Used Paper Bag Making for sale (12,103)

Condition: used, The device is ready for operation. The machine has two weighing systems, meaning that while one system is dispensing, the other is filling, and they alternate. When both systems are full, the machine shuts down. The output for a 20 kg bag is 5500 kg, and for a 10 kg carton, it is 3500-4000 kg. The total height of the machine is 3500 mm. The machine also includes a receiving/inspection conveyor equipped with a scale. Ppedszhfypopfx Aahju Please check out my other listings.

Condition: excellent (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, cutting width (max.): 475 mm, stack height: 80 mm, input voltage: 230 V, The machine is in perfect working order and in excellent condition. The next inspection is not due until March 2028. 3 brand new blades are included. Podpfxszha U Ue Aahopu

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Ppedoxwaikopfx Aaheu Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Faldo cutting machine, 72 cm, in very good condition and available immediately! Ppodezfgrbopfx Aahsu All of the equipment mentioned is not for sale or resale in Russia, or in any country subject to an EU embargo.

Condition: used, machine/vehicle number: 17184, Year of construction: 2019, overall weight: 696 kg, load capacity: 3,200 kg, load center: 675 mm, working range: 1,350 mm, enginetype: undefined, manufacturer: Kaup Psdjzg Shwspfx Aahepu

Condition: ready for operation (used), Offered is an electric stack cutter. Cutting length: 650mm, Cutting height: 80mm, Residual cut: 25mm, Insertion depth: 610mm, Drive: electromechanical, Control: manual with hand crank. Equipped with spare blade, blade box. Weight: approx. 200kg, Overall dimensions X/Y/Z: approx. 995mm/1260mm/1220mm. Viewing by appointment possible. Pedpfxszg Irfs Aahspu

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel Ppedpsydqahefx Aahou 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: excellent (used), functionality: fully functional, Factory closure for mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Ppsdpsxqgffsfx Aahsu

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 1,642 mm, total height: 2,055 mm, total width: 3,594 mm, input voltage: 220 V, overall weight: 1,834 kg, compressed air connection: 6 bar, warranty duration: 12 months, working height: 850 mm, Equipment: documentation/manual, EDDA NEOBOX Series | High-Performance Intelligent CNC Cardboard Box Making Machine The NEOBOX Series is a state-of-the-art, fully automatic CNC cardboard box cutting and creasing machine engineered to deliver just-in-time, made-to-measure packaging solutions. Featuring industry-leading automation, premium components, and an intelligent zero-waste design, it eliminates standard packaging inventory costs and optimizes cardboard consumption. Next-Generation CNC Control & Advanced CAD/CAM Software: Elite Italian TPA CNC Controller: Powered by a Windows-based industrial OS and driven by the prestigious Italian TPA CNC system, backed by 40 years of specialized cardboard software expertise. Free Integrated CAD/CAM Software: Supplied with an advanced, complimentary CAD/CAM suite, allowing customers to design unlimited custom boxes without restriction. 50+ Pre-loaded FEFCO Codes: Over 50 standard FEFCO packaging designs come pre-programmed and ready to manufacture instantly. One-Click Macro Operation: Custom layouts can be saved as macros. An unskilled operator can easily run the machine simply by selecting the template and entering 3 dimensions (Length, Width, Height) and the desired quantity. Smart Production & Advanced Waste Reduction: Dual-Zone Stock Feeding: Equipped with left and right working zones, accommodating two different cardboard sheet widths simultaneously. The machine automatically selects the best width to minimize waste. Automatic 90° Orientation: The intelligent software automatically rotates the box layout 90 degrees if it results in lower material waste. C-Suite Multi-Magazine Upgrade (Optional): Can be retrofitted with the "C-Suite" system holding up to 10 fanfold cardboard magazines of varying widths, slashing material waste down to a minimal 2% to 3%. Side-by-Side Multi-Production: Configured to process 2 or 3 narrow cardboard sheets simultaneously (depending on blade setup), multiplying production output by 2x to 3x. High Speed, Premium Components & Smart Industry 4.0 Integration: Outstanding Output: Delivers high-speed cutting and creasing, producing between 2 to 10 boxes per minute (depending on box complexity and dimensions). World-Class Hardware: Fully integrated with ultra-reliable Panasonic servo motors & drives, alongside premium SMC or Festo pneumatic systems. Seamless ERP & Smart Scanning Integration: Features XML-format data structure for full integration into user ERP systems for continuous, fully automated, operatorless inline workflow with real-time ERP feedback. Barcode & QR Code Automation: Connects via wired or wireless barcode/QR scanners to automatically generate custom boxes on-demand, completely removing operator error. Remote Office Planning & Control: Fully operational from the central planning office via integrated remote desktop software. Podpfx Ajy Iby Ieahepu Integrated Intelligent Printing (Optional): Optional label printer integration for automated batch, single, header, or footer labeling. Scalable Blade Tooling: Standard configuration begins with 7 vertical blades and is customizable up to 16 blades for advanced, complex packaging designs. For specific engineering inquiries, customized configuration proposals, or an interactive video demonstration, please submit an inquiry form directly via Machineseeker.

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation Ppjdpfx Aszg D I Nsahou - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 08/2027, machine/vehicle number: 2026, NEW NEW Bag/Pack Closure Machine NEW NEW Automatic and manual operation Clip band machine with date printing Stainless steel construction Single-person operation Packaging of baked goods such as bread, sliced bread, rolls, croissants, etc., as well as other food and non-food products Connection: 230V New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Clip band Maintenance contract Service package Delivery service Training & commissioning Visit our large exhibition! Psdjw S Slhjpfx Aahjpu

Condition: ready for operation (used), Year of construction: 1988, Polar 55 em Year of manufacture: 1988 Spare blades Program Available immediately Psdpjzgx I Rsfx Aahopu

Condition: good (used), functionality: fully functional, Production line for sealed block-bottom bags Psdpfx Aaozgwnishopu The machine can also be used as a standard block-bottom machine for paper. The necessary parts are available. The sealing unit can also be used offline without a bridge. Pre-printed bottom sheet Self-adhesive bottom sheet In-line coding printer Material: Paper and composites Format: Bag width: 140 mm - 320 mm Bag length: 240 – 900 mm Bottom width: 70 – 180 mm With servo drive - Block-bottom standard materials: Uncoated paper: 70 g/m² and 100 g/m² Coated paper: 80g Plastic films (LDPE): 40 µ, 70 µ and 100 µ PE-coated paper: Pa 60 g/m² + LDPE 40 g/m² Airsickness bags: Pa 65 g/m² + LDPE 23 g/m² Paper-aluminum-PE composite: Alu 8/25 and Alu 8/50 PET/Alu/PE composite: PET 12 µ / Alu 8 or 9 µ / LDPE 90 µ - Possible materials Outer layer Coated paper 60–120 g/m² Over 100 g/m² only in large format Inner layer LDPE mono-film 0.03–0.10 mm (optionally needled) Alternatives: LDPE 0.08–0.12 mm OPP 20–40 µ PE-coated paper (various combinations) Aluminum foil on carrier paper with PE coating Construction from outside to inside 30 g/m² bleached kraft paper 12 g/m² PE 0.008 mm aluminum foil 25 or 50 g/m² PE Intermediate layer (only with material 21) Alternative: Bleached kraft paper 80–100 g/m² Brown kraft paper 80–100 g/m² LDPE 80–100 µ

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Serial number – AC-6B140510037. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Pjdoy An I Iopfx Aahjpu 1 x Keymac vertical form, fill and seal twin bagging machine. Model – BT2600 VFFS. Serial number – 7090. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox Iridesse Production Press’ colour production system Items for sale: 1 x Xerox Iridesse Production Press with the following specifications: Includes Fiery Server NX PRM-17 (EX-P6) Includes A-CF03 paper deck Includes stacker including 2 additional colour sets (6 colours) Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 6,817,985 pages Colour: Approx. 6,076,014 pages Black: Approx. 741,971 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Ppjdozdq H Hopfx Aaheu Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. Ppedpfx Aaoy Ttrmjhju If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: good (used), 1 x Weighing and Bagging System Pjdpjzgc H Dsfx Aahepu Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: used, functionality: fully functional, FOREL Ppsdoy If Ayepfx Aahou Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: Ppsdpfxsy I Sd Re Aaheu TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Mangle Dimensions 5500x2800 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1973, total width: 1,950 mm, total length: 5,650 mm, total height: 1,920 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 7 bar, overall weight: 2,300 kg, type of input current: three-phase, CAPACITY 250 pcs/min CAPACITY (REINFORCED BAG) 100 pcs/min BAG WIDTH 830 mm BAG LENGTH 70-1000 mm BAG THICKNESS 0,020-0,100 mm QTY OF SERVO MOTORS 4 pcs TOTAL POWER 11 kw MACHINE WIDTH 1760 mm MACHINE LENGTH 5650 mm MACHINE HEIGHT 1920 mm MACHINE WEIGHT 2300 kg STANDARD FEATURES - Thanks to the touch operator panel, the bag size, the number of bags, the production speed, the number of bags in the package can be seen, the number of stops in the total count. - There is 1 photocell for cutting printed and unprinted bags - Servo motor controlled pulling rollers help cutting at high speed and with the desired measurement precision. Podpozga T Isfx Aahepu - Thanks to the servo motor controlled welding jaw, strong and quality welding is ensured. - Thanks to the servo motor controlled belt system, the belts work synchronously to the stacking system. - Stoper roller system with servo motor controlled for better stacking - Warp rolls inverter tension control systems - With pneumatic ballerina system - Automatic edge control systems - Automatically stops when the roll is finished - Photocell stops automatically when printing place is not correct - Ability to work in PP, OPP, CPP, High Density Polyethylene ( HDPE ), Low Density Polyethylene ( LDPE ), bags STANDARD EQUIPMENT - Patch handle unit - Handle hole punch - Bottom support welding apparatus - Bottom gusset apparatus - PE side welding (digging) jaw - PE double weld (t-shirt) jaw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2082, total width: 1,700 mm, total length: 5,450 mm, total height: 1,900 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,500 kg, type of input current: three-phase, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Psdpfxozgaw Ho Aahopu Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Lsbrszd N Ipj At Dtgsac Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 3,900 kg, Paper Roll Clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical Condition: Good Description: Year 2019 ISO 3A (51 cm) Capacity 3,900 kg Rotator 360° Opening range 220–1,450 mm Width 1,000 mm ID OS1769 Pedpfx Aasx N U Syjhjpu

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,000 kg, Paper roll clamp Load center: 650 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,000 kg Rotator 180° Opening range 250-1,300 mm Width 1,200 mm ID OS1813 Pedpfjx Racyjx Aahopu

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 3,000 kg, Paper Roll Clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Psdpfx Aasyzdftohspu Technical Condition: good Description: Year 2008 ISO 2A / 3A Capacity 3,000 kg Rotator 180° Opening range 250-1,300 mm Width 770 mm Contact pads 400x250 mm ID OS1936

Condition: used, functionality: limited functionality, Year of construction: 1990, load capacity: 2,700 kg, Paper roll clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Ppjdpfow Dlh Isx Aahou Condition: Limited operational readiness Technical Condition: Poor Description: Year 1990, ISO 4A (61 cm), Capacity 2700 kg / 800 mm, Width 800 mm, Pad 1100x970, ID OS847