Used Part Cleaning Machine for sale (71,105)

Year of construction: 2025, condition: as good as new (ex-display), Spray cleaning system - Parts washing system with hinged door 1-tank version (washing), tank vol. 320 litres basket: LxW 1.100 x 1.100 mm useful height: 800 mm max. loading weight: 700 kg pump pressure of washing pump: 4,3 bar, pump power: 5,5 kW heating (electric) 20 kW; heatable up to 80°C control: Siemens Logo Podpfx Aasd Rkmxelepl inclusive - steam vapour extraction and condensation water return - automatic water refill - autom. chemical dosing (0,8 - 5,5%, adjustable) - insulation of the complete plant - plant completely made of stainless steel 1.4301 - basket rim (removable on one side) - 7-day timer for the electr. heater - E-spray pipe h= 450 mm - Preparation for oil separator (electrical and mechanical) available New unit; currently used in our technology centre for washing tests

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-flood cleaning system - Parts cleaning system for the highest requirements or precision and ultra-fine cleaning basket dimensions: LxWxH 600x400x300h mm max. loading weight: 150kg; loading trolley in front of the unit included Psdpfx Aeg Itg Esalspl 3-tank version: Cleaning (600 liters) Rinsing I (600 liters) Rinsing II (600 liters) Plant electrically heated - Cleaning method: Spraying, injection flooding, ultrasound - Ultrasound (rod transducer): 3,000 watts eff. / 6,000 watts peak - 30kHz - Basket during cleaning, rinsing and drying process standing, swiveling or rotating (freely selectable in the program) - Hot air and vacuum drying (vacuum pump Fab. Busch 300 m3/h) - full filtration of all tanks (3), each with Topline bag filter (Fab. Eaton), filter fineness freely selectable - automatic water refill per tank - automatic chemical dosing (0,4 - 4%) at tank 1 (cleaning) - preparation for coalescence oil separator - preparation for installation of a VE-circulation system for treatment of rinsing water control: Siemens S7-1200 with 20 programs

Year of construction: 2025, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Psdpfsfzblqex Aalopl

Year of construction: 2025, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Pjdpfxjfl Ufze Aalopl

Year of construction: 2025, condition: as good as new (ex-display), The spray cleaning system "RH S" is a compact, space-saving, automatically operating cleaning system, which meets high demands regarding cleaning/degreasing and drying results. The cleaning of the components can be carried out with the basket standing, swiveling/oscillating and rotating. The nozzle system - several nozzle sticks on the longitudinal and front sides - are permanently mounted in the working chamber. Psdpfx Ajgrm Dfjaljpl Basket dimensions: LxWxH 470x3200x200(h) mm 2 baskets can be washed in parallel (simultaneously) max. loading weight: 100 kg Spray pressure (washing): 4 bar, circulation capacity: 360 lit./min. control: Siemens S7-1200 with touch panel KTP700 including hot air drying (12 kW) including compressed air impulse blowing including steam vapor extraction including stainless steel outer cladding including preparation for retrofitting of an oil separator including bag filter for medium maintenance including 2 pcs. stainless steel baskets 470x320x200h mm dimensions of the unit: LxWxH 1.425x1.920x1980(h) mm Dimensions including opened loading door Connected load (electrical): approx. 25 kW

Year of construction: 2025, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. Psdpehgh I Sjfx Aaljpl - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Ppjdjwdfnzjpfx Aaljl The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Year of construction: 2017, condition: used, machine/vehicle number: IntNr231417, Technical Description – PERO RO Manufacturer: PERO AG Model: RO R1 / 414-EX Year of manufacture: 2017 / 10 Machine type: Cleaning system / Degreasing unit Process: Solvent cleaning (e.g. modified alcohols or hydrocarbons) Technical data (typical for this series): Cleaning system: Closed-loop, fully automatic Working chamber dimensions: approx. 530 × 320 × 200 mm Max. batch weight: approx. 50 – 80 kg Solvent: Modified alcohol (hydrocarbon-based) Drying: Vacuum drying Control: PLC control with touch panel Equipment: Integrated distillation unit, filtration system, oil separator Power consumption: approx. 10 – 15 kW Vacuum pump: Integrated Condition: Very good, well-maintained condition – from ongoing production Special features: • Energy-efficient cleaning system with closed solvent circuit • High cleaning quality with minimal solvent consumption • Ideal for precision engineering and machining businesses The machine can be inspected under power by prior appointment. Psdpfxex Sv Uze Aalopl Subject to technical changes, errors, and prior sale.

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. Pjdsvtnfpspfx Aaljpl We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm Ppsdpfx Aaj Syv Toljl cutting length: 5 - 70 mm output: 400/min. complete with ciller and motorized decoiler

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Ppodovvww Tjpfx Aalol Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Good condition

Condition: excellent (used), Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system Podpfxjwaiv Uo Aalopl -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

Condition: used, Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg Psdpfjcmh H Rex Aalepl

Condition: like new (used), Year of construction: 2018, Danube Industrial Laundry Dryer Powerful dryer with condesator for hotels, pensions and large families We also have a suitable washing machine 32 Ah connection TOP CONDITION CAN BE TAKEN IMMEDIATELY IN OPERATION WITH QUESTIONS PLEASE ANNOUNCE Pjdpfxsc Utids Aalepl VIELLENDAN IN ADVANCE

Condition: good (used), functionality: fully functional, A lot of parts for Index K-16 machine collets, curves, tool holders, shafts, gears, slides, distance rings, end switches, etc. See attached photos. Pjdpfjx Ty Uusx Aalspl

Condition: new, Year of construction: 2026, Metalclean P80 spray cleaning system in stainless steel. Single-tank spray cleaning system with rotating basket. Usable dimensions: D = 780 mm, H = 430 mm Psdpfx Aoir Apvjalepl Load capacity per batch: 100 kg Tank volume: 130 liters Spray pressure: 3 bar Operating voltage: 3 x 400 V/N/PE 50 Hz Oil skimmer

Condition: good (used), functionality: fully functional, Manual control units with 20 meters cable length Ppedpfx Ajxg Rn Njalsl

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Ppjdsxyk Trspfx Aaljl

Year of construction: 2000, condition: used, functionality: fully functional, machine/vehicle number: 200158, We offer this used MTM RWST 650 cleaning system, year of manufacture 2000. Manufacturer: Meißner Technik Müllenbach GmbH Machine type: RWST 650 Machine no.: 200158 Circuit diagram no.: 200158 Piping diagram: HR.9000:00 Year of manufacture: 2000 Ppjdpfx Aaox Sx S Aoljl Operating voltage: 3/PEN 400 V Frequency: 50 Hz Control voltage: 24 VDC Total connected load: 100 kVA Rated machine current: 153 A Main fuse in supply line: Slow-blow rated current: 200 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Pjdpfx Aaohl H Ubjlspl

Condition: new, Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Psdondcbyepfx Aalepl

Condition: used, Year of construction: 2003, Standard configuration Siemens Operator panel front: 1P 6FC5203-0AF52-0AA0Siemens MCP 19", KEY, MPI Layout Laser 1P 6FC5203-0AF52-1AA0CPU: 1P 6FC5247-0AF08-2AA0 Ppjdpfx Aeuqd D Eealjl without refurbishment

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard Ppedpfxsrbf R To Aalsl - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature Psdpfx Aasrbid Ijljpl - Ability to automatically center and square the profile

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles Pedpfxorbg Euj Aalopl • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels