Used Pellet Mill for sale (9,807)

Condition: used, inner taper of milling spindel / collet diameter / Iijdjzcq Hrspfx Abnof turning speed range / U/min

Condition: used, inner taper of milling spindel / Iedpfx Abshwt Elsneif collet diameter / turning speed range 1500 U/min

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB Iijdexmaqyjpfx Abnof SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Ijdpfoxwdygox Abneif Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Portal-Type Multitasking Turning and Milling Center in Gantry Design Brand: SCHIESS | Type: VMG 5-PS | Year of construction: 2010 / Start-up: 2011 The machine can be inspected by appointment. Condition: Operational / ready for use. Iiedpfsy Dvwyox Abnef TECHNICAL DATA: - X-axis (Gantry): 13.500 (20.000) mm - Y-axis (Support slide): 10.900 mm - Z-axis (RAM): 3.000 mm - Drive power RAM: 100 kW - Passage width max.: 6.500 mm - Faceplate diameter: 5.000 mm - Workpiece weight on the faceplate max.: 150 tons - CNC Control System: SINUMERIK 840D sl Additional excellent, comprehensive features. Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed ??range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Isdpfx Abozufi Ronjif Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Year of manufacture: 1988 Control system: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping surface: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 13826 Isdpfx Aezt U T Ajbneif

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A10 Year of construction: 1988 Control system: HEIDENHAIN TNC 355 Travel distances X/Y/Z: 1,300 x 630 x 630 mm Clamping surface: 1,700 x 630 mm Workpiece weight: 3,000 kg Operating hours: 25,845 Power: 19 kW Spindle type: ISO 40 Dimensions L/W/H: 3,870 × 2,630 × 2,200 mm Machine weight: 6,800 kg Iisdpszt U R Isfx Abnef

Year of construction: 2011, condition: excellent (used), Conical milling machine for orthotics and prosthetics. Suitable for the precise and easy production (grinding, milling) of prostheses or other orthopedic devices. Continuously variable speed control of the spindle, up to a maximum of 3500 rpm. Connection adapter for 5/8" tools. Working height 1000 mm. Iodpfxszu Trte Abneif Work light. Motor power 1.5 kW. Connection voltage 230 V – no high-voltage connection required. Adjustable extraction hood. Emergency stop button with restart protection. Good technical condition. Year of manufacture: 2011. Weight: 120 kg.

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, Ijdpfx Aezt Spnjbnjif 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Iodeyz R Unopfx Abnsif Dimensions: 700mm X 1450mm

Year of construction: 2005, condition: excellent (used), functionality: fully functional, - Maximum cutter diameter: 280 mm - Cutter bore: 40 mm - Manual feed - Maximum profile height: 200 mm Iiedpfx Absyyma Renjf Milling area: - Length: 400 mm - Depth: 110 mm - Height: up to 150 mm - Power: 2.5 kW at 400 V/50 Hz - Milling spindle speed: 2,800 rpm - Compressed air connection: 7 bar - Air consumption: 10 l per work cycle, 20 l with minimum quantity lubrication - Dimensions (L x W x H): 1,540 mm x 905 mm x 1,200 mm, weight: 248 kg

Condition: ready for operation (used), Koller Roller Mill,Roller mill, Roller Pan mill, Pan mill,Pan mixer, Used Machinery Model: Gebrüder Netzsch 205 ST; 251283 Dimensions: 1400 x 1300 mm Iiedpfx Abeuh Rkxsnef Weight: 735 kg Year: 1965 Electrical Data: 400 V; 50 Hz; 4/2.9 A Stone Size: 500 x 150 mm Koller mills are designed to ensure excellent grinding quality for all industrial applications. Whether it’s for minerals, cereals, or food products, Koller mills provide reliability and durability. Choose Koller mills to experience outstanding performance and long-lasting reliability!

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Iiodswrdu Aopfx Abnef Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Iodpfx Abszimw Eenjif Number of rotor blades: 3 Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used! PRICE REDUCED FROM 5950 TO 5350 EUR!!!

Condition: used, Second-hand profile cutter from Leitz for professional woodworking. This steel tool, featuring an RVZ-Z2 cutting edge and a 30 mm bore, is suitable for profiling work on wood-based materials. The profile cutter is designed for use on compatible woodworking machines. Technical data: Iedpfx Abozt Nyqsneif - Blade: RVZ Z2 - Cutting circle (ø): 122 mm - Bore: 30 mm - Marking: MAN - Length: 40 mm - Material: Steel

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table load: 11,000 kg, table length: 3,200 mm, type of input current: AC, workpiece weight (max.): 11,000 kg, overall weight: 18,500 kg, input voltage: 400 V, Technical Description Isdpjzu R Rasfx Abnsif CNC bed milling machine in very good condition, manufactured by MTE. Year of manufacture: 2006 Control system: HEIDENHAIN iTNC 530 24-position tool changer Chip conveyor Travel range: Longitudinal (X) = 3,000 mm Transverse (Y) = 1,200 mm Vertical (Z) = 1,500 mm Work table/clamping surface: Length = 3,200 mm Width = 1,000 mm Maximum table load: 11,000 kg Tool holder: ISO 50, DIN 69871 AD Draw bolt: DIN 69872 Form A Main drive: Maximum drive power: from 198 rpm, 30 kW Spindle speed range: Spindle speed = 20 to 6,000 rpm Feed rates: X, Y, and Z axes mm/min 2 – 15,000 Maximum rapid traverse rate: X, Y, and Z axes mm/min 25,000 Space requirement: Length approx. mm 8,100 (without transverse conveyor + 1,280 mm) Height approx. = 3,300 mm Width approx. (at Y = 1,200 mm) mm 5,000 Weight: approx. 18,500 kg Connection power: approx. 52 kVA

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We are offering the following machine for sale directly on behalf of the owner. It was delivered in 2026, but due to changed requirements, it will not be used. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° Ijdpfx Abszu Nz Denjif TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose – table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool interface: HSK63-A Speed max.: 18,000 rpm Power: 63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60 positions EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: CNC milling machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control Andronic 3D path control with Ethernet interface Travel ranges X/Y/Z 625/375/350 mm Tool changer, Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeat accuracy 0.002 mm Tool changer, 32 positions Iiodozu Nvbjpfx Abnsf Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 6,500.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant Iedex Sx Htjpfx Abnjif In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: Ijdpsxtu H Nefx Abnjif • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Iijdpfx Aszu Ni Uebnef Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted. Iiedpfx Abszu Nhwsnof

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Iodpfxow I Rz Ho Abnoif Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex-works: Bench drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2010 Spindle 125 mm Metric 80 / SK 50 spindle mount Iodpfx Aozu I Euebnsif Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Spindle / table installation height 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm For Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter boring head Various other accessories Weight 21 tons Price: EUR 9,500.00 plus VAT, ex-works.