Used Pellet Line for sale (10,282)

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Dcjdpfx Aioz Atinolon

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Djdszzmfaepfx Ailjcn Number of filling heads: 3 Filling capacity: 25 cans/minute Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) Dcjdpfxoim I Rue Ailon No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. Dcsdpov Dftxofx Ailen ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: used, Year of construction: 2014, Roll forming line Trima K2 with compact proofing cabinet G2-3 Suitable for round, long-rolled, enveloped, and flattened products, e.g.: hamburger buns, hot dog buns, mini baguettes Djdpfx Aisz A Ry Iolecn Dough divider and rounder K2 (year of manufacture 2014) Digital adjustment of weight, shaping chamber height, shaping speed, and shaping time Dough hopper capacity 25 kg with infeed belts Mehler for dough hopper, shaping chamber, and spreading belts Manual adjustment of pressing force for different types of dough Weight range: 25-95g / 50-150g With foot switch Touchscreen control with recipe memory Output: max. 3,200 pieces/h Proofing cabinet G2-3 (year of manufacture 2013) Proofing time approx. 3 min (depending on the upstream machine) Number of holders: 100 With motorized top belt including adjustable speed Manual removal of dough pieces

Condition: used, Dough band system WP Kemper Quadro Relax S Modularly designed, high-performance roll production line for processing roll doughs with long pre-fermentation times. Head machine with dough strand former, 2 x flour dispenser, RelaxS roller system, SoftCut slicing knife, rounding station, and extendable and cleanable EasyPull conveyor belt. Products: square small baked goods (TA: max. 170) Weight range: 25 to 1000 g / piece (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pieces/h (with 5-row operation) Dcedpfoz A R Sqjx Ailon Working width: 800 mm Discharge device with extraction length max. 2000 mm Touch screen control

Condition: used, Year of construction: 2005, Compact roll production line WP Rollprofi Year of manufacture: 2005 Dsdpfx Aoz A Sd Usilscn Condition: refurbished, cleaned & inspected Suitable for the production of sliced rolls, plain round rolls, long-rolled rolls, and double rolls Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounding machine, Multimatic Pre-fermentation time: 12 min (6 min before the long-rolling station and 6 min between the long roller and the cutting station) Proofing drying Maintenance-free proofing chain with automatic tensioning Variable depositing device for proofing trays of the 3 Euro sizes: 400x600 / 580x780 / 580x980 mm Sterilization station Siemens touch screen control Dimensions (LxWxH): 3000x1250x2550 mm

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 1x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) Dcodpfx Aiov T Ttxslon 2x hydraulic lifters (200-900mm height)

Condition: used, mileage: 207,417 km, power: 125 kW (169.95 HP), first registration: 03/2015, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, number of seats: 24, total length: 7,500 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, = Additional Options and Equipment = - Air conditioning (driver) - Webasto heater Dcsdpfx Aioztw N Hjlon = Further Information = Damages: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for purchasing and selling used buses. We have an extensive parking area which serves as our display lot. We always have a large selection of buses from various brands, capacities, models, and at all price points in stock. We can find the right coach, school bus, or city bus to fit your needs and budget. All information without guarantee. Errors, prior sale, and typing mistakes excepted. Viewing hours for used buses: Mon.–Fri.: 08:30 – 12:00, 12:30 – 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, mileage: 15 km, power: 129 kW (175.39 HP), first registration: 04/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none = Company information = Dcedpfxey Iciqo Ailjn We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: good (used), Year of construction: 2014, Koenig Combiline bun production line - used - year of manufacture 2014 - Rex Futura Classic divider - weight range 20-135 g - computer control Dedpfx Aozz Ryzoilecn - maximum output 7,500 units/hour - rounding station, pre-proofing station, stamping station, bun discharge onto trays or baking pans - machine from production - inspected and cleaned - collection from warehouse/shipping option available - price upon request

Year of construction: 2011, condition: excellent (used), For sale: a complete unit for processing green peas, combining a winnowing machine, a de-stoner, and a screening/washing machine in one. Capacity: approximately 10 tons/hour. Dcjdpfx Aiezhv Nuolsn

Year of construction: 2012, condition: excellent (used), Welding and cleaning line in a 90° configuration, running from right to left, consisting of a 4-head welding machine SMK 504, a cooling table, and an automatic cleaning machine EPA 479 with a turning station. Maximum welding size = 3,570 mm x 2,500 mm, currently programmed for Kömmerling 76 AD, 88 MD profiles. CNC cleaning machine with corner and shear hinge drilling device for Siegenia fittings, sealing strip holder, WINDOWS control system on the welding and cleaning machines, and safety fences. Dcodpfx Aiez Dihyslsn Currently set for V-groove processing.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features Dcjdoy Alcispfx Ailen • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 1568.14, Technical specifications: Model: OptiCut S75-4 Maximum pusher length : 6300 mm Dodpfx Aioz Dp D Uslscn Sawblade diameter : Ø 600 mm Year of construction: 2003 Maximum cross cutting sections : 360 x 30 mm / 240 x 160 mm Rotary current: 400 V / 50 Hz Nominal output: 11 kW Fuse protection: 25 A FRIULMAC 45 degree waste conveyer Outfeed : 1500 mm driven band conveyer Brand new software/control panel /PLC

Condition: like new (used), Year of construction: 2022, Infeed height 900 mm Infeed width 300 – 800 mm Dsdsxwxdgjpfx Ailocn Non-ferrous metals: Either 0.6 – 0.8 mm or 0.8 – 1.0 mm (has to be set before ordering) Non-ferrous metals: 1.0 – 1.2 mm (only with façade profiles) Steel (320 N/mm²): 0.55 – 0.70 mm Stainless steel: Max. 0.5 mm 3,830 mm x 2,045 mm x 1,275 mm 1,770 kg

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller Dcjdpfsx Ah A Aox Ailjn - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump Dsdezx Rkzepfx Ailjcn - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. Djdpfx Aioz Arqkelocn The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Year of construction: 1996, condition: used, Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible. Dodpfxoz Da R Ss Ailocn

Condition: used, Year of construction: 1996, operating hours: 12,171 h, total width: 2,300 mm, total height: 2,400 mm, total length: 9,000 mm, Colour: Grey Empty weight: 10.000 kg BOERE sanding line 'Compact' Elite Year of construction 1996 (CE) 12171 Operating hours Maximum height 150 mm Maximum width 1300 mm Elite BKKS 1300 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 183Amp Elite TKKS 1100 First generator 45kW engine Second generator 30kW engine Third generator 18.5kW engine Voltage 380V, 172Amp Revised by Boere in 2019 Dcjdpfx Aiswnh Eqsljn - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Bottom sander: - CE certificate present: No - Serial number: 98015305 - Operating hours: 12171 - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Contact roller material: Steel - Number of contact rollers [pcs.]: 2 - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Top sander: - Max. working width [mm]: 1300 - Max. working height [mm]: 150 - Sanding belt length [mm]: 1900 - Sanding belt width [mm]: 1310 - Motor power first unit [kW]: 45 - Motor power second unit [kW]: 30 - Motor power third unit [kW]: 18.5 - Feed motor [kW]: 2.2 - Number of contact rollers [pcs.]: 2 - Contact roller material: Steel - Number of combi units [pcs.]: 1 - Number of steel rollers [pcs.]: 2 - Number of motors [pcs.]: 3 - Belt blow-off system present: Yes - Structuring brush present: No - Brush present: Yes - Sanding pad present: Yes - Segments present: Yes - Voltage [V]: 380 - Current consumption [A]: 172 - Transport dimensions: 9000mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2012, Inline cooking line for pasteurizing processed cheese, heating from the initial mixing temperature to approximately 85°C for filling or further processing. Dcjdpfozxc Dmex Ailsn The line consists of: Buffer Tank The buffer tank is used for the temporary storage of processed cheese prior to further processing or filling. The product is maintained at approximately 15°C to preserve quality and ensure optimal viscosity. This stabilizes the process flow, balances fluctuations in upstream and downstream operations, and helps maintain consistent product properties. Volume: 400 kg Model: Zufühfbehälter 400 Type: 670 Machine No.: 14616 Installed power: 22 kW (46A) Year of manufacture: 2012 The buffer tank is equipped with: - Tank with 2 feed augers, CIP cleanable. - Stainless steel covers - Load cells for weight indication on the buffer - Outfeed pump - CIP return pump (Fristam model: FPE3532/155, 7.5 kW) Inline Cooker The inline cooker is used to continuously heat and process the cheese mixture from approximately 15°C to 85°C. During this step, the product is thermally treated and homogenized by a high-shear mixer to ensure optimal mixing of steam into the product and to achieve the desired structure and consistency. This ensures efficient processing, uniform product quality, and a stable flow for downstream operations. Heating unit specifications Model: FL / Erhitzungseinheit Type: 261 Machine No.: 14217 Installed power: 17 kW (37A) Year of manufacture: 2012. The controls are excluded.

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Dsdszynmvopfx Ailscn

Condition: used, machine/vehicle number: 007811, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Djdpfsv Dyxcsx Ailjcn Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB Position 5: Panel Turning Device BIESSE - RBO-STREAM SB Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Djdpfewuclrox Ailscn