydraulic clamping system for the material being cut also functions as a blade guard, guaranteeing the highest safety standards at the workstation. Comfort and efficiency: Very long roller tables allow for convenient handling of even exceptionally long timbers or boards. Solid German construction: Durable construction (Made in Germany) ensuring stability, complete absence of vibrations, and very long service life, even with intensive use in a multi-shift system. 📍 ADDITIONAL INFORMATION: Condition: Used machine, in very good condition and fully functional. The machine is ready for on-site testing and immediate implementation in production.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability Tedpfx Amjwwau Norsc High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Tjdpfx Amezc D Agsrjc Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2007, mast type: telescopic, fuel type: diesel, Weights Empty weight: 20.400 kg Functional Lifting capacity: 450 kg Working height: 4.330 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 2438 m Max swing of platform in degrees: 360 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 1350SJP Year of build: 2007 Condition: Used Data: Max. working height: 43,30 m Max. platform height: 41,30 m Max. reach: 24,38 m Drive type: Diesel Total dimensions LxWxH: 14,89 x 2,49 x 3,05 m Length of transport position: 11,86 m Platform dimensions LxW: 2,44 x 0,91 m Max. basket load: 450 kg Tsdjz Eqp Iepfx Amroc Swivel range: 360° Movable up to working height: 43,30 m Max. gradeability: 45 % Wheel pressure (Support pressure): 120 kN Ground clearance: 0,30 m Empty weight: 20.400 kg Special features: Rotatable work basket, basket arm/vertical rotation angle 180°, all-wheel drive, (pendulum axle), (differential lock).

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: P260713248, 𝗢𝘃𝗲𝗿𝘃𝗶𝗲𝘄 The HOMAG VENTURE 115M is a high-performance, 5-axis CNC machining center designed for the precision machining of wood, wood-based panels, and similar materials. Its robust moving-gantry construction delivers outstanding rigidity, accuracy, and productivity for complex machining operations. 𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀 • 10 kW DRIVE5CS 5-axis spindle (8 kW continuous), 1,500–24,000 rpm. • A-axis: ±100°, C-axis: ±361°. • HSK F63 automatic tool interface with liquid-cooled spindle. • Suitable for milling, drilling, sawing, and true 3D machining. 𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗔𝗿𝗲𝗮 • X: 3,100 mm • Y: 1,250 / 1,415 mm • Maximum workpiece thickness: 160 mm • Clearance height: 260 mm 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗘𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 • 12-spindle vertical drilling unit. • Horizontal drilling: 4 spindles (X) + 2 spindles (Y). • Automatic 90° grooving saw. • 21 automatic tool positions (14 rear + 7 side magazine). 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗛𝗮𝗻𝗱𝗹𝗶𝗻𝗴 • Vacuum console table with LED positioning. • Divided vacuum zones for pendulum processing. • Pneumatic stops and adjustable vacuum consoles. 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 & 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲 Tjdpfxezmgkme Amrec • HOMAG powerControl with 21.5" Full HD multi-touch display. • woodWOP CNC software with integrated 3D visualization. • Professional CAD/CAM package supporting DXF, STEP, and IGES. 𝗦𝗮𝗳𝗲𝘁𝘆 & 𝗘𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆 • CE compliant with bumper protection and laser safety scanner. • EcoPlus energy-saving mode and remote diagnostics via TeleserviceNet. 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 Furniture manufacturing, doors, windows, architectural millwork, solid wood components, interior fit-out, and complex 3D machining.

Condition: like new (used), Year of construction: 2023, operating hours: 3,700 h, functionality: fully functional, Several robots of various models and manufacturing years are available. 1 unit of IRB 1600 with a payload of 6 kg and a reach of 1.45 m, manufactured in 2017. 2 units of IRB 1600 with a payload of 10 kg and a reach of 1.2 m, manufactured in 2023 (approximately 3500 operating hours). Specifications: 709-1 DeviceNet Master/Slave 888-3 PROFINET Device 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 616-1 PC Interface 617-1 FlexPendant Interface 623-1 Multitasking 996-1 Safety Module 1125-1 SafeMove Basic Pendulum Calibration Axis Calibration 1 unit of IRB 1600 with a payload of 10 kg and a reach of 1.45 m, manufactured in 2021 (approximately 5500 operating hours). Specifications: RobotWare_6.12.4008 613-1 Collision Detection 709-1 DeviceNet Master/Slave 617-1 FlexPendant Interface 623-1 Multitasking 611-1 Path Recovery 888-3 PROFINET Device 1125-1 SafeMove Basic 996-1 Safety Module 608-1 World Zones Pendulum Calibration Axis Calibration 🔧 Robot service and refurbishment We provide complete service and refurbishment for industrial robots. Tjdpfxeztl I Ro Amrsc ⚙️ Spare parts We sell spare parts and also offer professional repairs and refurbishment. 🤖 Robot sales with warranty We supply industrial robots with a warranty for commissioning or a warranty of up to 12 months. 🏭 More than 13 years of experience We have been operating in the market for over 13 years and offer experience, technical know-how, and our own service facilities. Do you need service, a spare part, or a robot? Contact us.

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Tjdpfxop Eb Dvj Amroc

Condition: ready for operation (used), Year of construction: 1996, Make: KGM Type: SK560 No.: 96-1600-1 Todezl Tuvjpfx Amrec Year: 1996 Cross-cut saw with a large cutting capacity; features hydraulic feed for the saw guard and discharge arms, and a pendulum-action saw blade; suitable for heavy, long workpieces such as glulam beams, etc. TECHNICAL DATA Infeed conveyor: 6 meters, 600 mm rollers Cross-cut saw with hydraulic power unit Cutting capacity approx.: 200 x 600 mm (height x width) Outfeed conveyor: 8 meters, 600 mm rollers + additional 2-meter conveyor section Power: 400 V, 50 Hz, 3-phase

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails Tsdpfx Asyfgzdsmroc 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Todezcwt Sepfx Amrsc Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.