Used Paper Band Filter for sale (13,089)

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS Bandsaw Type BSB 600 Stand in modern steel construction, table top made of thick-walled, heavily ribbed cast iron, massive gray cast iron bandsaw wheels Technology: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed gray cast iron table • Table top can be swivelled up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber coverings • Fence rail can be used on the left of the saw blade • Fence profile can be folded over • Blade tension indicator • Mechanical height adjustment via handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height 380 mm • Max. cutting width 570 mm • Table size (W x D) 590 x 810 mm • Table height 905 mm • Wheel diameter 600 mm • Motor power 2.2 kW • Wheel speed 820 rpm • Max. saw band length 4710 mm • Suction nozzle diameter 2 x 100 mm • Machine weight 272 kg Gujdpfsbzmb Hex Angeh • Machine size (L x W x H) 1120 x 750 x 2125 mm Location: Available in stock, Bitburg Top exhibition price Free loading

Condition: excellent (used), Bandsaw Manufacturer: Kolle Model: SR 400 Throat depth: 380 mm Cutting height: 300 mm Table size: 600 x 550 mm Table surface tilting and swiveling Gsdpfx Anjxcx Txjgouh Width: 950 mm Depth: 770 mm Height: 1860 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Gjdpfx Anoxc Hhkegjuh

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) Gsdpfx Aned Iipzogsuh • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Guodoz Dtbdjpfx Angjh Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Guodpfszb Aicjx Angoh Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, SALE – 5% OFF CNC COLUMN TYPE METAL BANDSAW M2-330C The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Guedpfxjzd T H Ao Angjh Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: good (used), Year of construction: 2014, functionality: fully functional, total width: 1,160 mm, filter area: 115 m², total length: 3,300 mm, total height: 4,000 mm, Good morning, We are offering for sale a professional, high-performance bag filter in a built-in design, intended for dust extraction, pneumatic transport, and separation of dry dust in woodworking and furniture manufacturing plants. We used this filter to extract dust from a multi-blade saw used for cutting fiberboard. Key technical parameters: • Airflow: 11,000 m³/h • Filter area: 115 m² • Number of filter bags: 60 pieces (length 3000 mm, antistatic fabric) Gjdpfx Anez E Rq Segsuh The unit operated flawlessly until it was dismantled. It is currently being dismantled due to the company's expansion and the acquisition of additional machinery. Location: Stary Szelków 62, 06-220 Szelków Unit dimensions: 1.42 x 3.3 m (as shown in the attached photo) Net price: 35,000.00 PLN (negotiable), gross price: 43,050.00 PLN

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L Gsdpszfqgijfx Angjuh make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: used, The Josef Foellmer Iram 16, serial number 2037, is a robust four-head paper drilling machine designed for precision and efficiency in professional finishing environments. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting its durability and careful maintenance. With its four drilling heads, the Iram 16 offers flexibility for a variety of drilling patterns and applications, making it a reliable solution for bindery and finishing operations that require accuracy, consistency, and productivity. Equipment: Gjdpfx Aexb Dpijngouh Good condition without any damage 4 head paper drills

Condition: used, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 410 mm, cutting width (max.): 480 mm, control type: manual, roller diameter: 500 mm, pivoting range: 46 °, actuation type: electric, rotational speed (max.): 900 rpm, overall weight: 250 kg, table height: 850 mm, SAC BW 500 Band Saw For sale is a robust SAC BW 500 band saw for professional woodworking. The machine impresses with its solid construction and generously sized work table. The band saw table is made of gray cast iron, heavily ribbed, precisely planed, and adjustable in angle. The band saw features mechanical height adjustment, a blade tension indicator, and an upper precision band saw guide. The parallel fence can be used on both the left and right sides of the band saw blade. Features: - Manufacturer: SAC - Model: BW 500 - Wheel diameter: 500 mm - Cutting width: up to approx. 480 mm - Cutting height: up to approx. 410 mm - Table size: 550 x 700 mm - Table height: approx. 850 mm - Band saw length: approx. 4,100 mm - Blade dimensions: 25 x 4/10 mm - Wheel speed: 900 rpm - Motor power: 3 HP - Mechanical height adjustment Gujdpfxez Ig Rys Angsh - Blade tension indicator - Rubber tires - Adjustable gray cast iron table - Dust extraction port - Upper precision band saw guide - Telescopic guard - Motor protection switch with undervoltage release - Electrical system according to VDE 0113 - Parallel fence can be used on both sides The technical specifications correspond to the SAC product brochure for the BW 500. It describes, among other things, the solid gray cast iron construction of the wheels and the table, as well as the rubber tires for smooth and precise operation. sac_bw_de The machine is in used condition, with signs of wear consistent with its age. Ideal for carpenters, joiners, and woodworkers looking for a solid and durable band saw. Inspection and test run possible by arrangement.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, baghouse dust collector Power: 15 kW Airflow rate: 7,200 m³/h Number of collection bags: 3 Number of filter bags: 45 Filter bag diameter: 20 cm Filter bag height: 150 cm Guodez D Eqwspfx Angsh

Condition: used, Year of construction: 1990, 260 mm Rund documentation vorhanden automatic feeds ja ja weight of the machine ca. 2,2 t dimensions of the machine ca. 1,7 x 2 x 2 m Godpfx Aoz D Iu Sengjuh

Condition: used, Year of construction: 1978, machine/vehicle number: 72418, with manual hydraulics and 79x plastic filter plates Guodpfjz Icp Esx Angeh 1x VA starter plate 1x VA end plate Plates maximum: 150 Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 380x100x140 cm Distance between first plate and spindle approx ca. 200cm

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Gjdpfx Ansz Epy Ssgeuh Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) BEHRINGER screw-type chip conveyor (Pos. 105) Automatic bar-end detection (Pos. 535) Lighting (Pos. 941)

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults Gsdsz Hvmhopfx Angouh Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm Gedpfx Aohvtcisngjuh -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material Godsd Iiprepfx Angjuh lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: new, 355 mm Gjdpfjfm T Hbox Angouh 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Gjdpfx Aegd Si Esngeuh Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Gujdevkyd Sjpfx Angoh Base frame Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Gedovk Sfbopfx Angjuh Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Gsdpfju Rdr Rjx Angjuh Quick rip fence for straight cuts

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Guedped Hx Uqjfx Angjh Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 800 mm, stack height: 100 mm, overall weight: 900 kg, type of input current: three-phase, front table length: 1,500 mm, total width: 1,500 mm, input current: 380 A, total length: 1,950 mm, input voltage: 4 V, Equipment: safety light barrier, Robust, programmable guillotine that can be integrated into a workflow, with hydraulic drive and an 18.5” touchscreen display. Gsdpfxsyrqnhj Angeuh A barcode reader can be added for automatic job selection. Extensive programming options, with a memory capacity of 1998 programs. The machine frame has enhanced stability and is optimized for high cutting force absorption and maximum cutting precision. The Mohr 80 guillotine is designed for single-shift operation. Precise cutting is achieved hydraulically. This allows the time the blade spends at the bottom dead center to be adjusted to the type of material. The ultra-smooth stainless steel table, equipped with air jets, allows for easy material handling. The press force can be adjusted over a wide range of pressures, adapted to each material via a scaled button. Bright LEDs clearly mark the cutting line for the operator. The machine is operated via an ergonomically positioned control panel with a 18.5" touchscreen display. It can be integrated into a workflow. Cutting data is taken directly from prepress via Compucut® (optional, costing 5,500 euros). Recurring cutting sequences can be memorized (memory capacity of 1998 programs) and adjusted at any time. Technical data PLUS 80: Maximum cutting width 800 mm Maximum feed depth 800 mm Maximum feed height 100 mm Minimum pressure 180 daN Maximum pressure 2,700 daN Ram speed during return (0 - ...) 130 mm/sec Smallest automatic cut without a false plate 15 mm Smallest automatic cut with a false plate 50 mm Dimensions MOHR 80 PLUS (w × d × h) 1,500 × 1,970 × 1,500 mm Total weight 900 kg Electrical power supply (apparent power) 4.0 kVA Includes 2 HHS blades. Includes left and right tables. Includes light curtain. Includes 1 additional carbide blade. Includes 1 additional PREMIUM carbide blade. Compucut® with P-Net Connect (original optional purchase cost was €5,050.00)